Wellgate 26xx Series Manual de usuario
Wellgate 26xx Series
VoIP Gateway
User Manual
Revision Information
Version Date Description
106d Oct-12-2009 4
nd
English Version
1. Introduction ...................................................................................................... 3
1.1 26xx Telephony Gateway.................................................................................. 3
1.2 Benefits .......................................................................................................... 3
1.3 Physical Interface............................................................................................. 3
1.4 Specification.................................................................................................... 4
1. Setting and maintenance..................................................................................
1.6 Environmental .................................................................................................
26xx Technical Manual EN-V106d
1
2. Appearance ....................................................................................................... 6
2.1 Front Panel: LED Indicators............................................................................ 6
2.2 Rear Panel: LED Indicators............................................................................. 7
3. Environment Setup and IP Connection ................................................................ 9
3.1 Configuration................................................................................................... 9
3.2 Network Configuration ................................................................................... 11
3.2.1 WAN Setting ............................................................................................... 12
3.2.1.1 WAN Setting --Static IP .........................................................................................14
3.2.1.2 WAN Setting --DHCP............................................................................................15
3.2.1.3 WAN Setting --PPPoE ...........................................................................................16
3.2.2. LAN Setting ............................................................................................... 17
3.3 General configuration..................................................................................... 19
3.3.1 PABX Mode (Just use 2644 only).................................................................. 19
3.3.2.1 SIP Setting............................................................................................... 20
3.3.3 SIP Advanced Setting .................................................................................. 23
3.3.4 Payload Type Setting ................................................................................... 26
3.3. Line Setting ................................................................................................ 27
3.3.6 Qos Setting................................................................................................. 30
3.3.7 Speed Dial Setting....................................................................................... 31
3.3.8 Caller ID Setting ......................................................................................... 32
3.3.9 CDR Setting ................................................................................................ 34
3.3.10 Syslog Setting ........................................................................................... 3
3.4 Advanced Configuration ................................................................................. 37
3.4.1 System setting ............................................................................................ 37
3.4.2 SNTP Setting .............................................................................................. 41
3.4.3 Codec Setting ............................................................................................. 42
3.4.4 Voice Setting............................................................................................... 44
3.4. Tone Setting ............................................................................................... 46
3.4.6 Phone Setting ............................................................................................. 48
3.4.7 Digit Manipulation ....................................................................................... 0
3.4.8 Dial Plan..................................................................................................... 2
3.4.9 Call routing Editor ....................................................................................... 4
3. Management .................................................................................................
3. .1 Provision Server ..........................................................................................
3. .2 Save-Reload setting..................................................................................... 6
3. .3 Voice File.................................................................................................... 7
3. .4 Upgrade Firmware....................................................................................... 8
3. . Reset to Default.......................................................................................... 9
26xx Technical Manual EN-V106d
2
3. .6 Network Status ........................................................................................... 60
3. .7 Version Info. ............................................................................................... 61
3. .8 Port Status ................................................................................................. 62
3. .8 Password.................................................................................................... 63
3.6 Rebooting the system .................................................................................... 64
Appendix A: How to set the P2P call ...................................................................................65
26xx Technical Manual EN-V106d
3
1. Introduction
1.1 26xx Telephony Gateway
The Wellgate 26xx is an 4 to 8-ports FXS FXO VoIP gateway which includes
1-WAN 4-LAN 10 100 base-T NAT router to meet the current network
environment. Field-proven quality of Voice communication and Fax transmission
over IP broadband access network to makes Wellgate 26xx series to be an
excellent solution for various VoIP applications.
1.2 Benefits
Ideally suited for Enterprise use, rich-feature designed to inter-work with
IP-PBXs for small and middle enterprises.
Carrier-grade features are supported and tested to be fully interoperable with
leading Soft-Switches.
Provide CDR for call shop application.
Superb device for apartment VoIP service.
1.3 Physical Interface
Ethernet port (RJ-45, 10 100 base-T)
1-WAN port, for connect to router, ADSL modem (ATU-R), or switch hub
directly.
4-LAN port, for PC or other network devices connecting.
Telephony port (RJ-11) --- depending on different models
8-FXS ports, to connect with analog phone
8-FXO ports, to connect with PSTN
4-FXO 4FXS ports, to connect with PSTN and analog phone
4 FXO ports, to connect with PSTN
4 FXS ports, to connect with phone
Reset button (Factory Default)
AC power Jack
Status indicated LED
Indicates Ethernet, FXS, and SIP system status
26xx Technical Manual EN-V106d
4
1.4 Specification
IP Network connection
IPv4 (RFC 791)
MAC Address (IEEE 802.3)
PPPoE Client (RFC 2516)
DNS Client
DHCP Client (RFC 2131)
DHCP Server (RFC 2131)
NAT (RFC 1631)
TCP UDP (RFC 793 768)
ICMP (RFC 792)
RTP RTCP (RFC 1889 1890)
SNTP (RFC 2030)
TFTP Client
Telnet Server
HTTP Server
QoS – 802.1Q Virtual LANs
DiffServ (RFC 2475) ToS (RFC 791 1349)
IP Telephony VoIP)
SIPv2 (RFC 3261)
-Session Timer (RFC 4028)
-Privacy Mechanism (RFC 3323)
-Outbound proxy setting for increasing performance, productivity,
and security.
-SIP proxy redundancy- Support Primary and Secondary proxy.
Voice Codecs
-G.711 (a-Law u-Law): 64k bits (PCM)
-G.723.1: 6.3k 5.3k bits
-G.729A: 8k bits (CS-SCELP)
VAD – Voice Activity Detection with Silence Suppression
CNG – Comfortable Noise Generation
Echo Cancellation (G.165 G.168)
Jitter Buffer – Adaptive & Configurable
Packet Loss compensation - increasing voice quality
DTMF: In-band, Out-of-band (RFC 2833), and SIP-Info
Caller Generation Detection – FSK, DTMF
FAX transmission
26xx Technical Manual EN-V106d
5
-G.711 pass-through
-T.38 Fax relay protocol
Tone Generation & Detection
-Ringing Tone
-Ring Back Tone
-Dial Tone
-Programming Tone
Call Features
-Call Hold
-Call Transfer (Blind & consultant)
-Call Forward (Unconditional No Answer Busy)
MWI – Message Waiting Indication
PSTN Routing Prefix (2644 only)
PSTN Bypass when network or system failure (2644 only)
IP line hunting
Adjustable volume level
Security
HTTP 1.1 basic digest authentication for WEB access
MD5 for SIP authentication (RFC 2069 2617)
Password protected Admin access authority
1. Setting and maintenance
Configure & Update method
-Web Browser (HTTP)
-Telnet
-FTP TFTP
Setting parameter Import Export
Voice announcement of IP address
Syslog Client – Debug & CDR (Call Detail Record)
1.6 Environmental
Dimension: 35 × 242 × 160 mm (Desktop)
Weight: 0.935kg (unit)
Operating Temp. & Humidity
-Temp.: 0℃～45℃ (32℉～113℉)
-Humidity: 10％～85% relative humidity, non-condensing
26xx Technical Manual EN-V106d
6
Storage Temp. & Humidity
-Temp.: 0℃～55℃ (32℉～131℉)
-Humidity: 10％～95％ relative humidity, non-condensing
AC Power Adaptor:
-INPUT: AC100V-240V, 50 60Hz
-OUTPUT: DC 12V, 3.0A
Regulatory Compliance: FCC (Part 15, Class B) & CE
2. Appearance
2.1 Front Panel: LED Indicators
Wellgate 2608
Wellgate 2680
Wellgate 2644
LED Description
Power When the power adapter is connected, the LED will light up
green.
Ready When system is startup successfully, the LED will light up
green.
Proxy When the gateway is registered successfully to a Proxy, this
will light up green.
WAN This will light up green when the gateway’s WAN port is
physically connected to the public internet. When data is
transmitted through this port, it will flash green.
The default IP of WAN port is 10.1.1.3.
26xx Technical Manual EN-V106d
7
LAN (1-4) This will light up green when the gateway’s LAN port 1-4 is
physically connected to a local network (Refer to Rear Panel
section in page number for location of LAN port 1-4). When
data is transmitted through this port, it will flash green.
The default IP of LAN port is 192.168.123.123.
T1-T8 The status LED for FXS port 1-8, this will light up amber
orange when the connected phone’s handset is lifted, or when
the connected phone is engaged in a conversation. It will
flash amber orange when there is an incoming call.
L1-L8 The status LED for FXO port 1-8. When there is no PSTN
connected, this LED will become blinking. when PSTN is
connected and no talking, the LED will be off. When a line is
using, the LED will become light up.
2.2 Rear Panel: LED Indicators
Wellgate 2608
Wellgate 2680
Wellgate 2644
Item Description
Reset Press and hold over 5 seconds to reload factory default
setting, this will erase all the settings configured on the
gateway.
T1-T8 The RJ-11 FXS port 1-8, connects analog phone sets, trunk
26xx Technical Manual EN-V106d
8
line in PABX.
L1-L8 The RJ-11 FXO port 1-8, connect to PSTN
T1 P1-T4 P4 It is a pair of FXO and FXS connector. The different is that the
when power off or application is crashed, the FXO and FXS will
be connected together automatically for local surviving.
LAN 1-4 10 100 Base-T RJ-45 socket for LAN port 1-4, connects to
local area network.
WAN 10 100 Base-T RJ-45 socket for WAN port, connects to wide
area network.
DC 12V The power socket, input AC 100V~120V; output DC12V.3A
26xx Technical Manual EN-V106d
9
3. Environment Setup and IP Connection
First of all, connect your computer to Wellgate 26xx’s LAN port by using DHCP.
The IP address assign to your computer should be 192.168.123.x by default.
Once you can get the IP address from Wellgate 26xx, you can start the
configuration as below.
3.1 Configuration
Login to the WELLGATE 26XX web configuration menu
1. Open your WEB browser and key in the default IP address of the gateway
(http://192.168.123.123) in the Address box (see figure below).
3. You will see a pop-up window requesting username and password before you
can login to the web configuration menu. Username is “root” while password is
blank “ “ (see figure below).
Tabla de contenidos
Manuales populares de Puerta de otras marcas
LST
LST M500RFE-AS Manual de usuario
Kinnex
Kinnex Media Gateway Manual de usuario
2N Telekomunikace
2N Telekomunikace 2N StarGate Manual de usuario
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario
Telsey
Telsey CPVA 500 - SIP Manual de usuario
