WE-EF KTY234 Manual de usuario

Surge Protection

For comprehensive protection of a luminaire installation against lightning and

electrical surges, it is essential to cover mains supply and data input lines at

the distribution board level, by using respective primary (Type 1) and

secondary (Type 2) surge arrestors in compliance with EN61643-11/

IEC61643-1.

Warning

Ensure that all required surge protection measures are in place and activated

prior to luminaire installation. Also, disconnect luminaires before operating

high-power devices such as, for example, electrical arc welders.

Do not open during installation

This product is factory-sealed.

Refer to the instructions contained in this

document for details.

Installation tools

Mounting hardware used on this product

includes fasteners with hexalobular socket

heads (ISO 10664). Installation requires the

use of matching tools.

Bollard

WE-EF LIGHTING

Installation and Maintenance

Instructions

INSTALLER

HOTLINE

+61 458 933 399

7am – 7pm AEST

KTX234 LED

KTY234

LED

ZFY23

LED

CFY259

LED

300-0461 3.2

ESV4

1000

ø 180

600

ø 180

H kg

600 7.8

1000 8.9

IP66, Class I (Class II, III available on request), ta = 25°C

H = 600 mm

ZFY230

Bollard

H = 1000 mm

ZFY230

for

ZFY230

for

ZFY230

Weight

ESV4

for ZFY230

Planted root

– Galvanised steel.

Accessories:

ESV4

kgH

600 6.8

1000 8.9

300-0461 3.2

Bollard

270

ø 180

KTX234

H = 270 mm

for KTX234 270 4.5

Weight

IP66, Class I (Class II, III available on request), ta =

25°C

H = 600 mm

KTY234

H = 1000 mm

KTY234

for KTY234

ESV4

for KTY234

Planted root

– Galvanised steel.

Accessories:

685

ø 240

1085

65°

ø 190 ø 240

ESV4

Weight kgH

for CFY259 600 15

for CFY259 1000 18

Accessories:

Planted root – Galvanised steel.

ESV4 for CFY259 300-04644.4

Bollard

CFY259

H = 685 mm

CFY259

H = 1085 mm

CFY259

H600 / 6 LED

CFY259

H1000 / 2x6 LED

WARNING : HEAVY ITEMS

Ensure correct handling

techniques are used

IP66, Class I, (Class II, III available on request) ta =

25°C

rotate anti-clockwise until it can be lifted up.

To remove the head of the luminaire during maintenance, loosen screw

with a Torx T-20 tool and

Do not use high-pressure cleaners.

Apart from cleaning the product’s exterior surfaces, no special maintenance work is required.

Maintenance

LED

Light Source

In case of component failure due to abnormal circumstances or at end of life, replacement must be carried out

E\DVXLWDEO\TXDOLƂHGDQGWUDLQHGSURIHVVLRQDO

Warning: Do not open the luminaire or remove the bollard head while mains supply is switched on.

The luminaire head unit Bis factory sealed, warranty will be void if opened without authorisation from WE-EF

Lighting or nominated agent.

'Rear' of

Bollard

'Front' of

Bollard

ZFY230/CFY259 Head

KTY234 Head

To remove head To insert head

into the body and v rotate clockwise. When seated,

wsecure

the head

by tightening screw

bollard body. To re-attach the head, align it to the bollard post as shown below,

drop the head

jRelease the grub screw

and

twist the head counter-clockwise, then

lift the head off the

Head Removal

bollard

with the WE-EF logo at the front of the bollard.

For ZFY230/CFY250, The bollard post should be mounted that the grub screw

is the back of the

is secure by ensuring head cannot be rotated once grub screw secure.

For

KTY234, ensure that the slim shield on the LED head lines up to the grub screw

X. Confirm head

To remove head To insert head

Installation

The product must be installed and maintained by a

VXLWDEO\TXDOLƂHGSURIHVVLRQDOLQFRPSOLDQFHZLWKODWHVW

building/construction and/or electrical regulations and

relevant legislation.

Warning: Switch off and isolate the mains electrical

supply prior to installing and connecting the luminaire.

Notice:,IWKHOXPLQDLUHLVPRGLƂHGE\DQ\ERG\RWKHU

than the original manufacturer, then the warranty will

no longer be valid and shall become the full respon-

sibility of the modifying person/organisation. Claims

based on defects attributable to improper installation

and/or application, and the consequences thereof, are

excluded.

If the supplied cable of the KTX luminaire is damaged,

it must be replaced by WE-EF or a WE-EF authorized

agent.

head retention screw

secure by tightening screws

(not KTX) and the

Return head of luminaire

to bollard post

and

= 1-10V control line).

Earthing, DA/DA = DALI control line, D-/D+

1-10V/DALI (L = Phase, N = Neutral, =

Earthing)

ON/OFF (L = Phase, N = Neutral, =

the terminal

block:

Wiring is as

follows and should match the labels on

junction box

(not supplied)

as per Fig. 3.

and must be connected via a compliant

IP67

clamp

Note :

The KTX

does not have the

gear tray

the underside of the head

B, and is secured by the

supply terminal block located on the gear tray

As per Fig. 2 Connect luminaire cable

to mains

the head retention screw

is positioned.

on KTX). Note that the rear of the bollard is where

the base with retention bolts

(base is integrated

and tightening bolts

and the post

is attached to

Set cast base

in position and secure by inserting

(see previous page).

rotating it anti-clockwise until it can be lifted up

after loosening screw

with

Torx T-20 tool and

Remove head of luminaire

from bollard post

mains cable length are provided.

(QVXUHWKDWDVROLGIRXQGDWLRQDVZHOODVVXIƂFLHQW

A suitable recess to be provided for planted root

conforms

with mains electrical supply.

Checkthat

rating

shown

luminaire

label2)

Switch off

and isolate the

mains electrical supply.1)

maximum stability.

incorporate the optional planted root to ensure

to an even surface, however it is recommended to

The luminaire is suitable for installation directly on

Installation Procedure

)

DC (+ = Positive, - = Negative)c

Torque:

Screw Torque

M4 max. 2.0 Nm

M5 max. 4.0 Nm

M6 max. 6.0 Nm

M8 max. 15.0 Nm

M16 max.100.0 Nm

Fig. 1

Fig. 2

Fig. 3

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Luz exterior de WE-EF

WE-EF

WE-EF DOC100 LED Series Manual de usuario

WE-EF

WE-EF LTC440 Manual de usuario

WE-EF

WE-EF PSY414 Manual de usuario

WE-EF

WE-EF ESC100 LED Series Manual de usuario

WE-EF

WE-EF ETC130 Manual de usuario

WE-EF

WE-EF KTY234 LED Manual de usuario

WE-EF

WE-EF PIA230 LED Manual de usuario

WE-EF

WE-EF PSY424 LED Manual de usuario

WE-EF

WE-EF ETC300 LED Series Manual de usuario

WE-EF

WE-EF KTX234 LED Manual de usuario

WE-EF

WE-EF ALP500 LED Series Manual de usuario

WE-EF

WE-EF ZFY230 LED Manual de usuario

WE-EF

WE-EF PFL230 LED Manual de usuario

WE-EF

WE-EF LTM444 Manual de usuario

WE-EF

WE-EF CTY150 Manual de usuario

WE-EF

WE-EF ALP534 LED Manual de usuario

WE-EF

WE-EF LTM440-FT Manual de usuario

WE-EF

WE-EF FLA780 Manual de usuario

WE-EF

WE-EF FLA740 LED Manual de usuario

WE-EF

WE-EF PLS400 Series Manual de usuario

WE-EF

WE-EF AFL100 Series Manual de usuario

WE-EF

WE-EF ETC100-GB LED Series Manual de usuario

WE-EF

WE-EF STO Series Manual de usuario

WE-EF

WE-EF LEUCHTEN AFL100 Series Manual de usuario

Manuales populares de Luz exterior de otras marcas

Sealey

Sealey LED37 Manual de usuario

nordlux

nordlux VEJERS Guía del usuario

SImx

SImx ELITE LED LHTC637 Manual de usuario

GEV

GEV CAROLINE 10833 Manual de usuario

NEBO

NEBO NEB-LSP-0020 Manual de usuario

Lindby

Lindby 9949029 Manual de usuario

HEPER

HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento

HEPER

HEPER LW8034.003-US Instrucciones de instalación y funcionamiento

Maretti

Maretti VIBE S 14.6080.04.A Manual de usuario

BEGA

BEGA 84 253 Manual

HEPER

HEPER MINIMO Instrucciones de instalación y funcionamiento

LIGMAN

LIGMAN BAMBOO 3 Manual de usuario

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manual de usuario

urban ambiance

urban ambiance UQL1273 Manual de usuario

TotalPond

TotalPond 52238 Manual de usuario

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manual de usuario

LIGMAN

LIGMAN DE-20023 Manual de usuario