VStarcam C24S Manual de usuario
1.Q&A
Q：How to reset camera back to factory default setting?
A：Hold the reset button for about 10 seconds to reset camera.
Camera default password: 888888 (Strong recommend to
revise your camera password).
Q : Any WiFi connection tips?
A : camera can only support 2.4G frequency signal，and
802.11b/g/n WiFi network.
1)The connected WiFi password should be less than 16 digitals,
and can not contain @ ￥！ ect special digitals, suggest to
revise the password to only contain letters and number.
2)Please upgrade to the latest version APP.
Q : No vision at night time ？
A : ① Check the IR function is enabled or not;
② Check the IR LED is on or not;
③ Reset camera back to factory setting;
④ Try to upgrade the camera to the latest rmware.
Q：What to do if camera picture is blurred?
A：① Enter video interface, adjust the picture quality to the HD
mode;
② Clean the camera lens with a cotton swab.
2. Software download
① Visit www.eye4.so to download
② Search Eye4 in App Store, Android market ect
③ Scan below QR code to download.
3. Register
① Android/iOS client click “Sign up now”, input
user name and password to nish registration.
② Also support the third party account login.
4. Add device
4.1 Installation method one:
Please connect the camera with power and network
cable, choose search in LAN or manually add the
camera.
① Please check camera network cable should be
connected with the router LAN, and confirm the
yellow indicator is ashing.
Please make sure the phone and camera are
under same router.
② Enter APP ,click the top right corner“ ”
Choose IP camera
Search camera in LAN：
can find all the available camera in the same router
as the smartphone. If added success, other account
users want to add the camera, can also use this search
function to add.（Note：Eye4 account already added
camera will unable to nd）.
③ Wait about 15s will pop up the add button, if still
no camera nd, please try again, or return to previous
steps, choose manually add camera.
Manually add a camera：
input camera UID, or scan the camera bottom sticker
QR code to add.
Note：If need to setup WiFi connection,
please follow below instruction:
④ Click the top right corner “ ” choose
setting wireless configuration”, input WiFi
password same as the smartphone/tablet connected
WiFi.
⑤ Wait until camera speaks” please remove the
network cable, camera will restart….”, remove
the network cable ( no need to remove the power
connection).
Unplug the network cable,camera will
reboot automatically...
Note：If setting fail, please still use network
cable connection or change the router to setup
again.
Tabla de contenidos
Otros manuales de Cámara de seguridad de VStarcam
VStarcam
VStarcam C38S-P Manual de usuario
VStarcam
VStarcam C7837WIP Manual de usuario
VStarcam
VStarcam CB72 Manual de usuario
VStarcam
VStarcam C Series Manual de usuario
VStarcam
VStarcam C18S Manual de usuario
VStarcam
VStarcam FC2 Manual de usuario
VStarcam
VStarcam C38S Manual de usuario
VStarcam
VStarcam WM2 Manual de usuario
VStarcam
VStarcam Pangolin Series Manual de usuario
VStarcam
VStarcam Pangolin T series Manual de usuario
