Vitek VTC-BHOCRAZ Manual de usuario

VITEK

FEATURES:

• 1/2.9” Sony® CMOS

• 2.1 MegaPixel With full 1080p/720p HD-SDI Output (SMPTE 292M)

• Up to 30fps live view@ 1920x1080 (1080p)

• MegaPixel IR Corrected 3-9mm (VTC-BHOCRAZ39) / 9-22mm (VTC-

BHOCRAZ922) Varifocal Lens

• Mechanical IR Cut Filter (True Day/Night)

• 16:9 Video format

• On-board Intelligence (OBI Technology) delivers Auto-Focus-Zoom by

tracking motion, then optically zooming into that area of the frame

• Fully programmable advanced WDR

• 40 850nm IR LEDs with up to 150’ IR range

• Integrated Cooling Fan

• Advanced OSD Functions: Motion Activated Pointing Zoom, Defog, Dynamic

IR, BLC/HLC, Motion Deblur, Pixel Defect Compensation, Title Set, Mirror,

Flip

• 100% Pure Digital Transmission of video data

• Up to 700’ HD Transmission Range (Depending on cable characteristics and

integrity)

• Heavy Duty IP68 rated weather/vandal resistant

aluminum construction

• 12VDC / 24VAC Dual Voltage Operation

VTC-BHOCRAZ

2.1MP HD-SDI Vandal Resistant

AFZ/WDR IR Bullet Camera

Safety Precaution

Warning :

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment . This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Caution :

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user’s authority

to operate the equipment.

The symbol is intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in the literature

accompanying the unit.

The symbol is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons .

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

To prevent electrical shock and/or ﬁre hazard, use only speciﬁed power

source.

Main power quality should be that of a typical commercial environment. If the user

of the model requires continued operation during power interruptions, it is

recommended that the model be powered from an uninterruptible power supply

(UPS) or a battery.

Safety Precaution

NOTICE

The image used in this instruction manual are processed to help comprehension

and may differ from actual video of the camera.

The warranty becomes void if repairs are undertaken by unauthorized persons.

Maintenance and repair have to be carried out only by authorized service centers.

Use only a mild detergent to clean the housing.

The camera should never be operated beyond the technical specifications.

The camera should never be operated in water.

Avoid installing in areas where shock or vibration may occur.

Pay attention to safety when installing the connection cable and observe that the

cable is not subjected to heavy loads, kinks or damage and no moisture can get in.

This can lead to damage to the camera and void the warranty.

Never open the device no user serviceable parts

Contents

Safety Precaution

Contents

Features

Dimensions

Part Names

Installation Instructions

Operating Instructions

Specifications

p. 02 - 03

p. 04

p. 05 - 06

p. 06

p. 07

p. 08

p. 09 - 11

p. 12 - 25

p. 26

Optional Dome Mounts

Package Includes

p. 29

Warranty

Key Features

Features

• Full HD, 2Mega Pixel HD-SDI CAMERA, 1920x1080(30p/25p)

• True WDR(Wide Dynamic Range)

• Improved Noise reduction with the enhanced 3D-NR

• VTC-BHOCRAZ39: f=3~9mm, F1.2~F2.1 Day&Night zoom lens

(Optical 3x Auto focus zoom / Digital 32x zoom)

• VTC-BHOCRAZ922: f=9~22mm, F1.6~F2.3 Day&Night zoom lens

(Optical 2.4x Auto focus zoom / Digital 32x zoom)

• Focusig Status Indicator on Screen

- ★(Blue) Focusing in process

-★(White) Focusing Completed

• Dual Filter Switching

• Pointing Zoom which enables the exible zooming at any area.

• Smart Motion Zoom in combining with Pointing Zoom.

• Selectable Scale down image to 720p mode

• Motion Detection, Privacy Mask, Defog, Sens-up(x32), BLC/HLC,

H/V/HV Flip, D-Zoom(1.1x~8x), LSC(Lens Shade Compensation),

Motion Deblur, Pixel Defect Compensation

• ID / TITLE / ZOOM RATIO DISPLAY

• Enhanced light Sensitivity by DSS technology

• Top performance at low light sensitivity (Sens-up On)

• OSD menu & Video sub-out for easy installation & maintenance.

• Circuit protection against faulty connection in power polarity

• Isolated power supply against ground loop problem

• Remote control via RS-485 (Pelco-D/P)

• Built-in 40 LEDs

• One-touch 3-Axis locking bracket, Easy installation Pad

• Built-in cooling Fan & Heating function

• IP68 protection

This camera realizes the natural and crisp image as you see the scene in front

of you by adopting Auto Focus Full HD(1920x1080p) camera module.

Features

General Description

Package Includes

VTC-BHOCRAZ Camera General Operation

Instructions

Complete Installation and

Operation Instructions on CD

• With ICR mechanism

- Enhances its sensitivity about 10x at night time

- Can accept infrared light

• 24VAC/12VDC dual power

- Offers the exibility of installation

- Ensures the reliability

Mounting Template

Torque Wrench:

3mm (1pc)

Video Sub-out

Cable (1pc)

Assembly Screw:

4 x 14mm (4pcs)

Mounting Screw:

4 x 30mm (4pcs)

Plastic Anchor:

6 x 30mm (4pcs)

Easy

Bracket

(unit: inches)

Dimensions

3.15

3.31

3.53

4.35

3.39

10.11

3.94

4.37

Part Names

CAUTION

Torque

wrench

Lock/Unlock

Screw

• Adjustment of viewing angle

with one-touch 3-Axis bracket

• Extreme care should be taken NOT to scratch the

window in front of lens while installing or adjusting

the camera.

• Care should be taken the cable is NOT damaged,

kinked or exposed in a hazardous area.

• Do not expose the camera lens directly to a strong

light source such as the sun or a spot light.

DUAL WINDOW

SUNSHIELD BOLT

SUNSHIELD

FRONT CASE

OSD Setup

CONTROL COVER

BRACKET

REAR CASE

POWER AND VIDEO CABLE

Installation Instructions

1. Locate the mounting template at the installation position and drill the ceiling

or wall if needed. (*The easy bracket can not be installed on the ceiling)

2. Place the easy bracket on pre-drilled position and attach using mounting

screws(4x30mm). Skip this step when an easy bracket is not installed.

3. Route the power cable to the connecting place.

Hook up the camera bracket with the easy bracket as illustrated below.

4. Attach the camera bracket using the assembly screws (4x14mm).

5. Set the camera’s viewing angle.

6. Attach the sunshield to the camera unit and tighten the sunshield-bolt.

Mounting Screw

: 4x30mm

Plastic Anchor

: 6x30mm

Torque Wrench

REAR VIEW

Cable exit

Assembly Screw

: 4x14mm

Limit of pan & tilt

Installation Instructions

90¡ 90¡

80¡

90¡

–90¡

• Unlock the screw on the camera bracket using the torque wrench supplied

• Set the camera’s viewing angle then lock the screw on the bracket.

1) Pan limit:

Pan is limited to +/- 90°.

2) Tilt limit:

Tilt is limited to 0°(2°) min ~ 90° max.

for wall(ceiling) installation respectively

with reference to the wall(ceiling) when

the inclination of camera module is 0°,

that is, the image is aligned horizontally.

3) Inclination limit

(Horizontal image alignment):

Inclination limited to +/-90° max.

Tabla de contenidos

Otros manuales de Cámara de seguridad de Vitek

Vitek

Vitek VTD-MVH2910 Manual de usuario

Vitek

Vitek VTC-EL52H Manual de usuario

Vitek

Vitek VTC-TNT5RFE-2 Manual de usuario

Vitek

Vitek VTC-EB15B Manual de usuario

Vitek

Vitek VTD-VS48B2 Manual de usuario

Vitek

Vitek VTC-IRE70 Manual de usuario

Vitek

Vitek Transcendent VTC-THB36R2F Manual de usuario

Vitek

Vitek VTC-C770DN Manual de usuario

Vitek

Vitek Transcendent VTD-TND4RFA3/-2 Manual de usuario

Vitek

Vitek VTC-IRLED24H Manual de usuario

Vitek

Vitek Transcendent VTC-TNB5RME Manual de usuario

Vitek

Vitek Transcendent VTC-TNT8RFS Manual de usuario

Vitek

Vitek VT-PTZ18 Manual de usuario

Vitek

Vitek Transcendent VTC-TNB8RFS-2 Manual de usuario

Vitek

Vitek VTD-TND5RMS Manual de usuario

Vitek

Vitek Transcendent VTC-THB5RM Manual de usuario

Vitek

Vitek Alpha VTD-A4F/I Manual de usuario

Vitek

Vitek Transcendent Series Manual de usuario

Vitek

Vitek VTC-TNT5RMEA Manual de usuario

Vitek

Vitek VTD-HOCR2812/V Manual de usuario

Vitek

Vitek VTC-IRE40 Manual de usuario

Vitek

Vitek VTC-HOCRAZ39 Manual de usuario

Vitek

Vitek OnCue VT-PTZ230HD Manual de usuario

Vitek

Vitek VTD-IR2811DN Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario