Vinotemp 700 Manual de usuario

Este manual sirve para los siguientes modelos

1

Tabla de contenidos

Otros manuales de Enfriador de vino de Vinotemp

Vinotemp

Vinotemp 2500SSR Manual de usuario

Vinotemp

Vinotemp Wine-Temp WM-6500HZD-DE Instrucciones de uso

Vinotemp

Vinotemp VT- 2 6 SB1 0 Manual de usuario

Vinotemp

Vinotemp VT-15 TS Manual de usuario

Vinotemp

Vinotemp VT-100 WINEDISP4 Manual de usuario

Vinotemp

Vinotemp Wine-Mate WM-1500CD Instrucciones de uso

Vinotemp

Vinotemp VT-140 TS Manual de usuario

Vinotemp

Vinotemp 100WC Manual de usuario

Vinotemp

Vinotemp WINE-MATE WM-1500HTD Manual de usuario

Vinotemp

Vinotemp WINE-MATE VINO3500HZD Manual de usuario

Vinotemp

Vinotemp VT-48TEDS-2Z Manual de usuario

Vinotemp

Vinotemp VT-45 Manual de usuario

Vinotemp

Vinotemp VT-VC190BG Manual de usuario

Vinotemp

Vinotemp VT-32TS-FE Manual de usuario

Vinotemp

Vinotemp VINCAVE 200 Manual de usuario

Vinotemp

Vinotemp VT-34 TS Manual de usuario

Vinotemp

Vinotemp WINE-MATE WM1500 HTD-TE Manual de usuario

Vinotemp

Vinotemp VT-52SN Manual de usuario

Vinotemp

Vinotemp Wine-Mate WM-2520SSR Guía de instalación

Vinotemp

Vinotemp VT-21-TEDS2Z Manual de usuario

Vinotemp

Vinotemp VT60 Manual de usuario

Vinotemp

Vinotemp VT-165TSRV Manual de usuario

Vinotemp

Vinotemp VT-38 Manual de usuario

Vinotemp

Vinotemp VT-12TEDS Manual de usuario

Manuales populares de Enfriador de vino de otras marcas

U-Line

U-Line Echelon Wine Captain 2075WC Manual del propietario

Haier

Haier WS50GA Manual de usuario

Cavist

Cavist 62 Manual de usuario

Kenmore

Kenmore 461.99130 Manual de usuario

Miele

Miele KWT 6422 iG Manual de usuario

Danby

Danby DWC113BLSDB Manual de usuario

Caple

Caple Wi6128 Manual de usuario

Avanti

Avanti WC1001 Manual de usuario

Frigidaire

Frigidaire FFWC38F6LS Manual de usuario

Titan

Titan TT-W2454SZ Manual de instalación

Klarstein

Klarstein Botella 166 Uno Manual de usuario

Costway

Costway FP10130WL Manual de usuario

Lemair

Lemair LWC59 Manual de usuario

Haier

Haier JC-125GEA Manual de usuario

Caple

Caple WCi46B Manual de usuario

Climadiff

Climadiff CLI24 Guía rápida

Viking

Viking VCWB301LSS Manual de usuario

Caple

Caple WC6511 Manual de usuario

Disassemble/Assemble instructions

FOR YOUR PERSONAL WINECELLAR

BEFORE PROCEEDING, PLEASE READ ALL INSTRUCTIONS FIRST!

The tools required for disassembly and reassembly of your custom Winecellar are as follows:

A) 7/16 Wrench

B) Phillips Head Screwdriver

C) Metric 4mm Hex Wrench

D) 1/4” Nut Driver

You will need a clean level area. It will be necessary for 2 or 3 people to help in disassembly to

complete the following instructions:

1. Remove shipping carton and packing material with exception to pallet. Open door

and remove the plastic bag containing four or six casters depending on the size of

unit.

2. Place the cardboard on ground behind winecellar.

3. With the 7/16” wrench, remove the two baits at the top of cooling unit. Carefully

slide the unit out and place it on the ground out of the way in an upright position,

being careful not to damage the insulated bottom.

4. If you have a model 700, remove the middle bar by removing center screw in

back brace, then remove screws on top and bottom of middle bar.

5. Carefully remove the screws that are on the cabinet side of the hinge making sure

someone is holding the door while screws are being removed. Place the door on

cardboard to the side of winecellar.

6. With the Phillips Head Screwdriver or 1/4” Nut Driver carefully remove the

screws holding the bottle racks, be sure to save the screws which are located in

the top back of rack. Remove entire rack. (Standard cellar trellis racks)

Note:Models with horizontal support bar (single door 440 and single door 400),

the bar must be removed prior to removing rack.

Removal of E-Line (Black Metal) Racks:

-Remove the cellar trellis row sticks from the top of rack.

-Remove the rack spacers on each side, one by one, starting from the

bottom and proceeding to the top.

-Remove the four black metal grids one by one.

-Remove spacers from bottom of unit.

Page 1 of 2 DISASSEMBLY/ASSEMBLY INSTRUCTIONS FOR

YOUR PERSONAL WINECELLAR

7. Carefully tilt

the unit back and place’on cardboard packing or padding so as to

not damage the cabinet.

8. With the 4mm Hex Wrench, careftilly remove bolts on side of cabinet and

place side on cardboard.

9. Having someone holding the top and bottom ends, remove bolts on other side.

Place the side on cardboard.

10. Remove the bolts at top of unit. Place top on cardboard.

Now your winecellar is ready to be carefully moved into its final destination.

ASSEMBLY INSTRUCTIONS

1. Install the casters all the way in on the bottom piece first.

2. To assemble our unit follow the disassembly instructions in reverse.

3. If doors appear not to be aligned, level the cellar as best possible by screwing the

casters back out slowly checking alignment with each adjustment.

4. The unit can be moved to your desired location, being sure to allow 5 to 6 inches

of clearance from the back of winecellar to the wall.

5. Your unit is now ready. to plug into a dedicated 110/115 volt outlet for your

winecellar. We recommend that you do not plug your winecellar into an outlet

used for other electronic items in addition to the winecellar.

Page 2 of 2