WamBam Jiminy Picket Manual de usuario

REALLY

Jiminy Picket

Vinyl Gate

Important stuff to know about

installing your WamBam gate.

CLEVER JOE

Your Installation Buddy

1-877-778-5733

www.wambamfence.com

November 2014

Reality Check

For installation videos and more information,

visit www.wambamfence.com

1 - Read Over Fence Instructions First

Your gate and fence will work better together as an

integrated

solution if you rst take the time to read and understand your

fence instructions. Especially pay attention to the principles

of anchor installation.

2 -

Do a Dry Run First on the Gate Frame

Only (not pickets or boards)

Please do not glue or screw your gate frame together until you

have rst temporarily assembled the gate. In other words,

do a dry run rst.

This will ensure three things:

a) That you have everything necessary to complete the gate.

b) That you will have assembled the gate in the correct order.

c) All the pieces t and function properly.

It’s easier to trouble shoot when things are not glued and screwed together.

After you assemble your gate correctly, please disassemble as necessary and

use glue and screws to permanently assemble the gate.

3 - Ideally, Install Your Gate Anchors

Before Your Fence Anchors

Your fence panels will be more forgiving for a custom t than

your gate. Ideally, position and install your gate anchors

before you do anything else, or very early on in the

process of setting up your fence run.

Install Your Gate Anchors

Before Installing Your

Fence Anchors.

4 -

Ideally, Do Not Hang Your Gate System Off a Single

Non-Supported Post.

Your gate will perform better and last longer if your hinge post is connected to a panel of fence which is

connected to another post. The weight strain will be transferred unto two posts versus just one. Installing

fence panels on both sides of your gate is the ideal in all situations. If this is not possible because of space

restrictions, please contact us for alternative solutions to overcome.

For installation videos and more information, visit www.wambamfence.com





For installation videos and more information, visit www.wambamfence.com

103.75 in

2.0 in

1.125 in 1.75 in 1.125 in

Ground

5 -

Double Gate Applications:

You can use two standard gates to create wider opening up to 100”. More details are included at the back

of this manual on how this can be accomplished.

120 in [10 ft]

1 5/8 in

WOOD JIG: Purchase separately 4x4 pressure-treated wood and drill holes as illustrated.

(Dispose vinyl jig included with gate kit)

Top View of Wood Jig

Metal Post Stabilizers

Wood Jig

100 in

103.75 in

8.25 in 8.25 in

.090in.wall

thickness

For installation videos and more information,visit www.wambamfence.com

Each Gate Box Includes:

• Gate Caps (2)

• T-Brackets (2)

• Gate Hinges (2)

• Picket Caps (7)

• Top Rail (1)

•

Gate Latch (1)

• Vertical Stiles (2)

• Pickets (7)

• Stainless Steel Screws (20)

• Gate Brace (1)

• Gate Bottom Brackets (2)

• Bottom Rail (1)

• Gate Jig (1)

Sold Separately:

• Posts

• WamBam Anchors

• Post Caps (3 options)

Box Contents

Jiminy Picket Vinyl Gate

Cap'n Jack Cap'n America Cap'n Morgan

.050in.wall

thickness

• Tubes of Glue (2)

• Metal Post Stabilizer (1)

• Tek Screws (4)

Jiminy Picket

Vinyl Gate

PRODUCT OVERVIEW

For installation videos and more information, visit www.wambamfence.com

Ground

WamBam Anchor

3.5in.

48in.

7.75in.

24.75in.

4in.

47.5in.

1.5in.

3.5in.

1.5in.

2in.

3in.

22in.

50in.

54.5in.

48in.

50.5

Gate InstallationGate Assembly

A B

C D

3.5in.

1.5in.

.090in. wall thickness

1.5in.

3.5in.

2.89in.

3in.

33in.

For installation videos and more information, visit www.wambamfence.com

Customize Your

Gate Design

Jiminy Picket Vinyl Gate

Use The Cutting Guide Below To Trim Pickets

to Create A Custom Gate Design

37 1/8in.

40 3/8in.

42 3/8in.

43 1/8in.

This Gate Can Also Be Trimmed

Down Both in Width and Height to

Accomodate Custom Applications.

Please Note:

Cut down the vertical stiles by 6in.

B -

Identify the location of the metal post stabilizer

and pound flush into the ground

E -

Pound your anchors into place

C -

Place vinyl gate jig over the metal post stabilizer

Metal post stabilizer

to be used only

on hinge post

Pegs on the bottom of this anchor

positioner will insert into both

vinyl gate jig and post stabilizer.

See fence instructions if

necessary for more information

on how to install anchors, adjust

leveling donuts and install

vinyl posts.

Bottom of trench

should be level.

Excavate & Install Gate Jig,

Anchors, & Fence Posts

D -

Place anchor positioners into gate jig

5 1/2in.

Dig a Trench 60in.

long x 6in. wide

x 5.5in. deep

A - Identify location of your gate

Temporarily place the anchor positioner into

the metal post stabilizer and determine position.

For installation videos and more information, visit www.wambamfence.com

G - IMPORTANT:

Make sure to fasten the

fence panels BEFORE attaching the gate

F - Backfill excavated dirt over gate jig

Detailed Installation

Instructions

Jiminy Picket Vinyl Gate

STEP 1

For installation videos and more information, visit www.wambamfence.com

Completely assembled gate shown A - Run bead of vinyl weld continously around

the inside of the gate bracket

C - Insert the bottom rail ALL the way until it

BOTTOMS OUT INSIDE GATE BRACKET

D - Insert vertical gate stiles. They will bottom-

out against bottom horizontal rail

C D

B - Insert the bottom rail ALL THE WAY until it BOTTOMS OUT inside gate bracket

Jiminy Picket Vinyl Gate

Assemble the Gate Frame Bottom & Sides

STEP 2

Note that the bottom rail

is ribbed internally.

GLUE

Fasten gate brackets

to internal members

though inside of frame

using screws.

Did you do a dry run of assembly first?

Please read page 1 of instructions.

GLUE

Handle with care: vinyl weld

glue takes approximately

five minutes to cure.

IMPORTANT!

For installation videos and more information, visit www.wambamfence.com

A - Run bead of vinyl-weld continously around

the inside of the bracket B - Insert top rail ALL THE WAY until it

BOTTOMS OUT inside bracket

E - Slide brackets with toprail attached down over

the vertical gate stiles

E - Completely assembled gate frame shown

C -

Insert rail ALL THE WAY until it BOTTOMS OUT

inside bracket (glue first)

Jiminy Picket Vinyl Gate

Assemble the Gate Frame Top & Attach to Sides

STEP 3

D - Run a bead of vinyl-weld continuously around

the inside of the brackets

GLUE

Did you do a dry run

of assembly first?

Please read page 1

of instructions.

IMPORTANT!

Otros manuales de Cercas y portones de WamBam

WamBam

WamBam NERVOUS NELLY Manual de usuario

WamBam

WamBam BL19101 Manual de usuario

WamBam

WamBam VF14300 Manual de usuario

WamBam

WamBam Nervous Nelly Vinyl Gate Manual de usuario

WamBam

WamBam VG24100 Manual de usuario

WamBam

WamBam TRADITIONAL CLASSIC VF13003 Manual de usuario

WamBam

WamBam VF13002 Manual de usuario

WamBam

WamBam Slim Jim Aluminum Gate Manual de usuario

WamBam

WamBam EVEN STEVEN Manual de usuario

WamBam

WamBam VG26300 Manual de usuario

WamBam

WamBam Yard & Pool Vinyl Gate Manual de usuario

WamBam

WamBam VG26100 Manual de usuario

WamBam

WamBam Steady Freddy Manual de usuario

WamBam

WamBam BL19101 Manual de usuario

WamBam

WamBam PEEPING TOM VF16200 Manual de usuario

WamBam

WamBam VF13007 Manual de usuario

WamBam

WamBam JIMINY PICKET VG24300 Manual de usuario

WamBam

WamBam VG26200 Manual de usuario

WamBam

WamBam AG14002 Manual de usuario

WamBam

WamBam NERVOUS NELLY Manual de usuario

WamBam

WamBam PLAIN JANE VF14200 Manual de usuario

WamBam

WamBam NERVOUS NELLY VG25100 Manual de usuario

WamBam

WamBam Steady Freddy Manual de usuario

WamBam

WamBam Plain Jane Vinyl Gate Manual de usuario

Manuales populares de Cercas y portones de otras marcas

Casanoov

Casanoov KIT-000045 Manual de usuario

Heras

Heras SHB21 Manual de usuario

Casanoov

Casanoov VOGEL 350C140 Manual de usuario

DITEC

DITEC Silver 1B/40B Manual

Casanoov

Casanoov EIGER 350C140 Manual de usuario

Olli

Olli Lister WZG 180B Manual de usuario

Wisniowski

Wisniowski MakroPro 100 Manual de usuario

Zippity

Zippity WASHINGTON Manual de usuario

Roger Technology

Roger Technology LT338 Manual de usuario

CAI

CAI SG-60-PCY Manual de usuario

Hahn

Hahn hanit Instrucciones de funcionamiento

Oxgard

Oxgard K-14 Manual de usuario

patura

patura P4500 Manual de usuario

Betafence

Betafence HoriZen Prime Manual de usuario

VIEWRAIL

VIEWRAIL Vedera Manual de usuario

Alvarado

Alvarado CSG Manual de usuario

RTL

RTL INSTABOOM LITE Manual de usuario

IKC

IKC HW00571 Manual de usuario