Wave Italy IMPETUS Manual de usuario
Installation, use and maintenance manual EN
WAVE IMPETUS WAVE FORCE
Pedal Set for Virtual Simulation
Contents
Manual information............................................................................3
Product information...........................................................................3
Equipment .............................................................................................4
Product Description............................................................................6
WAVE IMPETUS pedal set............................................................ 6
WAVE FORCE pedal set................................................................ 6
Installation .............................................................................................7
Base assembly............................................................................... 7
Assembly of the additional heel pad support ....................... 8
Installation heights of the base ................................................ 9
Pedal assembly........................................................................... 10
Customised base ........................................................................ 11
Pedal connections............................................................................ 12
Pedal calibration ............................................................................... 13
Settings and calibration........................................................... 14
Accelerator................................................................................... 14
Brake ............................................................................................. 15
Clutch (WAVE IMPETUS set with 3 pedals) ...........................15
Clutch (WAVE FORCE set with 2 pedals) ...............................16
Functional test ............................................................................ 17
Pedal adjustment ............................................................................. 18
Accelerator pedal adjustment.................................................18
Brake pedal adjustment ........................................................... 20
Clutch pedal adjustment.......................................................... 22
Suspended pedal set base accessory........................................ 23
Equipment ................................................................................... 23
Assembly of the suspended pedal set base..........................24
Installation heights of the base ..............................................26
Pedal assembly........................................................................... 27
Adjusting the heel pad supporting plate.............................. 28
Adjusting the angle of the pedal set...................................... 29
Adjusting the height of the pedal set. ...................................29
Technical data.................................................................................... 30
Maintenance ...................................................................................... 30
Product compliance ....................................................................... 30
Troubleshooting ............................................................................... 30
Warranty terms.................................................................................. 31
Copyright............................................................................................. 31
Disposal................................................................................................ 31
Customer Services contacts.......................................................... 31
3 - EN
Dear customer,
thank you for choosing the quality and professionalism of Wave S.r.l.
Our virtual simulation pedal set is designed to ensure an in-
creasingly realistic driving experience.
Before you install or use the product, please carefully read the
manual which will provide all the information required for the
rst installation, the possible congurations of the pedal set
and its use.
Manual information
This documentation must be printed and kept in a safe place
for reference at all times. It must be considered an integral part
of the product and must be transferred with it if it is sold.
The illustrations contained in this manual are for information
purposes only and are not binding. Wave S.r.l. reserves the right
to make any changes to the contents of the manual without
prior notice. The product specications are subject to change
without prior notice due to continuous product improvement
and renement. Therefore this documentation may dier
slightly to the characteristics of the product. Any substantial
changes to the product will in any case be accompanied by
appropriate documentation to be integrated in this manual.
The source language of the content related to this Wave s.r.l.
documentation is Italian.
Product information
The product has been designed and manufactured to be used
in indoor places protected from rain.
Always earth the pedal set with the cable provided.
Do not expose to direct sunlight and heat sources.
Do not leave the product in a damp place or exposed to dust.
Do not immerse or wet the product with liquids.
Do not use this product if it is damaged.
4 - EN
Equipment
1Clutch pedal
2Brake pedal
3Accelerator pedal
4USB connection cable
5kit for alternate conguration
6Package with required hardware
7Heel backing plate
8Side supports for base
9Base for pedals
10 Base angle pieces
11 Additional heel pad support
12 Connector plug for clutch axis (only for WAVE FORCE)
The pedals contained in the package will dier depending on
the conguration chosen upon purchase.
The brake pedal can be congured according to your driving
style by mounting internal modules that modify the pedal
feedback.
The pedals are included with the standard adjustable base for
installation on the oor or on simulation platforms.
Wave S.r.l. also provides the suspended pedal set support for
traditional seats. The accessory is sold separately and the in-
stallation instructions are given in the nal chapters of this user
manual.
5 - EN
1
2
3
4
5
6
7
8
9
10
11
12
6 - EN
Product Description
WAVE IMPETUS pedal set
3-pedal set for virtual simulation made entirely of anodised
aluminium for maximum movement accuracy, long service life
and a high level of reliability.
The pedal set features the complete conguration of the device
with accelerator, brake and clutch.
WAVE FORCE pedal set
2-pedal set for virtual simulation for driving with accelerator
and brake only.
High-quality materials and sleek design for a product that ex-
presses its value just like the best professional pedals installed
on real cars.
7 - EN
Installation
Base assembly
The pedals must be installed on a solid support base that does
not compromise the ergonomic characteristics and accuracy of
the product.
The base supplied features guides used to position the pedals
according to a set or customised distance according to cus-
tomer comfort. It is also possible to adjust the inclination of the
base to optimise the quality of the guide.
The presence of the heel backing plate increases the comfort
during intense simulations, as it helps the foot maintaining a
correct position during the performance.
Follow the instructions shown in the gure to mount the sup-
plied base.
Wave S.r.l. oers the customer additional adjustable sup-
ports, designed and built for an increasingly real experience.
1
1
1
2
1 2 3 4
M6x16 Ø6 Ø6x18
x 6
M6x20
x 4 x 10
5
M6
x 10x 2
2
2
1
1
3
3
3
3
3
3
5
5
5
3
3
5
4
5
5
5
5
1
2
4
3
5
8 - EN
Side supports are changeable to allow locating the xing trails
on the pedestal, either inwards or outwards.
Assembly of the additional heel pad support
An additional support for assembly on the heel pad is provided
for driving in greater comfort. It improves the position of the
foot by bringing it further forward.
Follow the instructions shown in the gure to mount the
additional support. Put it in place using the holes at the same
height.
1
M6x16
x 2
2
x 2
Ø6
3
x 2
M6
1
2
3
2
1
3
9 - EN
Installation heights of the base
The holes in the base shown in the gure are for installation on
a simulation structure or on xed supports.
• View from above: pedal set with assembly of the set sup-
ports with aps facing inwards
• View from below: pedal set with assembly of the set sup-
ports with aps facing outwards
!Do not use the product for purposes other than those relat-
ing to virtual simulation.
!The pedals must be parallel to the leg during use. Do not
install the base with the pedals tilted or in any manner that
does not observe the above rule.
15 mm 250 mm
15 mm 250 mm
317 mm382 mm
10 - EN
Pedal assembly
Mount the pedals using the screws provided.
The base features 2 types of guides to install the pedals. The
rst type, featuring multiple slots, ensures optimal positioning
of the pedals according to experience and the tests on the
pedal set conducted by Wave S.r.l .; the second type, featuring
a single pair of slots, allows the user to position the pedals as
needed.
!The pedals must be parallel to the leg during use. Do not
install the pedals if they are tilted or in any manner that does
not observe the above rule.
Follow the instructions shown in the gure to adjust the incli-
nation of the base. The position must be at the same height in
both side supports.
M6x16 Ø6
x 9 x 9
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
