VisionAid International ReadEasy Move 2 Manual de usuario

ReadEasy Move 2 Software v5.0.x

Standard User Manual

English, Revision B

VisionAid International

Page 2

Table of Contents

Table of Contents................................................................................................. 2

Introduction......................................................................................................... 3

Improvement program ........................................................................................ 3

Ownership and intellectual property................................................................... 4

Box contents ........................................................................................................ 4

Unpacking............................................................................................................ 5

Carry Handle ........................................................................................................ 6

Positioning for use ............................................................................................... 6

Contrast / positioning mat................................................................................... 7

Plugging in ........................................................................................................... 8

Power adapter .................................................................................................. 8

Connecting the camera ..................................................................................... 8

Turning on / off.................................................................................................... 9

Lighting adjustment ............................................................................................11

Controls ..............................................................................................................12

Audio ..................................................................................................................16

Multi-Language...................................................................................................17

Reading documents with different languages..................................................17

Obtaining additional languages / feature packs...............................................17

Activating additional languages .......................................................................17

Supported languages .......................................................................................18

Upgrading software ............................................................................................21

FAQ and Troubleshooting ...................................................................................22

Appendix A: Safety..............................................................................................24

Appendix B: Technical Information.....................................................................25

VisionAid International

Page 3

Introduction

Congratulations on choosing the ReadEasy Move 2 digital capture reading system.

The ReadEasy Move 2 combines ease of use with the highest quality speech

output and the world’s fastest text recognition. It can capture and read any

printed material such as letters, bank statements, newspapers, food packaging

etc. and reads the text aloud using a natural sounding voice.

Improvement program

Users are the best people to help us improve and develop our products so if you

have any ideas or suggestions, no matter how small, please do contact us.

Suggestions contact information

Please use the following methods to contact us regarding your suggestions:

Email:

suggestions@visionaid.com

Post:

ReadEasy Move 2 Suggestions

VisionAid International Ltd.

Bridge Lodge, Spalding, Lincolnshire

PE11 3AU

United Kingdom

Phone:

+44 (0) 1775 711 977

Thank you and we wish you many hours of enjoyment with your new personal

reading assistant!

VisionAid International

Page 4

Ownership and intellectual property

The software installed on the ReadEasy Move 2 makes use of third party software

libraries that are redistributed under their own respective licenses.

LAME is distributed under the terms of the GNU Lesser General Public License

(LGPL), a copy of which can be found at http://www.gnu.org/licenses/lgpl.html

and is included in the software’s program directory.

OpenCV is distributed under the terms of the Berkeley Software Distribution

(BSD) license, a copy of which is included in the software’s program directory.

Third party copyrights are property of their respective owners.

Box contents

Your ReadEasy Move 2 box contains the following items:

1. ReadEasy Move 2 carry case

2. ReadEasy Move 2 digital capture reading system

3. ReadEasy Move 2 camera

4. Power supply and power cord

5. White contrast / positioning mat

6. Laminated quick reference guides (version dependent)

7. Standard paper user manual and optional paper Feature Pack manual

8. Audio CD user manual

9. Over ear headphones with in-line volume control

10. Optional keypad (if Keypad or Low Vision Touch Feature Pack

purchased)

11. Optional trackball (if Low Vision Touch Feature Pack purchased).

If any of these items are missing from your package, please contact your local

distributor.

VisionAid International

Page 5

Unpacking

Lift ReadEasy Move 2’s carry bag out of its

shipping box and lay it down onto a flat surface

with the shoulder straps touching the table, and

the handle (which is normally located on the top

of the bag when upright) facing towards you.

The bag has two main compartments, both with

double zips as well as a small single zip pocket

(located right on the top) and two small zipped

side pockets.

Firstly, remove the main ReadEasy Move 2 unit

from the padded Velcro sealed bag in the lower

compartment. ReadEasy Move 2’s handle will be facing upwards ready to grasp

hold of to help you easily remove it.

Then, remove the white contrast / positioning mat (and large print

documentation if required), located above the padded Velcro bag, held in place

by a divider.

Then remove the camera, power adapter, power cable and headphones (if

required) which are located in the higher double zip compartment.

Connect the power cable to the power supply ‘brick’.

If you have purchased the optional feature pack, the keypad and trackball will

also be located in the same compartment. Remove these if present and

required.

5) Keypad (optional)

VisionAid International

Page 6

Carry Handle

ReadEasy Move 2 features an integrated foldable carrying handle making it easy

and safe to move from room-to-room.

The carry handle lays flat against the back of the unit when not in use. By lifting

the handle into its upright position it is then easy to grasp and move the unit.

When packing ReadEasy Move 2 back into its carry bag, you can lower the unit

into the Velcro sealed padded section with the handle up and leave it facing

upwards making it easy to grasp when removing the unit.

Positioning for use

When placing ReadEasy Move 2 on a surface to use, ensure that the surface is flat

and is large enough for you to position the items you wish to capture under the

camera. Also ensure that the unit is not directly underneath any bright lighting,

as this can affect its accuracy when reading glossy documents.

VisionAid International

Page 7

Contrast / positioning mat

ReadEasy Move 2 also includes a contrast / positioning mat. This can be used if

the surface where the ReadEasy Move 2 is located is very dark or textured and

the item wishing to be read is small (e.g. a postage receipt or small packet of

food).

To position the mat, ensure ReadEasy Move 2 is located on a flat surface where

you wish to use it. Then, make sure the contrast mat is folded flat (the top

section is folded over for transport). There is a “finger” at the top of the mat

that can be slid around the back of the ReadEasy Move 2, from left to right.

Ensure the “finger” is held flat with the index finger on your left hand as you

slide the mat from right to left until it fits snugly up against the left side.

When in position,

the mat also doubles

as a positioning

guide, as its size

roughly represents

the capture area.

VisionAid International

Page 8

Plugging in

Power adapter

1. Plug the power cable into the power adapter.

2. Plug the power tip from the power brick into ReadEasy Move 2’s power

socket, located on the back side, in the very bottom right corner.

3. Insert the mains plug into a wall socket and ensure it is switched on.

VisionAid International

Page 9

Connecting the camera

ReadEasy Move 2 features a unique, magnetised, easy release camera system.

The slot for the camera (coloured blue) is located on the top edge of the main

unit, on the left hand side.

With the rectangular section of the camera facing downwards (also coloured

blue) and the main length of the camera arm facing towards you, slowly lower

the blue rectangular section over the blue camera slot. As you do so you will feel

it magnetise firmly into position.

The camera will only go into its slot one way round and does not require much

force at all.

To disconnect the camera, grasp it firmly at the back (above the camera slot) and

simply pull it directly upwards.

VisionAid International

Page 10

Turning on / off

To turn on ReadEasy Move 2, ensure it is plugged in, mains power is switched on

and that the camera is connected. Then, press the on / off button, located on the

right side of the machine, 1 inch, (2.5 cm), from the top and 0.5 inch, (1.3cm),

from the back.

After pressing, the on / off button will immediately illuminate with a blue ring.

You will not hear anything from the device until it announces that is ready,

approximately 13 seconds after being switched on.

To turn ReadEasy Move 2 off, simply press the on / off button again.

IMPORTANT:

It takes approximately 10 seconds for ReadEasy Move 2 to power off when

the on / off button has been pressed, so if you wish to unplug the unit, please

do not do so until this time has passed.

On / off button

Tabla de contenidos

Manuales populares de Lector de tarjetas de otras marcas

Lindy

Lindy 43185 Manual de usuario

Lindy

Lindy 43185 Manual de usuario

ViziT

ViziT RD-4F Manual de usuario

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manual de usuario

AVID ID

AVID ID AVID1043 Manual de usuario

Conrad

Conrad PCMCIA Manual de usuario

Rosslare

Rosslare DR-6255 Manual de usuario

Lindy

Lindy 51541 Manual de usuario

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manual de usuario

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manual de usuario

ACS

ACS ACR122L Manual de usuario

Secukey

Secukey S2-MF Manual de usuario

Elecom

Elecom MR-SMC07 series Manual de usuario

Alien

Alien ALR-9800 Manual de usuario

ACS

ACS ACR310 Manual de usuario

Datamars

Datamars R-IN1300 MID Manual de usuario

Alarm Lock

Alarm Lock AL-PRE2 Manual de usuario

xpr

xpr B100PROX-AH Guía del usuario