Virgin Mobile USB modem Manual de usuario
User Guide
BROADBAND
E160e
USB Modem
Get online fast – see page 2
2
IS YOUR ACCOUNT ACTIVATED?
Pre-Paid Customers
First up, you need to activate your service:
CLICK virginmobile.com.au/activate
NB: You’ll need a different internet connection to
activate online.
or CALL 1300 763 039
See page 7 for the final steps to get online.
Post-Paid Customers
Your service is already activated, so head to page 7 for the final steps to get online.
TOP SECRET NOTES
E-mail Address: @virginbroadband.com.au
E-mail Password:
Service Number: __ __ __ __ __ __ __ __ __ __
Account PIN: __ __ __ __ __ __
See page 5 for tips on managing your account.
0 4
3
TABLE OF CONTENTS
Is your account activated? 2
What’s in the box? 4
Welcome 5
Managing your account 5
System requirements 6
Easy setup in 3 steps 7
Your first connection 11
LED status information 13
Setting up your email 14
USB modem information 14
Safety information 17
Compliance & Disclamer 21
Trademarks 22
Questions? 23
4
WHAT’S IN THE BOX
• Virgin Mobile USB modem
• USB one port extension cable
• User Guide with SIM card attached, if it’s not already in the modem.
GETTING TO KNOW YOUR DEVICE
FEATURES
• HSDPA/UMTS (900/2100MHz).
• GSM/GPRS/EDGE (850/900/1800/1900MHz).
• Check your connection instantly with the built-in LED indicator.
• Micro SD Card Slot.
• Plug & Play.
• Compatible with nearly all modern desktop and laptop computers equipped with Microsoft Windows
or Mac OS X operating systems.
5
WELCOME TO VIRGIN MOBILE
Congratulations! That cool gadget you’ve got in your hands is going to let you take the internet with you,
so you’ll never have to miss a beat.
Your new USB modem is easy to connect. You don’t have to waste time configuring advanced settings -
simply plug it into a compatible computer and let the installer work its magic! You’ll be surfing the web in
no time.
MANAGING YOUR ACCOUNT
Checking Your Data Usage & Topping Up Your Account
To check your usage, go to mybroadbandusage.virginbroadband.com.au and log in using your full Virgin
Broadband email address and password.
Need More Data?
You can recharge online anytime:
Log in at virginmobile.com.au/myaccount with your service number and the 6-digit PIN you picked
when activating the service.
• Got a voucher or recharge card? Enter the 12 digit number.
• Got a credit card? Enter your credit card details & choose your amount
The credit will appear on your account within 15 minutes.
6
Using webmail
To use the Virgin Broadband Webmail service, go to webmail.virginbroadband.com.au and log in with
your full Virgin Broadband email address and email password.
Checking your account details
To check your account details, go to virginmobile.com.au and log in with your service number and the 6
digit PIN you set up when you opened the account.
Managing your E-mail address
You can delete, edit and manage your existing email addresses or add new ones through the following
page: mybroadbandusage.virginbroadband.com.au.
Log in by using your full Virgin Broadband email address and email password.
If you’d prefer step by step instructions with some handy images for reference, visit our online FAQ’s:
virginmobile.custhelp.com
SYSTEM REqUIREMENTS
• Standard USB interface.
• Windows XP Service Pack 2, Windows Vista.
• Mac OS X 10.4 and 10.5 with the latest updates installed.
• The hardware of your computer must meet or exceed the recommended system requirements for
the installed version of your Operating System.
• Display resolution: 800 x 600 or above.
7
USING YOUR VIRGIN MOBILE E160E MODEM
1. Inserting the SIM
If your Virgin Mobile SIM is not already installed, follow the steps below.
2. Connecting your modem to your computer
1. Connect the modem to your computer.
2. Alternatively, you can use the supplied USB extension cable to connect the modem to
your computer.
8
3. Follow the relevant steps on page 9 to install the connection software.
9
3. Installing the connection software
Software installation for Windows
• Make sure the Modem is powered on.
• After connecting the Modem’s USB cable to your computer, the set-up software will run automatically.
• If the software does not run automatically, go to “My Computer”, which should be located on
your Windows desktop, and browse to the disk drive labelled “VIRGINMOBILE”. Double-click on
“Autorun.exe”, to start the installation program
1. Choose ‘Install’ and then click ‘Continue’.
2. Please read, and agree to, the Software Licence Agreement and leave the installation directory
unchanged. The software will start installing and a progress screen will be displayed.
3. Once the software and drivers have installed, click ‘Finish’.
4. Your computer will now use the new software to properly configure your modem. An information
balloon will pop up from your System Tray when the process is finished. This may take several
minutes.
5. When the install is finished the Virgin Mobile connection software will start.
6. Click ‘Connect’. Open your Internet browser (e.g. Internet Explorer).
7. You are now connected to the Internet and ready to start surfing!
If you’d prefer step by step instructions with some handy images for reference, visit our online FAQ’s:
virginmobile.custhelp.com
10
Software installation for Mac OS X
1. Make sure the computer is powered on.
2. After connecting the USB modem using the supplied USB cable, a folder containing the installation
software will automatically open.
3. Under ‘Install’ or ‘Run Program’, double-click on ‘Virgin Mobile’ to begin the installation process.
4. Please read and agree to the Software Licence Agreement and click ‘Continue’ to proceed.
5. If you agree to the terms of the Software Licence Agreement, click ‘Agree’ to proceed.
6.
Select the disk drive where you want to install the Virgin Mobile connection software and click ‘Continue’.
7. Choose ‘Easy Install’.
8. You’ll be prompted for an administrator password to allow the software package to be installed. In
most cases this will simply be the password you use to log onto the computer. Click ‘OK’ to continue.
9. When you see the message “The software was successfully installed”, click ‘Close’ to finish.
10. Your computer will now start the Virgin Mobile connection software.
11. Click the ‘Connect’ button. Open your Internet browser (e.g. Safari).
12. You are now connected to the Internet and ready to start surfing!
If you’d prefer step by step instructions with some handy images for reference, visit our online FAQ’s:
virginmobile.custhelp.com
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Módem de Virgin
Virgin
Virgin Broadband2Go Manual de usuario
Virgin
Virgin MC760 Manual de usuario
Virgin
Virgin MF62 Manual de usuario
Virgin
Virgin Home Modem Manual de usuario
Virgin
Virgin USB modem Manual de usuario
Virgin
Virgin USB modem Manual de usuario
Virgin
Virgin Mini WiFi Modem Manual de usuario
Virgin
Virgin USB modem Manual de usuario
Manuales populares de Módem de otras marcas
US Robotics
US Robotics 3453C Manual de usuario
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario
Zte
Zte MF823 Manual de usuario
Four-Faith
Four-Faith F1403 Manual de usuario
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manual de usuario
Gemtek
Gemtek WiMAX WIXFBR-103 Manual de usuario