WAGNER TR-2470 Manual de usuario
2.4GHz Wireless,
Audio/Video/S-Video Sender
With Built-in Remote Control Extender
MODEL TR-2470
OWNERS MANUAL
Made in China
TABLE OF CONTENTS
●
About the TR-2470 ...…....…...................……....…….......………......1
●
Location of controls and accessories .……..…….……..………........2
●
User Guide ...…............................……...….…………...........3
●
Installation …........................….……….………..…...………..4
●
Trouble Shooting ...…....................….……….……….…….……5-6
●
Referring Pictures ..................…………….......……….….....….....7-9
●
Further applications .....................……….......………..…........... 10-12
●
Caution ....................….……………...…………………...13
●
Specification ....................….………………..……….…………14
ABOUT THE TR-2470
The TR-2470 is a powerful wireless A/V/S-Video signal sender and receiver system which
can operate with satellite and cable receivers, camcorders, stereo systems,
televisions , laser disc players and VCRs,
and provide superior reception at distances
of up to 250 feet (clear line of sight) from the transmitter.. And this system can support
S-Video
This system can be used in many different ways
● Enables you to watch a movie on any television in your home without moving your
VCR or Laser Disc Player, and without the hassle of running wires.
● Enables you to watch your favourite cable or satellite programs
on any television in
your home.
● Extends the listening enjoyment of your stereo receiver to any powered speakers
in your home, even if they are not wired into your stereo system.
● Enables you to use your camcorder with a remote television as a closed circuit
monitoring system; ideal for baby's room, or for security.
1
LOCATION OF CONTROLS
The TR-2470 has been carefully engineered and manufactured to give you dependable
operation. Read this manual before operating this unit to become familiar with its features
and obtain the performance that will bring you enjoyment for many years.
Please retain this manual for future reference.
Transmitter and Transmitter and Transmitter Back
Receiver Side
Receiver Front
Receiver Back
●
Transmitter and Receiver
1. Channel Selector
2. 2.4 GHz Antenna
3. ON / OFF Switch
4. AC Adaptor Port
●
Transmitter
5. Infrared Remote Output
6. Audio L
7. Audio R
8. Video
9. S-Video
2
●
Receiver
10. Audio L
11. Audio R
12. Video
13. S-Video
●
Accessory
1. DC 12V 300mA, AC 110V or 230V Adaptor x 1
(For Transmitter)
2. DC 12V 300mA, AC 110V or 230V Adaptor x 1
(For Receiver)
3. In rared Extender Mouse x 1
4.
A/V Cable x1
Remote
Control
Indicators
DC 12 V
AC
120V 300mA
Infrared
Extender
USER UIDE
1. Make sure your input AC voltage conforms to the adaptor specifications.
( Tolerance never more than 5%, such as 120 VAC +/- 10 VAC )
2. Only use the power adapter provided with the TR-2470. If you use your own
adaptor, make sure the power output is 12V DC, 300 mA centre positive.
3. With direct line-of-sight, the maximum range of A/V signal transmission can reach up
to about 250 feet, and this distance would be shortened by obstacles or walls
placed between transmitter and receiver. (The optimum indoor range is under 25 M)
4. To ensure good infrared remote control operation aim your remote control at the I/R
Sensor Window on the TR 2470 and press the buttons firmly. ( With some remote controls
it may be necessary to press and hold each button for about a second). The working angle
of the I/R Sensor Window is +/- 15 degrees. (see Pictures 7,8,)
5. The remote controller has to be used within the distance of ( from remote control
to receiver )not less than 0.3M and no more than 4.5M (working angle +/- 15 degrees).
(see Pictures 9)
6. Be sure the ON / OFF switch on both the transmitter and receiver is in the OFF
position before making any connections.
3
INSTALLATION
TRANSMITTER (Tx-2470)
a. By Composite Video(RCA)
1. Take a RCA to RCA cable(included),take one end connected to the AV In socket of
Tx-2470.(see Pictures 1 )
2. Connect the other end to the Audio / Video Out port of VCR, DVD, VCD,
Satellite receiver .Etc. (see Pictures 1)
b. by S-Video
1. Take a RCA to RCA cable(included),take Audio RL connected to the Audio RL In
socket of Tx-2470. Take a S-Video to S-Video cable connect one end to S-Video input
socket of Tx-2470. (see Pictures 1 )
2.connect the other end of Audio RL to the Audio RL Output Port of VCR, DVD, VCD,
Satellite receiver .Etc. and also connect other end of S-video to S-Video Output of of
VCR, DVD, VCD, Satellite receiver .Etc. (see Pictures 1 )
3. Connect the power adaptor to the power outlet. Turn power ON.
** DC 12V 300mA, AC 120V Adaptor. (see Pictures 1 )
4. Stick the IR mouse in front of the sensor receiving window
of the device i.e. VCR, DVD, VCD,.. Satellite receiver . Etc. under effective range
and working angles. (see Pictures 2 )
5. Choose one of the 4 channels by sliding the selection button ( must be set to
same Channel on both transmitter & receiver) (see Pictures 4 )
RECEIVER (Rx-2470)
a. by Composite Video (RCA)
1. Take a suitable RCA to RCA(included) cable and connect one end to A/V socket of
Rx-2470.(see Pictures 3 )
2. Connect the other end to the Audio / Video In port of TV. (see Pictures 3 )
b. by S-Video
1. Take a RCA to RCA cable(included),take Audio RL connected to the Audio RL In
socket of Rx-2470. Take a S-Video to S-Video cable connect one end to S-Video input
socket of Rx-2470. (see Pictures 3 )
2. Connect the other end of Audio RL to the Audio RL Input Port of Television and also
connect other end of S-video to S-Video Input Port of Television (see Pictures 3 )
3. Connect the power adaptor to the power outlet. Turn power ON.
**DC 12V 300mA, AC 120V Adaptor (see Pictures 3 )
4. Choose one of the 4 channels by sliding the selection button ( must be set to
same Channel on both transmitter & receiver) (see Pictures 4 )
5. Please make sure this unit is set a little forward to the top of TV in order to have the
best IR performance. (see Pictures 7 )
4
TROUBLE SHOOTIN
No picture or sound
a) Check the power on/off switches on the Transmitter, Receiver and TV
b) Make sure the power plug and signal cable are pushed all the way in.
c) Check if the channel of transmitter & receiver are set to the same channel.
d) Make sure that all cables are connected as per the user guide
e) Check if there is any discontinuity inside the cable.
f) If you use S-Video Connection, your TV set must be set to “S-Video” mode
Interference & noise
a) Adjust receiver antenna direction for optimal performance. (see Pictures 5, 6)
b) Adjust transmitter antenna direction for optimal performance. (see Pictures 5, 6 )
c) Check if the supplied voltage matches the adapter specification
(The power output has to be 12 VDC, 300mA centre positive)
d) Select a different microwave channel by sliding the channel button on both
transmitter and receiver. (see Pictures 4 )
e) You can also vary the transmit / receiver position for optimal performance.
f) If the distance between receiver and transmitter is less than 10 M do not open
the round antenna as the signal could be too strong to obtain a sharp picture.
g) If using a microwave oven, turn it off.
h) Remove microwave oven or clear unnecessary obstructions from the path
between transmitter and receiver.
5
1. Not Synchronised
2. Screen unlocked
3. Noisy line across the screen
a) Adjust receiver antenna direction for optimal performance.
(see Pictures 5, 6)
b) Adjust transmitter antenna direction for optimal performance.
(see Pictures 5, 6 )
c) Check if the supplied voltage matches the adapter specification.
d) Select a different microwave channel by sliding the channel button on both transmitter
and receiver. (see Pictures 4 )
e) If using a microwave oven, turn it off.
f) Remove microwave oven or clear unnecessary obstructions from the path
between transmitter and receiver.
g) Move transmitter and receiver closer. If the problems remain, please contact
your vender for help.
Remote control extender does not work
1) To ensure good infrared remote control operation aim your remote control at the I/R
Sensor Window on the TR 2470 and press the buttons firmly. ( With some remote
controls it may be necessary to press and hold each button for about a second). The
working angle of the I/R Sensor Window is +/- 15 degrees. (see Pictures 7,8,9)
2) Check the path between the transmitter & receiver and clear unnecessary
obstructions.
4) Make sure the IR extender mouse is pointing toward the sensor precisely.
5) Check if the batteries on remote control are full of energy. Replace with new
batteries if necessary .
6) The optimum indoor operating range is about within 15 M.
6
Transmitter
Pictures 1
Pictures 2
Receiver
Pictures 3
7
Back View
Back View
ON/OFF Switch
Power Adaptor
Satellite.R
VCR
DVD
VCD
Back View of Video
devices
Make sure you stick the mouse in front of the Infrared Receiving Sensor
(Approx. within 50 cm, +/-15 degrees)
IR OUT
Cable, Satellite.R/DVD/VCR/VCD
Front View
Back View
A/V IN
Back View
TV
ON/OFF Switch
Power Adaptor
ON/OFF Switch
Power Adaptor
S-Video IN
A/V IN
S-Video IN
S-VIDEO CABLE
RCA CABLE
S-VIDEO CABLE
RCA CABLE
Pictures 4
Pictures 5
Pictures 6
8
Transmitter Receiver
Channel selection button
(must be set to same channel
on both transmitter & receiver)
Transmitter Receiver
Side with dimples
Turn the side with dimples
face to face toobtain the
best performance
Receiver
Transmitter
Turn the side with dimples face to
face toobtain the best performance
Pictures 7
OPERATIN REMOTE CONTROL
Pictures 8
Receiver
Pictures 9
9
Remote Control
Distance Not less than 0.3M and no more than 4.5M
In order to obtain the best
performance of IR receiving
please be sure this unit is
a little forward to the TV
IR Receiver
TV
Side View
IR sensor
window
4.2M
4.5M
0.3M
Receiver
Receiver
Tabla de contenidos
