Welch Allyn SureTemp 4 Manual
MODE
Welch Allyn
®
767 SureTemp 4™ Thermometer System
Directions For Use
© 1995 by Diatek Instruments, Inc., AWelch Allyn Company. All rights reserved. No
part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopy, without prior consent in writing from
Diatek. Printed in the U.S.A.
U.S. and Foreign patents pending.
ThankyouforpurchasingtheWelchAllyn767SureTemp4™
thermometer. The operating and maintenance instructions
found in this manual should be followed to ensure years of
accurateand reliableservice. Please readthese instructions
thoroughlybeforeusingyour767SureTemp4™thermometer.
Technical service manuals may be ordered by contacting
Diatek Customer Service at (800) 854-2904.
TABLE OF CONTENTS
INTRODUCTION ...................................................................................1
SAFETY &WARNINGS .........................................................................2
PARTS ...................................................................................................3
MOUNTINGINSTRUCTIONS ...............................................................4
SETUP ...................................................................................................8
CHANGING PROBES ...................................................................8
FEATURES ............................................................................................9
OPERATION ........................................................................................12
TAKING ORALTEMPERATURES ...............................................13
TAKING RECTAL TEMPERATURES...........................................15
USING MONITOR MODE............................................................16
TAKING AXILLARYTEMPERATURES........................................16
MAINTENANCE ...................................................................................17
CLEANING AND STERILIZATION .......................................................18
CUSTOMER SERVICE ........................................................................18
SPECIFICATIONS ...............................................................................18
LIMITEDWARRANTY..........................................................................19
INTRODUCTION
The Welch Allyn 767 SureTemp 4™ is a wall mounted
thermistor thermometer to be used for measuring patient
temperatures ranging from 84 °F to 108 °F (28.9 °C to
42.2 °C). Oral and rectal probes utilize single-use dis-
posable probe covers which limit cross-contamination.
Oral and rectal temperatures are taken using Normal or
Monitor operating modes. Axillary temperatures are
taken with an oral probe with the unit operating in the
Monitor mode. In the Normal mode, the thermometer’s
microprocessor “predicts” body temperature in about 4
seconds for oral temperatures and in about 15 seconds
for rectal temperatures. The Monitor mode continuously
displays the temperature of the probe which will reflect
the patient’s actual temperature in about 3 minutes and
will continue for as long as the probe remains in place.
SAFETY & WARNINGS
CAUTION: DISCONNECT THE SYSTEM FROM THE
MAINS SUPPLY BEFORE CONNECTING THE 767
SURETEMP 4 THERMOMETER.
USE THE 767 SURETEMP 4 WITH WELCH ALLYN
3.5V 767 SERIES WALL TRANSFORMER ONLY.
DO NOT USE IN THE PRESENCE OF FLAMMABLE
ANESTHETICS.
1
Caution: Federal (USA) law restricts this device to sale by or
on the order of a physician.
In order to obtain accurate and reliable temperature-taking
results and ensure patient safety, it is important that this
booklet be read thoroughly prior to using the instrument. If
you have any technical or clinical questions concerning the
thermometer’s use and/or care, please contact our Cus-
tomer Service Department at (800) 854-2904.
• Single-use disposable probe covers, available from Welch
Allyn or Diatek, will limit patient cross-contamination. The
use of any other probe cover or the failure to use a
probe cover may produce temperature errors and will
invalidate the instrument’s warranty.
• Oral probes (blue ejection button) are to be used for
taking oral and axillary temperatures only. Rectal probes
(red ejection button) are to be used for taking rectal
temperatures only. The use of the wrong probe will
produce temperature errors.
• The thermometer case is not waterproof; do not drip
fluids onto it.
• Do not use this instrument for any purpose other than
that specified in this booklet. Doing so will invalidate the
instrument’s warranty.
• Do not use the thermometer if you notice any signs of
damage to the probe or instrument. Contact our
Customer Service Department for immediate assistance.
• Do not ETO sterilize without using proper procedures
described in the 767 SureTemp 4 technical manual.
2
Figure1
MODE
Display
Probe storage channel
Dual probe cover storage well
Probe connector receptacle
Probe connector receptacle latch
Probe
Probe handle collar
Ejection button
Mode selection button
1.
2.
3.
4.
5.
6.
7.
8.
9.
1
3
2
4
6
78
9
5
3
MOUNTING INSTRUCTIONS
Existing 76710 or 76720 installation:
Unplug the 767 wall transformer from the wall outlet.
Remove the 76710 or 76720 wall transformer from its
mounting plate by pushing upwards on the unit and pulling
it away from the wall mounting plate.
TO POWER
BACKPLATE
4
Fasten the 767 SureTemp 4 thermometer to the 76710 or
76720 wall transformer as follows:
1. Align the thermometer attachment plate within the
groove on the back of the main unit. Line up the
electrical contact blades with the corresponding blade
openings on the main housings.
BACK GROOVEATTACHMENT PLATE
CONNECTION BLADES
767 SURETEMP 4 MODULE MAIN UNIT
2. Slide the 767 SureTemp 4 thermometer into the main
unit until the gap between the devices is closed.
3. Secure the thermometer in place, as shown using the
two Philips head screws provided.
5
4. Reinstall the assembled 767 wall transformer and
thermometer by fitting the keyholes in the wall trans-
former backplate over the screw heads on the wall
mounting plate and pushing downward on the assem-
bly to secure it in place.
New 76710 or 76720 installation:
Follow the Mounting Instructions found in the 767 Diagnos-
tic System owner’s manual to attach the mounting plate to
the wall.
Fasten the 767 SureTemp 4 thermometer to the 76710 or
76720 wall transformer as follows:
1. Align the thermometer attachment plate within the
groove on the back of the main unit. Line up the
electrical contact blades with the corresponding blade
openings on the main housings.
6
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Termómetro de Welch Allyn
Welch Allyn
Welch Allyn SureTemp Plus Manual de usuario
Welch Allyn
Welch Allyn SureTemp 678 Manual de instrucciones
Welch Allyn
Welch Allyn SureTemp Plus Manual de usuario
Welch Allyn
Welch Allyn Diatek 600 Manual de usuario
Welch Allyn
Welch Allyn CareTemp Manual de usuario
Welch Allyn
Welch Allyn SureTemp 679V Manual de instrucciones
Welch Allyn
Welch Allyn CareTemp Touch Free Manual
Welch Allyn
Welch Allyn SureTemp Plus REF 690 Manual de usuario
Welch Allyn
Welch Allyn SureTemp 679 Manual de instrucciones
Welch Allyn
Welch Allyn MicroTymp Manual de usuario
Welch Allyn
Welch Allyn Braun ThermoScan PRO 6000 Manual de usuario
Welch Allyn
Welch Allyn SureTemp 678 Manual de usuario
Welch Allyn
Welch Allyn SureTemp Plus 690V Manual
Welch Allyn
Welch Allyn SureTemp Plus REF 692 Manual de usuario
Welch Allyn
Welch Allyn 767 Manual de usuario
Welch Allyn
Welch Allyn 767 Manual de usuario
Welch Allyn
Welch Allyn 9020 Manual de usuario
Welch Allyn
Welch Allyn 9000 Manual de usuario
Welch Allyn
Welch Allyn Braun ThermoScan PRO 6000 Manual de usuario
Welch Allyn
Welch Allyn SureTemp 986 Manual de usuario
