WAGO 750-462 Series Manual de usuario

Fieldbus Independent

I/O Modules

2 AI Thermocouple

750-462 (/xxx-xxx)

Manual

Version 1.0.3

ii • General

WAGO-I/O-SYSTEM 750

I/O Modules

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax: +49 (0) 571/8 87 – 1 69

E-Mail: [email protected]

Web: http://www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 5 55

Fax: +49 (0) 571/8 87 – 85 55

E-Mail: [email protected]

Every conceivable measure has been taken to ensure the correctness and com-

pleteness of this documentation. However, as errors can never be fully ex-

cluded, we would appreciate any information or ideas at any time.

E-Mail: [email protected]

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally trademark or patent protected.

Content • iii

WAGO-I/O-SYSTEM 750

I/O Modules

Content

1Important Comments ................................................................................. 4

1.1 Legal Principles........................................................................................4

1.1.1 Copyright ............................................................................................. 4

1.1.2 Personnel Qualification ....................................................................... 4

1.1.3 Intended Use ........................................................................................ 4

1.2 Symbols .................................................................................................... 5

1.3 Number Notation...................................................................................... 5

1.4 Safety Notes ............................................................................................. 6

1.5 Scope ........................................................................................................ 6

2I/O Modules ................................................................................................. 7

2.1 Analog Input Modules.............................................................................. 7

2.1.1 750-462 (/xxx-xxx) [2 AI Thermocouple]........................................... 7

2.1.1.1 View................................................................................................ 7

2.1.1.2 Variations........................................................................................ 8

2.1.1.3 Description...................................................................................... 9

2.1.1.4 Display Elements .......................................................................... 10

2.1.1.5 Schematic Diagram....................................................................... 10

2.1.1.6 Technical Data .............................................................................. 11

2.1.1.7 Process Image ...............................................................................12

2.1.1.7.1 I/O Modules for Thermocouples.............................................. 12

2.1.1.7.1.1 Standard Data Format.......................................................... 13

2.1.1.7.2 I/O Modules for Voltage Measuring (mV) .............................. 17

2.1.1.8 Examples of Connection ............................................................... 18

4 • Important Comments

Legal Principles

WAGO-I/O-SYSTEM 750

I/O Modules

1 Important Comments

To ensure fast installation and start-up of the units described in this manual,

we strongly recommend that the following information and explanations are

carefully read and abided by.

1.1 Legal Principles

1.1.1 Copyright

This manual is copyrighted, together with all figures and illustrations

contained therein. Any use of this manual which infringes the copyright

provisions stipulated herein, is not permitted. Reproduction, translation and

electronic and photo-technical archiving and amendments require the written

consent of WAGO Kontakttechnik GmbH & Co. KG. Non-observance will

entail the right of claims for damages.

WAGO Kontakttechnik GmbH & Co. KG reserves the right to perform

modifications allowed by technical progress. In case of grant of a patent or

legal protection of utility patents all rights are reserved by WAGO

Kontakttechnik GmbH & Co. KG. Products of other manufacturers are always

named without referring to patent rights. The existence of such rights can

therefore not be ruled out.

1.1.2 Personnel Qualification

The use of the product detailed in this manual is exclusively geared to

specialists having qualifications in PLC programming, electrical specialists or

persons instructed by electrical specialists who are also familiar with the valid

standards. WAGO Kontakttechnik GmbH & Co. KG declines all liability

resulting from improper action and damage to WAGO products and third party

products due to non-observance of the information contained in this manual.

1.1.3 Intended Use

For each individual application, the components supplied are to work with a

dedicated hardware and software configuration. Modifications are only

permitted within the framework of the possibilities documented in the

manuals. All other changes to the hardware and/or software and the non-

conforming use of the components entail the exclusion of liability on part of

WAGO Kontakttechnik GmbH & Co. KG.

Please direct any requirements pertaining to a modified and/or new hardware

or software configuration directly to WAGO Kontakttechnik GmbH & Co.

KG.

Important Comments • 5

Symbols

WAGO-I/O-SYSTEM 750

I/O Modules

1.2 Symbols

Danger

Always abide by this information to protect persons from injury.

Warning

Always abide by this information to prevent damage to the device.

Attention

Marginal conditions must always be observed to ensure smooth operation.

ESD (Electrostatic Discharge)

Warning of damage to the components by electrostatic discharge. Observe

the precautionary measure for handling components at risk.

Note

Routines or advice for efficient use of the device and software optimization.

More information

References on additional literature, manuals, data sheets and INTERNET

pages

1.3 Number Notation

Number Code Example Note

Decimal 100 normal notation

Hexadecimal 0x64 C notation

Binary '100'

'0110.0100'

Within ',

Nibble separated with dots

6 • Important Comments

Safety Notes

WAGO-I/O-SYSTEM 750

I/O Modules

1.4 Safety Notes

Warning

Switch off the system prior to working on bus modules!

In the event of deformed contacts, the module in question is to be replaced, as

its functionality can no longer be ensured on a long-term basis.

The components are not resistant against materials having seeping and

insulating properties. Belonging to this group of materials is: e.g. aerosols,

silicones, triglycerides (found in some hand creams).

If it cannot be ruled out that these materials appear in the component

environment, then additional measures are to be taken:

- installation of the components into an appropriate enclosure

- handling of the components only with clean tools and materials.

Attention

Cleaning of soiled contacts may only be done with ethyl alcohol and leather

cloths. Thereby, the ESD information is to be regarded.

Do not use any contact spray. The spray may impair the functioning of the

contact area.

The WAGO-I/O-SYSTEM 750 and its components are an open system. It

must only be assembled in housings, cabinets or in electrical operation

rooms. Access must only be given via a key or tool to authorized qualified

personnel.

The relevant valid and applicable standards and guidelines concerning the

installation of switch boxes are to be observed.

ESD (Electrostatic Discharge)

The modules are equipped with electronic components that may be destroyed

by electrostatic discharge. When handling the modules, ensure that the

environment (persons, workplace and packing) is well grounded. Avoid

touching conductive components, e.g. gold contacts.

1.5 Scope

This manual describes the Analog Input Module 750-462 (/xxx-xxx)

2 AI Thermocouple of the modular WAGO-I/O-SYSTEM 750.

Handling, assembly and start-up are described in the manual of the Fieldbus

Coupler. Therefore this documentation is valid only in the connection with the

appropriate manual.

750-462 (/xxx-xxx) [2 AI Thermocouple] • 7

View

WAGO-I/O-SYSTEM 750

I/O Modules

2 I/O Modules

2.1 Analog Input Modules

2.1.1 750-462 (/xxx-xxx) [2 AI Thermocouple]

2-Channel Analog Input Module for Thermocouples

2.1.1.1 View

+TC +TC

13 14

-TC -TC

750-462

+TC 2

Data contacts

Function AI 2

-TC 2

Common

(ground)

Function AI 1

+TC 1

Error AI 2

Error AI 1

-TC 1

Common

(ground)

Shield

(screen)

Shield

(screen)

Fig. 2.1.1-1: 2- Channel Analog Input Module 750-462 g046200e

8 • 750-462 (/xxx-xxx) [2 AI Thermocouple]

Variations

WAGO-I/O-SYSTEM 750

I/O Modules

2.1.1.2 Variations

Item-No. Designation Description

Thermocouples

750-462 2 AI Thermocouple/K/

-100 °C ... +1370 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type K, Diagn.

Measuring range: -100 °C ... +1370 °C

750-462/000-001 2 AI Thermocouple/S/

-50 °C ... +1700 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type S, Diagn.

Measuring range: -50 °C ... +1700 °C

750-462/000-002 2 AI Thermocouple/T/

-100 °C ... +400 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type T, Diagn.

Measuring range: -100 °C ... +400 °C

750-462/000-006 2 AI Thermocouple/J/

-100 °C ... +1200 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type J, Diagn.

Measuring range: -100 °C ... +1200 °C

750-462/000-007 2 AI Thermocouple/B/

600 °C ... +1800 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type B, Diagn.

Measuring range: 600 °C ... +1800 °C

750-462/000-008 2 AI Thermocouple/E/

-100 °C ... +1000 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type E, Diagn.

Measuring range: -100 °C ... +1000 °C

750-462/000-009 2 AI Thermocouple/N/

-100 °C ... +1300 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type N, Diagn.

Measuring range: -100 °C ... +1300 °C

750-462/000-010 2 AI Thermocouple/R/

0 °C ... +1700 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type R, Diagn.

Measuring range: 0 °C ... +1700 °C

750-462/000-011 2 AI Thermocouple/U/

-25 °C ... +600 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type U, Diagn.

Measuring range: -25 °C ... +600 °C

750-462/000-050 2 AI Thermocouple/K/

-100 °C ... +1370 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type K, Diagn.

Measuring range: -100 °C ... +1370 °C

Without cold junction compensation

750-462/000-061 2 AI Thermocouple/U/

-25 °C ... +600 °C/

Diagn.

2-Channel Analog Input Module,

Thermocouple Type U, Diagn.

Measuring range: -25 °C ... +600 °C

Without cold junction compensation

Voltage measuring

750-462/000-003 2 AI Voltage measuring

±120 mV/ Diagn.

2-Channel Analog Input Module,

Voltage measuring, Diagn.

Measuring range: ±120 mV

750-462 (/xxx-xxx) [2 AI Thermocouple] • 9

Description

WAGO-I/O-SYSTEM 750

I/O Modules

2.1.1.3 Description

The 750-462 analog input module and its 750-462/xxx-xxx variations allow

thermocouples to be measured in the field. It can also be used to measure

voltages (mV).

Depending on the operating mode, the voltage value is converted to a

temperature or directly send out by the module. A microprocessor within the

module is used for converting and linearizing the measured voltage value into

a numeric value proportional to the temperature of the selected thermocouple.

The operating mode of the 750-462 basic module described in this manual is

for a type K thermocouple.

The analog module has two input channels allowing the direct connection of

two thermocouples. For example, two thermocouples can be connected either

to +TC1 and -TC1 or to +TC2 and -TC2.

The shield (screen) is directly connected to the DIN rail. A capacitive

connection is made automatically when snapped onto the DIN rail.

An optocoupler is used for electrical isolation between the bus and the field

side.

The operational readiness and trouble-free internal data bus communication of

the channels are indicated via a green function LED. Overrange or underflow

of the measuring range is indicated via a red error LED.

Any configuration of the input modules is possible when designing the

fieldbus node. Grouping of module types is not necessary.

Attention

This module has no power contacts. For field supply to downstream I/O

modules, a supply module will be needed.

The analog input module 750-462 and its variations can be used with all

couplers/controllers of the WAGO-I/O-SYSTEM 750 (except for the economy

types 750-320, -323, -324 and -327).

10 • 750-462 (/xxx-xxx) [2 AI Thermocouple]

Display Elements

WAGO-I/O-SYSTEM 750

I/O Modules

2.1.1.4 Display Elements

LED Channel State Function

off No operational readiness or the internal data bus

communication is interrupted

green

on Operational readiness and trouble-free internal data

bus communication

off Normal operation

750-462,

750-462/000-001,

-002, -006, -007,

-008, -009 ,-010,

-011, -050 ,-061,

Overrange/underflow of the

admissible measuring range

red

750-462/000-003 -

off No operational readiness or the internal data bus

communication is interrupted

green

on Operational readiness and trouble-free internal data

bus communication

off Normal operation

750-462,

750-462/000-001,

-002, -006, -007,

-008, -009 ,-010,

-011, -050 ,-061,

Overrange/underflow of the

admissible measuring range

13 14

Fig. 2.1.1-2:

Display elements

g045202x

red

750-462/000-003 -

2.1.1.5 Schematic Diagram

Shield

(screen)

+TC1 +TC2

-TC1

+TC

270pF

-TC2 -TC

20nF

270pF

DLogicMUX

Comp

Common

(ground)

Function

Error

Shield

(screen)

Common

(ground)

750-462

Fig. 2.1.1-3: 2-Channel Analog Input Module 750-462 g046201e

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de E/S de WAGO

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario

WAGO

WAGO 750-492 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario

WAGO

WAGO WAGO-I/O-IPC-C6 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario

WAGO

WAGO 750-8207 Manual de usuario

WAGO

WAGO WAGO-I/O-SYSTEM750 Manual de usuario

WAGO

WAGO I/O SYSTEM 750 Manual de usuario

WAGO

WAGO 750-626 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de lista de piezas

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario

WAGO

WAGO 750-630 Manual de usuario

WAGO

WAGO 750-455 Manual de usuario

WAGO

WAGO 750-650 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario

WAGO

WAGO WAGO-I/O-SYSTEM 750 XTR Series Manual de usuario

WAGO

WAGO I/O-SYSTEM 750-517 Manual de usuario

WAGO

WAGO 765-1205/100-000 Manual de usuario

WAGO

WAGO I/O System 750 Series Manual de usuario

WAGO

WAGO WAGO-I/O-SYSTEM 750 Series Manual de usuario

WAGO

WAGO 750-560 Manual de usuario

WAGO

WAGO I/O-SYSTEM 750 Manual de usuario

WAGO

WAGO 750-496 Manual de usuario

WAGO

WAGO 750-433 Manual de usuario

Manuales populares de Sistema de E/S de otras marcas

Teknim

Teknim TWM-1887 Manual de instrucciones

Intelligent Appliance

Intelligent Appliance IA-2662-E Manual de usuario

BERGHOF

BERGHOF ECC DIO 16/16 Manual de instrucciones

Advantech

Advantech PCM-27J3AU Manual de instalación y operación

Festo

Festo CP-E08-M12-CL Manual de usuario

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manual de usuario

Hitachi

Hitachi HX-RIO3 Series Manual de usuario

NUUO

NUUO SCB-A08 Manual de usuario

M-system

M-system R3Y-RS8 Manual de usuario

jablotron

jablotron JB-110N Manual de usuario

Omron

Omron SYSMAC C200H Manual de usuario

DOLD

DOLD SAFEMASTER M Manual de usuario

ABB

ABB OPT-MF-001 Manual de usuario

Omron

Omron SYSMAC C2000H Manual de usuario

Helmholz

Helmholz TB20 Manual de usuario

ICP DAS USA

ICP DAS USA tM-AD2 Manual de usuario

Automationdirect.com

Automationdirect.com DL305 Manual de usuario

Contec

Contec PIO-16L(PCI)H Manual de usuario