wanscam AJ series Manual de usuario
Wanscam IPCAM User Manual
1
Wireless/Wired Network IP Camera
Night Vision & Remote Operation
User Manual
Wanscam IPCAM User Manual
2
Thank you for buying our IP camera.
Wanscam AJ Series IP Camera products are designed and equipped for local and
remote network video surveillance system, including wired IP bullet camera, wireless IP
bullet camera, IP IR dome camera, IP IR waterproof camera, IP Pan/Tilt/Zoom Camera etc.
We adopt high performance chip to ensure high quality media processor which processes
audio and video collection, compression and transmission. Standard M-JPEG compression
format ensures clear and streaming video performance. It enables users to view live video
via IE6.0, IE7.0, IE8.0, Firefox, Google browser or other standard browser.
Wanscam AJ series IP Camera products are applicable for big, medium-sized and
small enterprises, chain store, factory, home and all kinds of spots where remote network
video transmission and control supposed to be installed, they are easy to be installed and
operated. Before the installation of the IP camera, please check if your product accessories
in the package are complete
Product Components
IP Camera ---------------------------------------------------------------------------------1 PC
Bracket（optional）---------------------------------------------------------------------1 PC
Power Supply- ----------------------------------------------------------------------------1 PC
Warranty Card-----------------------------------------------------------------------------1 PC
Certificate of Quality---------------------------------------------------------------------1 PC
CD-------------------------------------------------------------------------------------------1 PC
Wanscam IPCAM User Manual
3
Table of CONTENTS
1. Introduction ........................................................................................................4
1.1. Safety Introduction .........................................................................................5
1.2. Product Specifications................................................................................. ....5
1.3. Applications……….. ..................................................................................... .5
1.4. System Requirements……….. ........................................................................6
2. Products Panels and Controls .............................................................................6
2.1. Main Interface Introduction of AJ Series Products.................................... .....8
3. Installation ..........................................................................................................9
3.1. Connecting you camera to your local network ................................................9
3.2. Connecting Your Camera To Your Local Network-Continued......................11
4. Prompting the necessary ActiveX controls.......................................... .............12
4.1 Prompting the necessary ActiveX controls-continued...................... ..............13
5. Logging into your camera from a local internet location.................................. 13
6. Enabling wireless connection using a wireless router........................................14
7. Configuring the remote access............................................................................15
8. Main menu interface operation..........................................................................17
8.1. Manager Operation...................................................................... ..................19
8.1.1. Basic Network Settings......................................................................... .......20
8.1.2. Basic Network Settings................................................................. ...............21
8.1.3. Wireless Setting.............................................................................. .............22
8.1.4. ADSL Setting................................................................................................22
8.1.5. Dynamic DNS Setting (DDNS)....................................................................22
8.1.6. E-mail and FTP service Settings...................................................................23
8.1.7. Alarm Service Settings.................................................................................24
8.1.8. Reset/Firm Ware Upgrade ...........................................................................25
8.1.9. Restore Factory Settings ..............................................................................25
8.1.10. Reboot Equipment .....................................................................................25
9 Warranty .............................................................................................................26
Wanscam IPCAM User Manual
4
General Introduction
IP Camera is a new generation product with the combination of analog camera &
IP video technology. Despite all functions which analog cameras have, IP camera can
compress and encrypt video and audio signal then send it to remote terminals through
internet with its built-in processor and web server. With its IP address, users can use
standard PC browser to visit IP camera, real time monitor targets, manage and store
video or image, PTZ control also is available through network.
As a new member in camera family, IP camera shares the same operation function
with the analog camera, such as, auto white balance, auto shutter speed, AGC, auto
backlight compensation etc. On the other hand, IP camera supports remote access
through internet, and support multi-user visit, some IP cameras are able to extend to
both analog and digital signal.
The core of Wanscam AJ series IP cameras is 32Bit RSIC, adopts standard MJPEG
compression format, camera sensor is CMOS, support auto white balance and backlight
compensation, support internet browser, and cell phone view. In general, according to the
function of audio simplex & duplex, infrared, wired, wireless, POE, PTZ, local storage, it
has hundreds of products, to meet requirements of high, middle, low ranks of users.
Wanscam IPCAM User Manual
5
1. Introduction
1.1 Safety Instructions
(1). Use the proper power source.
Do not use this product with a power source that supplies more than the specified
Voltage(100-240V AC).
(2). Never insert anything metallic into the camera.
Inserting metal object into the camera can be a source of dangerous electric shock.
(3). Do not operate in wet or dusty environment.
Avoid places like a damp basement or dusty hallway.
(4). Do not attempt to disassemble the camera.
You may be subjected to severe electrical shock if you attempt to take apart the camera
while the camera is connected to its power source. If there are any unusual sounds or
smells coming form the camera, unplug it immediately and contact Customer Service.
(5). Handle the camera carefully
Dropping the camera on any hard surface may cause a malfunction. If the camera does
not work properly due to physical damage, please contact Customer Service for repair or
exchange.
(6). Apply to FCC and CE Rule
This device complies with part 15 of the FCC and CE Rules. Operation is subject to the
following two conditions:
1: This device may not cause harmful interference.
2: This device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This equipment
complies with FCC and CE radiation exposure limits set forth for uncontrolled
environment. This equipment should be installed and operated with minimum distance
20 cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
1.2. Product Specifications
*- Adopt high Performance, strong function media processor 32Bit RSIC
*- High sensor CMOS
*-Adopt optimized MJPEG video compression algorithm, realize high-definition images
transmission in narrow bandwidth;
Wanscam IPCAM User Manual
6
*-Maximum support 15 users viewing at the same time, no limit for users if using
forwarder
Server function;
*- Built in Web Server, convenient for users to use standard browse to realize the
real time monitoring and setting administration;
*-Support WIFI：802．11b/g wireless networking;
*-Support remote system update;
*-Support DDNS analysis, support LAN & Internet (ADSL,Cable Modem)
*-Support variety of network protocol: TCP/IP, UDP, SMTP, PPPoE, Dynamic DNS,
DNS Client, SNTP, BOOTP, DHCP, FTP, SNMP, WIFI/802. 11b/g
*-Parts of modes products support one/ two way audio, talkback;
*-Support motion detection alarm function (area & sensitivity Configurable);
*-Support image snapshot
*-Abnormal automatic recovery function, auto reconnection available when network
Interruption occurred.
*-Dynamic alarm function, alarm time-schedule configurable.
1.3. Applications
Wanscam AJ series products are ideal choice for big department, chain store,
supermarket, home, factory, workshop etc.
1.4. System Requirements
Wanscam IPCAM User Manual
7
2. Products Panels and Controls .
There are two kinds of the panels of Wanscam AJ series IP camera mailly divided into
two kinds:one is body guard interface, the other is the extend line interface, set two
representative products as examples, to give explanation:
*Non-extended line IP Camera icon *Extended line IP Camera icon
Wanscam IPCAM User Manual
8
2.1. Main Interface Introduction of AJ Series Products
*Non-extended line IP Camera Tailgate
1: Audio Out , 2: Audio In
3: Ethernet interface: RJ-45 interface. Power Supply Light: constant on after power up
Network light: constant sparkle after power up data transmission.
4: Antenna:
5: Power input interface: connect direct current 5V Power
*Extension line interface definition icon:
Wanscam IPCAM User Manual
9
Extension Line Of AJ Series
Power: direct current 12V.
Reset line: two reset line short circuit, equipments restore to ex- factory standards.
Ethernet interface: RJ-45 network interface.
3. Installation
3.1 Connecting you camera to your local network
When installing the camera to the local network for the first time, the camera must be
connected to an Ethernet input on your router so that your network can locate your
camera.
1. Power on the camera in close proximity to your router.
2. Directly connect your camera to your router using the Ethernet cable.
If the yellow and green indicator lights on the camera are blinking, then your camera is
successfully communicating with your router.
3. Insert the software CD (included ) into your PC.
Wanscam IPCAM User Manual
10
4. Run the program labeled “OCX Setup” form the file folder on the software CD.
5. After the “OCX Setup” program has installed. Please run the “Search Tool” software.
This software is used to search the IP address of the ip camera in your local network.
Note: “Search Tool” Software no need to install, if you need it , you can copy it to your
desktop of your PC.
6. Click “Find” to find the IP Camera on your router. (If you have several items on your
router, check the bottom of the camera for the factory IP setting.)
7. Once you have located the camera on your router, open the command prompt (cmd).
8. From the Command Prompt, type in “ipconfig” then press Enter.
Otros manuales para AJ series
9
Tabla de contenidos
Otros manuales de Cámara de seguridad de wanscam
