Visionasia N8760B Manual de usuario
Thank you for purchasing N8760B Digital Satellite Receiver.
This manual will help you to install, use and maintain the receiver. Please read this manual
carefully before operating your unit and keep it for future reference.
Warning & Note
In this manual, pay special attention to the following marks that indicate hazardous situations.
Warning: Alert user to the operation which could result in device damage or data loss, and
the presence of a hazardous situation which could result in serious injury.
Note: Remind user of presence of possible problems and information of any importance to
help understand, use and maintain the installation.
Note: The information in this user’s manual is subject to change without notice. The
photos and function explanations in the manual are for reference. If any discrepancy
exists, please refer to the entity.
User’s Manual
I
Safety Instruction
Read following items carefully before operating this receiver.
Installation
This receiver should be installed horizontally. Unbalanced installation may cause damage.
Install the receiver in a place with:
good ventilation (leave space not less than 10cm around this receiver)
no heat source (burning candle, radiator, heater, fireplace, amplifier, etc)
suitable temperature
against humidity (especially bathroom, kitchen, etc)
no direct sunlight
low vibration
Maintenance
Unplug this receiver from power socket before changing connections between this unit and
other related equipments.
Don’t unplug or insert signal, audio and video cables when this receiver is turned on.
To avoid the risk of lightning strike, unplug power cord of the receiver from power socket in
lightning storm.
Unplug power cord from power socket when the unit is not used for a long time or damaged
accidentally.
Turn off this unit first, after 1 to 2 hours turn it on when move this receiver from a cold
environment to a hot environment or vice versa.
To avoid the risk of fire or electric shock, don’t expose this receiver to rain, splashing and
don’t put object with liquid on this unit.
Do not cover vents of this receiver with newspaper, table cloth, curtain, etc.
Don’t put heavy objects on this receiver.
Unplug power cord of this receiver from power socket before cleaning. To reduce damage,
clean this unit with dry cloth. Do not let liquid and spray flow into this device to avoid seri-
ous damage.
There is dangerous voltage in product enclosure. Do not remove the cover (or back) to
avoid the risk of fire or electric shock.
Power Socket and Power Cord
Power socket should be available near the receiver and well grounded.
Do not insert or pull out power cord with wet hands to avoid electric shock or fire.
Do not use damaged power cord. If power cord is damaged, contact your local operator for
replacement to avoid risk of fire or electric shock.
Do not excessively bend power cord, and do not place heavy objects on it, which could
cause damage, electric shock or fire.
RCU Battery
Batteries should be installed in accordance with the polarity markings (+/-) on battery
compartment.
Remove batteries if RCU is not used for a long time.
User’s Manual
II
vReplace batteries if there is no enough power and dispose battery waste properly for en-
vironmental protection.
Others
vAll-pole power switch of this receiver is on rear panel. Switch it to “I”, related equipment will
connect with power supply. Switch it to “o”, related equipment will disconnect with power
supply completely.
vOnly use accessories specified by the manufacturer, as other unsupported accessories
may cause damage to the receiver.
Warning Mark
This mark appearson rear panel of this receiver, painted prominently in contrasting color to
background. It consists of two graphical symbols and warning messages. The detailed speci-
fications are as follows:
Warning: To reduce the risk of electric shock, don’t remove the cover (or
back). Equipment service and maintenance should be undertaken by
qualified personnel.
This symbol alerts user to the presence of uninsulated “dangerous voltage”
in product enclosure that sufficient magnitude will constitute risk to person.
This symbol reminds user of presence of important operation and mainte-
nance instructions in literature accompanying this receiver.
User’s Manual
1
Contents
1. Before Using the Receiver ..................................................................................................3
1.1 Main Feature ................................................................................................................. 3
1.2 Front Panel ................................................................................................................... 4
1.3 Conditional Access (CA) ............................................................................................... 4
1.4 Rear Panel .................................................................................................................... 5
1.5 Remote Control Unit (RCU) .......................................................................................... 6
2. Installation ............................................................................................................................9
2.1 Signal Input ................................................................................................................... 9
2.2 Connect TV ................................................................................................................... 9
2.3 Connect other Device ................................................................................................. 11
2.4 Power on ..................................................................................................................... 11
2.5 Search Channel .......................................................................................................... 11
3. Basic Operation..................................................................................................................12
3.1 Channel Switch ........................................................................................................... 12
3.2 Volume Control ........................................................................................................... 12
3.3 Channel Information Bar ............................................................................................. 12
3.4 Channel List ................................................................................................................ 13
3.5 Audio Selection ........................................................................................................... 13
3.6 Teletext........................................................................................................................ 13
3.7 Subtitle ........................................................................................................................ 14
3.8 Closed Caption (CC) ................................................................................................... 14
3.9 PVR Shortcut Key Menu ............................................................................................. 14
4. Personal Video Recording (PVR)......................................................................................14
4.1 Set Recording Parameter ........................................................................................... 14
4.2 Quick Recording ......................................................................................................... 15
4.3 Schedule Recording.................................................................................................... 15
4.4 Operation while Recording.......................................................................................... 16
4.5 Playback Recorded File .............................................................................................. 17
4.6 Edit Recorded File ...................................................................................................... 19
4.7 Time Shift .................................................................................................................... 20
5. USB Application.................................................................................................................21
5.1 MP3............................................................................................................................. 21
5.2 Digital Photo................................................................................................................ 21
6. USB Device Management..................................................................................................21
6.1 Clear up USB Device .................................................................................................. 21
6.2 Format USB Device .................................................................................................... 22
7. Electronic Program Guide (EPG)......................................................................................22
7.1 View EPG Information................................................................................................. 22
7.2 Schedule Program ...................................................................................................... 23
7.3 Schedule Manage ....................................................................................................... 23
8. Channel Search..................................................................................................................23
8.1 Antenna Setting........................................................................................................... 23
8.2 DiSEqC1.2 .................................................................................................................. 24
8.3 Rename Satellite......................................................................................................... 24
8.4 Transponder (TP) Edit................................................................................................. 25
8.5 Search Type ................................................................................................................ 25
User’s Manual
2
9. Edit Channel .......................................................................................................................26
9.1 Delete Channel ........................................................................................................... 26
9.2 Lock Channel .............................................................................................................. 27
9.3 Move Channel ............................................................................................................. 27
9.4 Set Favorite Channel .................................................................................................. 27
10. System Setting .................................................................................................................27
10.1 Common Set ............................................................................................................. 27
10.2 Video Set................................................................................................................... 27
10.3 Resume Default ........................................................................................................ 28
10.4 Modify System Password.......................................................................................... 28
10.5 Parental Guide (PG).................................................................................................. 29
11. OTA (Over the Air) Upgrade............................................................................................29
12. Information........................................................................................................................29
12.1 Smart Card Status..................................................................................................... 29
12.2 Softcell Service Status .............................................................................................. 29
12.3 Loader Status ............................................................................................................ 30
12.4 Components.............................................................................................................. 30
12.5 Mail Information ........................................................................................................ 30
13. Appendix...........................................................................................................................31
13.1 Trouble Shooting....................................................................................................... 31
13.2 Specification.............................................................................................................. 32
13.3 Acronym .................................................................................................................... 33
User’s Manual
3
1. Before Using the Receiver
1.1 Main Feature
PVR supported
Time shift supported
Dolby 5.1 supported
MP3 playing and photo browse
Teletext/Subtitle/Closed Caption supported
EPG supported
Favorite channel group
Memory space up to 5000 channels
Support satellite and TP search
Powerful channel editing function
Parental guide (PG) supported
System password supported
PAL/NTSC supported
Software upgrade supported
Timer function supported
Standby with low power consumption
HDMI output: support 1080p
YPbPr output: support 1080i
S/P DIF supported
USB 2.0 interface supported
DiSEqC1.0/1.2 supported
Irdeto CA supported
User’s Manual
4
1.2 Front Panel
Name Function
1. Switch between operation and standby modes
2. IR Receive infrared remote control signal
3. DISPLAY Display status
4. MENU Display/exit from main menu
5/9. Adjust volume or move cursor left/right
6. OK Display channel list or confirm operation
7/8. Switch channels or move cursor up/down
10. USB slot Connect to specific USB device
11. Smart card slot Open the cover to insert smart card
1.3 Conditional Access (CA)
With smart card, you can enjoy various programs of channels scrambled by Irdeto.
Note: The smart card is provided by your local operator.
Insert Smart Card
Open the right-hand cover on front panel.
Face the side with electronic chip downwards and insert
the smart card into the upper slot horizontally according to
arrow direction.
Notes:
Only FTA channels are available without the smart
card.
Don’t attempt to remove or insert the smart card while the receiver is on.
User’s Manual
5
1.4 Rear Panel
Name Function
1. LNB IN Connect to satellite dish
2. LOOP OUT Loop output RF signal to another receiver
3. HDMI Output video and audio signal to TV (support high definition
output)
4. Y/Pb/Pr Output Y/Pb/Pr video signal to TV (support high definition
output)
5/6. R/L-AUDIO Output right/left audio signal to TV or amplifier
7. VIDEO Output CVBS video signal to TV
8. S/P DIF Output digital audio signal to amplifier
9. 100-240V~ AC power supply
10. ON/OFF Power switch
User’s Manual
6
1.5 Remote Control Unit (RCU)
Name Function
1. Learning keys
Please refer to Learning Key.
2. The keys of the receiver
STB POWER Switch between operation and
standby modes
MUTE Mute/restore sound
AUDIO Display audio selection window
0 ~ 9 Switch channels or input numbers
P+/- Page down/up
LAST Back to previously viewed channel
INFO Display channel information bar
Switch channels or move cursor
up/down
Adjust volume or move cursor
left/right
OK Display channel list or confirm opera-
tion
MENU Display/exit from main menu
EPG Display program guide (EPG)
FAV Display favorite channel list
EXIT Back to previous menu or exit from
operation
TELETEXT Display Teletext information
SUBTITLE Display Subtitle list
CLOSECAPTION Switch on/off Closed Caption
Other keys Reserved
Tabla de contenidos
