Programming Programming
Set Time
Follow the steps below to set the day of the week and current time:
1. Press the MENU button.
2. Press Set Time.
3. Day of the week will be ashing. Use the or key to
select the current day of the week.
4. Press Next Step.
5. The current hour is ashing. Use the or key to
select the current hour. When using 12-hour time, make sure
the correct a.m. or p.m. choice is selected.
6. Press Next Step.
7. Minutes are now ashing. Use the or key to
select current minutes.
8. Press DONE when completed.
(If using programming) Set 7 Day Program Schedule
3. Press SET SCHEDULE. Note: Monday is displayed and the WAKE
icon is shown. You are now programming the WAKE time
period for that day.
4. Use the or key to make your time selection for that
day’s WAKE time period. Note: If you want the fan to run continu
ously during this time period, select ON with the FAN key.
5. Use the or key to make your setpoint selection for that
day’s WAKE period.
6. Press Next Step.
7. Repeat steps 4 through 6 for that day’s LEAVE time period,
RETURN time period, and SLEEP time period.
To customize your 7 day program schedule, follow these steps:
Weekday:
1. Select HEAT or COOL with the system switch.
Note: You have to program heat and cool each separately.
2. Press the MENU button.
You will see a TECHNICIAN SETUP option after the MENU key is
pressed. This TECHNICIAN SETUP key is for installer conguration
and should NOT be changed unless you consult your professional
heating and air conditioning technician.
Important:
To nish your 7 day Program Schedule, repeat
steps 4 through 6 for the Tuesday, Wednesday, Thursday,
Friday, Saturday and Sunday time periods.
