The appliance can be switched on and off by pressing the “ON/OFF” button
Press the sleep mode button on the remote control
The display reads “L” and the air speed is minimised
Press the button again to exit the sleep mode
(You can also exit the current mode by pressing the “air speed +” button)
Press the turbo mode button on the remote control
The display reads “H” and the air speed is maximised
Press the button again to exit the turbo mode
(You can also exit the current mode by pressing the “air speed +” button)
Press the oscillation button to activate the oscillation mode
The fan can swivel to the left and right by 80°
Press the button again to stop the oscillation mode
Press this button to turn on the germicidal UV lamp
The display reads “U”
The UV lamp will be turned off after one hour of operation
Press the button again to turn off the germicidal UV lamp
In cooling mode, the LED lights up blue
Press this button to activate the cooling mode
Note: The cooling mode is the appliance’s default mode
To increase or decrease the air speed, press the “+” or “-” button on the left
side of the remote control
The cooling mode offers 9 different speed options.
The heating mode offers 4 different speed settings
In heat mode, the numbers are displayed in red
Press this button to activate the heating mode
Note: In heating mode, there are no turbo or sleep features available
Press the temperature button on the right side of the remote control to set the
temperature when the appliance is in heating mode (1-30°C)
Note: This button does not work in cooling mode.
Press the timer button on the remote control to set the timer between 1 and 8
hours.
