Vivo STAND-MIC02 Manual de usuario
Premium Microphone Boom Arm Desk Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-mic02
SKU: STAND-MIC02
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS TOOLS NEEDED
2.2lbs
(1kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Arm
B(x1)
Clamp
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-A (x1)
Grommet Bolt
S-B (x1)
Grommet Wing Nut
C (x1)
Grommet Plate
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
B
A
B
OPTION A: Clamp Installation
Install Clamp (B) to desktop. Insert post on Arm (A) into Clamp (B).
3
OPTION B: Grommet Installation
Disassemble the Clamp (B) using a Phillips Screwdriver. Slide Clamp Bracket (B2) out from Clamp
Base (B1). Then Remove the Clamp Plate (B3) from the Clamp Screw (B4).
STEP 1 (Continued)
Install Grommet Plate (C) into the Clamp Base (B1) as shown below. If your desktop does not already
have an existing grommet hole, use a 1/4” (6.5mm) drill bit to make one in the desired location. Then
install the Grommet Bolt (S-A) into the base assembly. Insert the Grommet Bolt (S-A) through the
hole on desktop, then install the Clamp Plate (B3) and then tighten the Grommet Wingnut (S-B).
Insert post on Arm (A) into Clamp Base (B1).
B
B2
B1
B3
S-A
C
B1
S-B
B3
A
STEP 2
To adjust the arm tension, tighten or loosen the adjustment screw located on the base of the Arm (A).
If your microphone uses 3/8” threading, remove the 5/8” to 3/8” threaded adatper. When using the
adapter, be sure to leave about 2mm gap between the lock knob and the base of the threading.
3/8”
5/8”
Tension
Adjustment
Screw
Lock
Knob
A
B1
B4
LAST UPDATED: 11/5/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
Otros manuales de Rack y soporte de Vivo
Vivo
Vivo MOUNT-PC01C Manual de usuario
Vivo
Vivo STAND-V002T Manual de usuario
Vivo
Vivo Sidekiix Manual de usuario
Vivo
Vivo MOUNT-V001G Manual de usuario
Vivo
Vivo STAND-V101G1U Manual de usuario
Vivo
Vivo STAND-V002 Manual de usuario
Vivo
Vivo STAND-SIT1B Manual de usuario
Vivo
Vivo DESK-V100EW Manual de usuario
Vivo
Vivo MOUNT-PLAY1W-1 Manual de usuario
Vivo
Vivo STAND-SIT1K Manual de usuario
Vivo
Vivo STAND-V011/W Manual de usuario
Vivo
Vivo STAND-V101G2 Manual de usuario
Vivo
Vivo MOUNT-KB03 Manual de usuario
Vivo
Vivo VESA MOUNT-AOC1A Manual de usuario
Vivo
Vivo CART-V03W Manual de usuario
Vivo
Vivo PP-1-T024D/G Manual de usuario
Vivo
Vivo CPU Holder Manual de usuario
Vivo
Vivo STAND-V001BL Manual de usuario
Vivo
Vivo STAND-V003D Manual de usuario
Vivo
Vivo STAND-V012C Manual de usuario
