Vivo MOUNT-V002W Manual de usuario
Pneumatic Arm Dual Monitor Wall Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-v002g
SKU: MOUNT-V002G,W
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
B(x3)
Cover
T-A (x1)
5mm Allen
Wrench
W-A (x3)
Wall Screw
M-A (x8)
M4x12mm
Screw
M-B (x8)
M5x12mm
Screw
M-C (x8)
M5 Washer
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
W-C (x3)
Washer
W-B (x3)
Anchor
Drill
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
A (x1)
Monitor Arm
4.4-19.8lbs
(2-9kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PER ARM
3
ASSEMBLY STEPS
STEP 1
OPTION A: Wood Wall
Use a pencil to mark drilling location for wood beam and drill 2.2” deep holes using 3/16”bit. Use of a
stud finder is recommended. Mount Arm (A) to wall using Wall Screws (W-A) and Washers (W-C). Do
NOT use Anchors (W-B) for wood beam installation.
OPTION B: Concrete/Brick Wall
For concrete or brick wall installation, use a pencil to mark drilling locations and drill 2/4” deep holes
using a 3/8” bit. Mount Arm (A) to wall using Wall Screws (W-A) , Anchors (W-B), Washers (W-C).
4
STEP 2
STEP 3
Press Covers (B) into screw holes.
Install Screws (M-A) or (M-B) with Washers (M-C) in top two holes of the monitor, leaving 3mm of
space between the screw heads and the monitor. Tighten using the 5mm Allen Wrench (T-A). Hang
monitor over top two slots of VESA plate, install two bottom screws, and then tighten top screws using
Allen Wrench (T-A).
T-A
T-A
T-A
5
STEP 4
Tighten the socket screw if the joints are making a popping sound. Adjust arm tension by turning
screw with 5mm Allen Wrench (T-A). Turn clockwise to reduce tension and turn counterclockwise to
increase tension. The tension should be just enough to hold your monitor In place without liing itself
up. If needed, adjust bolts on the sides of the hinge behind the VESA plate to tighten or loosen the tilt
angle. Tighten using 5mm Allen Wrench (T-A).
STEP 5
Remove cable cover by removing the screw underneath each one.
T-A
T-A
T-A
WARNING:
Monitor must be installed
on mount before making
tension adjustments to
the gas spring arm. Keep
monitor in a straight
orientation when making
adjustments.
T-A
6
STEP 6
Insert cables and replace covers while making sure the cables have enough slack to allow enough free
movement of the arm.
T-A
T-A
7
Adjust as Desired
LAST UPDATED: 12/22/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Rack y soporte de Vivo
Vivo
Vivo STAND-V001O Manual de usuario
Vivo
Vivo MOUNT-PLAY1W Manual de usuario
Vivo
Vivo STAND-V006 Manual de usuario
Vivo
Vivo MOUNT KB05D Manual de usuario
Vivo
Vivo STAND-V000DL Manual de usuario
Vivo
Vivo MOUNT-VP06B Manual de usuario
Vivo
Vivo STAND-V200G Manual de usuario
Vivo
Vivo STAND-V001L Manual de usuario
Vivo
Vivo DESK-V000A Manual de usuario
Vivo
Vivo STAND-V012L Manual de usuario
Vivo
Vivo MOUNT-ASVZ01 Manual de usuario
Vivo
Vivo STAND-V003D Manual de usuario
Vivo
Vivo STAND-HS04H Manual de usuario
Vivo
Vivo STAND-V000B Manual de usuario
Vivo
Vivo STAND-V101D Manual de usuario
Vivo
Vivo MOUNT-VW090F Manual de usuario
Vivo
Vivo STAND - TV02D Manual de usuario
Vivo
Vivo STAND-V002E Manual de usuario
Vivo
Vivo STAND-TS38B-4 Manual de usuario
Vivo
Vivo STAND-TV00H Manual de usuario
