Vivo STAND-V101L Manual de usuario

Pneumatic Arm Single Laptop Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v101l

SKU: STAND-V101L

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

A (x1)

Arm

B(x1)

Clamp

C(x1)

Clamp Cover

J (x1)

Grommet Base

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

D(x1)

VESA Plate

E(x1)

Pole

F (x1)

Cable Clip

G(x1)

Thumbscrew

H (x3)

Bolt

I (x1)

Support Plate

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

K (x1)

4mm Allen

Wrench

L (x1)

6mm Allen

Wrench

M-A (x4)

M4x12

M-B (x4)

M4x16

M-C (x4)

M5x12

M-D (x4)

M5x16

M-E (x4)

D5 Washer

M-F (x4)

Spacer

O (x2)

Cover

M (x1)

Bolt

N (x2)

Arm

P (x4)

Bolt

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

9.9lbs

(4.5kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Phillips

Screwdriver

OPTION A: Clamp Installation

Adjust clamp (B) height according to thickness of desktop. Attach clamp cover (C) to clamp (B).

Secure pole (E) to clamp (B) using three bolts (H). Tighten using 4mm Allen wrench (K).

OPTION B: Grommet Base Installation

For grommet hole attachment, disassemble clamp (B) using 6mm Allen wrench (L) and a Phillips

screwdriver. Attach base (J) and pole (E) to 3/8” (10mm) grommet hole in desktop using bolt from

clamp (B) with plate (I).

2.2-17.6lbs

(1-8kg)

LAPTOP MONITOR

STEP 2

Slide cable management clip (F) over top of pole (E). Slide monitor arm (A) over pole and tighten bolt

using 6mm Allen wrench (L).

OPTION A: Flat Back Monitor

Attach VESA plate (D) to the back of

the monitor using bolts (M-A, M-C) and

washers (M-E).

OPTION A: MONITOR STEP 3

OPTION B: Curved Back Monitor

Attach VESA plate (D) to the back of the monitor

using bolts (M-B, M-D), washers (M-E), and

spacers (M-F).

Slide VESA plate (D) with

monitor over bracket on arm

(A). Secure using the thumb

screw (G). Remove the

bottom cover from arm (A).

OPTION A: MONITOR STEP 4

OPTION A: MONITOR STEP 5

Organize cables and re-attach cover.

OPTION A: MONITOR STEP 6

Adjust gas spring support in arm using 6mm Allen

wrench (L). Turning counter-clockwise increases

support, and clockwise decreases. Adjust tilt support

using 6mm Allen wrench (L).

OPTION A: MONITOR STEP 7

Adjust monitor position as desired.

Place laptop arms (N) underneath each side

of laptop tray (M), aligning square holes in

arms with the edge and long slot on each

side. Insert clips (O) through top to secure

arms, making sure all 4 locks on each clip are

engaged with square holes in arms.

OPTION B: LAPTOP STEP 3

Attach assembled laptop holder to

75mm and 100mm holes on arm

(A) using M4x8 screws (P). Tighten

screws using a Phillips screwdriver.

OPTION B: LAPTOP STEP 4

Slide VESA plate (D) with laptop tray (M) over bracket

on arm (A). Secure using the thumb screw (G).

OPTION B: LAPTOP STEP 5

Release locks on the underside of laptop arms (N). Extend arms, place laptop in holder, then adjust

arms to fit the width of the laptop. Engage locks to secure laptop. If using a thicker laptop, turn front

bumpers to the upward position for additional support.

OPTION B: LAPTOP STEP 6

Remove the bottom cover from arm (A).

OPTION B: LAPTOP STEP 7

Organize cables and re-attach cover.

OPTION B: LAPTOP STEP 8

Adjust gas spring support in arm using 6mm Allen wrench (L). Turning

counter-clockwise increases support, and clockwise decreases.

Adjust tilt support using 6mm Allen wrench (L).

OPTION B: LAPTOP STEP 9

Adjust laptop position as desired.

OPTION B: LAPTOP STEP 10

LAST UPDATED: 12/04/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Tabla de contenidos

Otros manuales de Rack y soporte de Vivo

Vivo

Vivo MOUNT-E-MM070 Manual de usuario

Vivo

Vivo STAND-V001U Manual de usuario

Vivo

Vivo STAND-V038F Manual de usuario

Vivo

Vivo STAND-V004FG Manual de usuario

Vivo

Vivo PT-SD-AM02A/W Manual de usuario

Vivo

Vivo STAND-TV03E Manual de usuario

Vivo

Vivo DESK-V133E Manual de usuario

Vivo

Vivo STAND-HS02W Manual de usuario

Vivo

Vivo MOUNT-V002G Manual de usuario

Vivo

Vivo STAND-V004P Manual de usuario

Vivo

Vivo STAND-V200R Manual de usuario

Vivo

Vivo MOUNT-ASMX01 Manual de usuario

Vivo

Vivo STAND-TS38B-4 Manual de usuario

Vivo

Vivo STAND-V101F Manual de usuario

Vivo

Vivo MOUNT-VP02B Manual de usuario

Vivo

Vivo STAND-SIT1DD Manual de usuario

Vivo

Vivo DESK-V100EB Manual de usuario

Vivo

Vivo VESA MOUNT-AOC1A Manual de usuario

Vivo

Vivo STAND-SP03C Manual de usuario

Vivo

Vivo STAND-SK02 Manual de usuario

Vivo

Vivo STAND-V002 Manual de usuario

Vivo

Vivo MOUNT-KB05HW Manual de usuario

Vivo

Vivo STAND-SP02B Manual de usuario

Vivo

Vivo MOUNT-SP01CB/CW Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario