WEIGL ProCommander LX Manual de usuario
Contents
1 Important Information and Safety Tips...............................7
1.1 FCC and CE Compliance....................................................9
1.2 FCC Instruction to User......................................................9
1.3 FCC DECLARATION OF CONFORMITY ..........................11
1.4 CE DECLARATION OF CONFORMITY.............................12
2 Warranty ............................................................................15
3 ProCommander LX PIN ASSIGNMENTS ...........................17
3.1 ProCommander LX FRONT..............................................17
3.1.1 Pin Assignments FRONT...........................................17
3.2 ProCommander LX BACK................................................21
3.2.1 Pin assignment for Digital Output Circuit ................21
3.2.2 Connection diagram with relays mounted...............28
4 USB –driver installation ....................................................29
5 Modification of the menu of ProCommander LX ..............33
5.1 ProCommander Series.....................................................34
5.2 Menu –LEVEL 1................................................................35
5.2.1 MainSetup –LEVEL 2................................................35
5.2.2 Configure –LEVEL 2..................................................39
5.2.3 Audio –LEVEL 2 ........................................................44
5.2.4 RealTimeClk –LEVEL 2 .............................................49
5.2.5 Info –LEVEL 2............................................................54
6 ProCommander LX configuration...................................... 57
6.1 USB port configuration ....................................................57
6.2 Configuration via configurator .........................................57
6.3 Firmware update ..............................................................61
7 DMX-Read in ...................................................................... 65
7.1 Merge-function .................................................................65
8 Analogue MIN- and MAX-value ......................................... 67
9 Variable.............................................................................. 69
10 Control.ini ........................................................................ 71
10.1 Structure of the Control.ini file ......................................72
!i: Event related to the remote inputs 1-16.......................72
!t: Time events....................................................................72
!rc: Time-controlled events with the internal real time clock
.............................................................................................73
!v: Variable events..............................................................75
11 Playlist functions ............................................................. 79
12 Folder structure of the Flash Card .................................. 81
13 Programming the ProCommander LX ............................. 83
14 Network connection between ProCommander LX and Pro
I/O ......................................................................................... 85
15 Interface protocols........................................................... 89
16 Appendix ..........................................................................91
16.1 Measurements................................................................91
16.2 Pin assignment DMX-OUT.............................................92
16.3 Pin assignment DMX-IN.................................................92
16.4 Assignment Remote 1-16, Open-Collector 1-16...........93
16.5 Assignment Relay 1-8, Open-Collector 9-16.................94
16.6 Pin assignment RS232-2 / RS232-3...............................95
17 Glossary ...........................................................................97
18 Index.................................................................................99
Important Information and Safety Tips
7
1 Important Information and Safety Tips
The ProCommander LX is an electronic device that can fail,
in part or in full despite careful testing. Therefore, it must not be
used in applications where personal safety could be at risk due
to the malfunction of the device.
Weigl equipment is generally not designed, intended,
authorized or warranted to be suitable in life support
applications, devices, systems, or other critical applications.
Inclusion of Weigl equipment in such applications is understood
to be the full risk of the customer.
Weigl assumes no liability for applications assistance,
customer produced design, software performance or
infringements of patents or copyrights.
Weigl does not warrant or represent that any license, either
expressed or implied, is granted under any patent right,
copyright, mask work right, or other intellectual property right
of Weigl covering or relating to any combination, machine or
process in which Weigl products or services might be or are
used. The ProCommander LX must not be directly connected to
voltages greater than 24V.
It is important to read this manual and familiarize yourself
with the function of the ProCommander LX before working with
the device. Failure to do so may cause damage to the
ProCommander LX or connected components.
Important Information and Safety Tips
8
Only experienced personnel should connect the
ProCommander LX to other systems that comply with required
safety regulations.
External power sources connected to the ProCommander LX
must not exceed the maximum allowable voltage (24V) and
must be protected accordingly. In addition, correct polarity must
be utilized to avoid damage to the ProCommander LX. Failure
to do so will void the warranty and Weigl Works, LLC or Weigl
will not be liable for any resulting damages.
When connecting solenoids, a freewheeling diode for each
solenoid is required. They should be mounted as close as
possible to the solenoid. Please refer to the wiring diagram in
the manual. If this is not observed, the output driver will be
destroyed and will void the warranty.
The ProCommander LX should not be exposed to extreme
heat or humidity before, during or after installation. If the device
is used for outdoor installations, it must be protected with
proper weather proofing enclosures. Direct sunlight may also
lead to overheating.
Damages caused by improper handling, improper wiring or
improper use will void warranty and Weigl Works, LLC or Weigl-
EM will not be held liable.
Weigl tried in all conscience to ensure, that the information
in this manual is accurate. Please note that all information is
subject to change.
Important Information and Safety Tips
9
1.1 FCC and CE Compliance
Weigl ProCommander's 2 have been tested to comply with
FCC and CE requirements.
The ProCommander LX is low voltage DC devices and
therefore, neither UL nor CE require safety testing. For
fireproofing or additional radio frequency interference shielding,
the ProCommander LX can be rack mounted in a 19“rack space
with optional hardware.
1.2 FCC Instruction to User
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Important Information and Safety Tips
10
Increase the separation between the equipment and
reconnect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
This equipment has been verified to comply with the limits
for a class B computing device, pursuant to FCC Rules. In order
to maintain compliance with FCC regulations, shielded cables
must be used with this equipment. Operation with non-
approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned
that changes and modifications made to the equipment without
the approval of manufacturer could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference and (2) this device
must accept any interference received, including interference
that may cause undesired operation. This Class B digital
apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Otros manuales para ProCommander LX
1
Tabla de contenidos
Otros manuales de Controladores de WEIGL
