Visionhitech VC58EP-12 Manual de usuario

650TVL WDR True Day/Night

Box Camera

VC58EP-12 12VDC

VC58EP-24 12VDC/24VAC

Visionhitech Co., Ltd.

Dear Customers!

By selecting this product, you have decided to use a professional device that guarantees

highest quality and reliability. We would like to thank you very much for your confidence and

kindly ask you to read the following instructions carefully before Installation and operation in

order to take full advantage of all quality features regarding this product.

The lighting flash with an arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at its own

expense.

WARNING – Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

CAUTION – To prevent electric shock and risk of the fire hazards:

Do NOT use power source other than that specified.

Do NOT expose this appliance to rain or moisture.

CAUTION

RISK OF ELECTRIC

SHOCK

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE THE COVER (OR BACK)

This installation should be made by a qualified service person and should conform to

all local codes.

Table of contents

1. Precautions ------------------------------------------------------------------------------------------------------ 4

2. Limitation of liability ------------------------------------------------------------------------------------------ 5

3. Disclaimer of warranty --------------------------------------------------------------------------------------- 5

4. Package Contents --------------------------------------------------------------------------------------------- 5

5. Name and function of each part ---------------------------------------------------------------------------6

6. Installation -------------------------------------------------------------------------------------------------- 7 ~ 8

6-1. Lens

6-2. When using an auto iris lens (DC- drive)

6-3. When using a C-Mount Lens

6-4. When using a CS-Mount Lens

6-5. Power

7. Function and operation ----------------------------------------------------------------------------- 9 ~ 18

7-1.On Screen Menu(OSD)

7-2. Setting up the menu

7-3. DAY/NIGHT

7-4. AWB

7-5. AE

7-6. WDR

7-7. EFFECT

7-8. PRIVACY

7-9. MOTION

7-10. SYSTEM

7-11. RESET

7-12. EXIT

8. Troubleshooting --------------------------------------------------------------------------------------------- 19

9. Dimension ------------------------------------------------------------------------------------------------------ 20

10. Specification ------------------------------------------------------------------------------------------------- 21

1. Precautions

zPlease read the manual carefully before the installation in order to make use the

camera to be set up correctly and to have the best picture quality.

zPlease keep the manual in good condition for your future reference and service

application.

zInstallation and services should only be carried out by an authorized personnel

according to local safety regulations.

zIf any liquid or solid matter gets into the housing, immediately disconnect the

camera from power supply and have it checked by your authorized dealer before

reusing.

zAvoid installing the camera at extremely hot or cold places.

zIf you are not a certified person, never try to dismantle the camera. To avoid

electric shock, never remove the screws or covers. There are no parts inside that

need maintenance by the user. All maintenance should be carried out by qualified

personnel.

zAvoid installing the camera at a place of high humidity.

zAvoid installing the camera at the place exposed to gas or oil.

zKeep the top glass of the lens always clean in order to obtain the best picture

quality all the time. Be careful not to be stained by fingerprint.

zDon't face the camera directly toward sunlight or sunlight reflecting area.

The sensor may go defective at this condition.

zPlease give a special attention to keep the unit from dangerous drop or

external shock during the process of transportation or handling.

zNever try to touch the camera in wet hand. It may cause an electric shock.

zDo not expose the camera to radioactivity. It causes a serious damage on the

sensor.

2. Limitation of liability

This publication is provided “AS IS” without warranty of any kind, either express or implied,

including but not limited to, the implied warranties of merchantability, fitness for any particular

purpose, or non-infringement of the third party's right. This publication could include technical

inaccuracies or typographical errors. Changes are added to the information herein, at any time,

for the improvements of this publication and/or the corresponding product(s).

3. Disclaimer of warranty

In no event shall seller be liable to any party or any person, except for replacement or

reasonable maintenance of the product, for the cases, including but not limited to below :

(1) Any damage and loss, including without limitation, direct or indirect, special,

consequential or exemplary, arising out of or relating to the product;

(2) Personal injury or any damage caused by inappropriate use or negligent operation

of the user;

(3) Unauthorized disassemble, repair or modification of the product by the user;

(4) Inconvenience or any loss arising when images are not displayed, due to any reason

or cause including any failure or problem of the product;

(5) Any problem, consequential inconvenience, or loss or damage, arising out of the

system combined by the devices of third party.

(6) Any claim or action for damages, brought by any person or organization being

photogenic subject, due to violation of privacy with the result of that surveillance-

camera's picture, including saved data, for some reason, becomes public or is used

for the purpose other than surveillance.

4. Package contents

WDR Box Camera 1EA Instruction Manual 1EA C-Mount Adaptor

AutoIrisPlug1EA

5. Name and function of each part

(1) Photo sensor

(2) C-Mount lens adaptor

(3) Protective cover

(4) DC Iris Jack for DC Auto Iris Lens

(5) Back focus adjustment Knob

(6) Power indicator LED

(7) OSD Control button

(8) RS-485 Control port

(9) Video output (BNC Female)

(10)Power input terminal

(11)Mounting bracket holder

This mount bracket holder can be moved to

the top part.

6. Installation

6-1. Lens

Lens is not supplied with the unit. C-Mount or CS-Mount type of lens is available.

Please select a lens that has a good F-Stop number in order to get the best picture quality.

Using of DC auto iris lens is recommended to achieve the best results for operating this

product effectively.

☞Caution

Please make sure the surface of the lens is always clear. Clean dirt or water drops with soft

cloth in order to avoid the picture blooming or reflection.

☞NOTE

To get the best image quality, please use recommended lenses from the manufacturer or

camera supplier.

6-2. When using an auto iris lens (DC-drive)

1. Please take off the sleeve outer cable of the lens by 10mm.

2. Please take off the sleeve inner cable of the lens by 2mm.

3. Solder the wires on the pin-connector (iris-jack) supplied with the lens according to the pin

configuration as shown in the drawing.

4. Assemble the lens.

5. Connect the Auto Iris jack.

6-3. When using a C-mount Lens

●Please assemble C-Mount adaptor.

●C-Mount adaptor is included in the package.

●Fix the lens by turning it clockwise.

Pin No. Lens

No.1 Pin Damping -

No.1 Pin Damping +

No.1 Pin Drive +

No.1 Pin Drive -

6-4. When using a CS-mount Lens

●Take off the Protection cover.

●Take off the C-MOUNT adaptor(if any).

●Assemble the CS-MOUNT lens by turning it clockwise.

6-6. Power

12VDC camera

Please make sure to use a UL/CE approved and

12VDC/500mA regulated power supply.

12VDC/24VAC Dual Power camera (Option)

Please use either 12VDC Power of 24VAC Power

Source with non-polarity connection.

- When used with an Auto Iris lens, please insert the

iris jack into the Iris socket which is located on the

right side of the camera.

- Please set the lens mode by using OSD Switch on

the back of the camera depending on the type of

selected lens.

☞Caution

- Use the lens as shown in the picture here.

- When the lens is out of the spec, it could damage the camera inside

or may not be correctly fit with the camera.

- Use the lens less than 450g. Heavier lens can damage the camera.

7. Function and operation

7-1. On Screen Menu

MAIN MENU

DAY&NIIGHT D/N MODE

BURST

D TO N LUX

N TO D LUX

D/N DELAY TIME D/N RESSET RETURN

AWB AWB MODE ATW MODE RED

BLUE

AWB RESET RETURN

AE IRIS MODE

BRIGHHTNESS

FLICKERLESS

SHUTTEER

AGC

DSS

AE SPEED

AE RESET

RETURN

WDR WDR MODE WDR LEVEL

USER LEVEL

BLC MODE WDR RESET RETURN

EFFECT SHARPNESS

COLOR ADJUST

REVERSAL

DIGITAL ZOOM

BLEMISH

DNR ADJUST

DIS

EFFECT RESET

RETURN

PRIVACY AREA NUM

MASK DEFINE

MASK COLOR

BLEND LEVEL

MOSAIC

MASK SIZE

MASK POSITION

PRIVACY RESET

RETURN

MOTION MD NUM

MD DEFINE

MD LEVEL

MD DISPLAY

MD SIZE

MD POSITION

MD RESET

RETURN

SYSTEM CAMERA ID

ID DISPLAY

NAME DISPLAY

485 TERM

BAUD RATE

FIRMWARE

SYSTEM RESET RETURN

RESET FACTORY INIT RETURN

EXIT

7-2. Setting up the menu

Settings can be made using the OSD Switch located on the back of the camera.

1. Press the button to access the SETUP mode.

The SETUP menu is displayed on the

monitor.

2. Please select any function you wish to

activate by using the UP/DOWN selections.

The cursor can be moved up or down by

using the UP/DOWN selections.

Position the cursor to point to the function

you wish to operate.

* MAIN-menu : Use UP/ DOWN selections. / SUB-menu : Use PUSH selection

3. Change the status of the selected feature using the LEFT/RIGHT selections.

When the LEFT or RIGHT selection is done, available values and modes are displayed in

order.

Please keep the selection until you get to the mode you wish to operate.

4. When completed, move the cursor indicator to ‘EXIT’ position and press the Button to finish

the setting.

7-3. DAY/NIGHT

You can display pictures in COLOR/BW/AUTO.

(1) D/N MODE : AUTO / COLOR / BW (Default : AUTO)

1. Please position the cursor on ‘DAY/NIGHT’ on the

SETUP menu by using the UP and DOWN selections.

2. Please select the mode you wish to operate by using the

LEFT and RIGHT selections.

- COLOR : The picture is always displayed in color.

- BW : The picture is always displayed in black and white.

- AUTO: Automatically turns between Day and Night Mode according to CDS operation.

(2) BURST (Default : OFF)

-Burst signal can be turned to on/off.

(3) D TO N LUX (Default : 5LUX)

- Day to Night switching lux level is adjustable.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cámara de seguridad de Visionhitech

Visionhitech

Visionhitech VN6XSFHD2 Manual de usuario

Visionhitech

Visionhitech VC58EHi Manual

Visionhitech

Visionhitech VD80SFHD2-VF Manual de usuario

Visionhitech

Visionhitech VD80AHD Manual de usuario

Visionhitech

Visionhitech VQ29SFHD2 Manual de usuario

Visionhitech

Visionhitech VD120TH-12 Manual de usuario

Visionhitech

Visionhitech VB21S3 Manual de usuario

Visionhitech

Visionhitech VD70CSHR-36IR Manual de usuario

Visionhitech

Visionhitech VD101SMi Manual

Visionhitech

Visionhitech VN6XEH Manual de usuario

Visionhitech

Visionhitech VC56TH -12 Manual de usuario

Visionhitech

Visionhitech VD70S3 Series Manual de usuario

Visionhitech

Visionhitech VD70CS(X) - 36IR Manual de usuario

Visionhitech

Visionhitech VPD200SM2i Manual

Visionhitech

Visionhitech VC58SMi Manual de usuario

Visionhitech

Visionhitech VDA101S3-VFIR Manual de usuario

Visionhitech

Visionhitech VA300 Manual de usuario

Visionhitech

Visionhitech VC58S Manual de usuario

Visionhitech

Visionhitech VDA100EHi Manual

Visionhitech

Visionhitech VDA30PN Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario