Vingtor Stentofon TCIV-2 Guía
Mounting Manual
TCIV Turbine IP Video
1 Turbine IP Video Stations
This document specifies the dimensions, mounting procedure, and camera field of view of the Turbine IP
Video Stations. The Turbine Video series comprises the following stations & accessories:
ITEM NUMBER TYPE ITEM NAME
1008115020 TCIV-2 Turbine Compact IP Video - stainless steel front plate
1008115030 TCIV-3 Turbine Compact IP Video - thermoplastic front plate
1008115060 TCIV-6 Turbine Compact IP Video - thermoplastic front plate with PMOLED display
1008140010 TA-1 Turbine On-Wall Back Box
1008140020 TA-2 Turbine Flush Mount 2-Gang Double-Depth Backbox
1008140050 TA-5 Turbine Bracket for Flush Mount Backbox
1.1 TCIV Station Dimensions
96 mm
156 mm
52 mm 20.5 mm
3.78”
6.14”
0.81”
2.05”
180 mm
120 mm
4.72”
7.09”
TCIV-2 TCIV-3 TCIV-6
2 On-Wall Surface Mounting
2.1 On-Wall Surface Mount Backbox - TA-1
2.2 On-Wall Surface Mounting Procedure
1. Mount the backbox onto the wall
2. Fit the gasket onto the backbox with the ridged side facing down
–Plug the Ethernet cable into the RJ-45 port on the station
3. Mount the Turbine station onto the backbox with the M5 fasteners provided
76 mm
150 mm
D6.5 mm
25 mm
120 mm
Mounting holes are to be drilled
as shown.
Max. recommended screw
diameter: ISO M6 or ANSI 1/4".
Screw length must be greater
than 25 mm or 1".
A4 stainless steel socket head
screws/bolts are recommended.
Max. recommended screw
head diameter: 9.5 mm or 3/8".
3”
5.90”
4.72”
1”
0.25”
D
Mounting Hole
Mounting Hole Mounting Hole
Mounting Hole
Optional plastic washers for extra
protection against corrosive effects
between surfaces are provided.
They should be placed at the bottom
of the 4 mounting holes.
Grommets and an M20 cable gland
are provided.
cable holes
M20 M16
Surface Mount Back Box
Gasket
Turbine Station
1
2
3
Microphone
Camera
Lens
Plastic Washer
LThe Gasket MUST be
mounted to seal the
station!
LUse the grommets and M20 cable gland
provided for the cable holes on the backbox
LEnsure the station is
mounted vertically with the
microphone aperture facing
down.
LEnsure there is enough
clearance under the station
so that the microphone
aperture is not smothered.
LPlace the plastic washers at the
bottom of the 4 mounting holes on
the back box.
3 Flush Mounting
3.1 Flush Mount 2-Gang Double-Depth Backbox - TA-2
LIt is recommended to utilize backboxes with weep holes at the bottom.
3.2 Flush Mount Bracket - TA-5
LThe TA-5 Bracket is mandatory for flush mounting.
96 mm / 3.78?
48 mm
25 mm
23 mm
89 mm / 3.50?
89 mm / 3.50?
96 mm / 3.78?
46 mm
SIDE
SIDE
22 mm
1.81? 0.98?
0.90?
0.87?
1.89?
83 mm
87 mm
46 mm
50 mm
4 mm
4 mm
74 mm
91 mm
Fits US 2-GANG electrical boxes.
Recommended screw diameter: up to M4 (5/32")
Use screw recommended by back box manufacurer.
CUTOUT
0.16”
1.81”
0.16”
3.58”
1.97”
3.42”
3.27”
2.91”
DOC NO.
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. STENTOFON-VINGTOR products are developed and
marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.
ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is
prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend. Zenitel – All rights reserved.
3.3 Flush Mounting Procedure
4 Camera Field of View
Bracket
Gasket
Turbine Station
2
3
4
2-Gang Backbox
1
Microphone
Camera
Lens
24.8.2017
A100K11625 customer[email protected]
LThe Gasket MUST be
mounted to seal the
station!
1. Mount the 2-gang backbox into the
wall
2. Mount the bracket onto the backbox
3. Fit the gasket onto the bracket with
the ridged side facing down
–Plug the Ethernet cable into the RJ-45
port on the station
4. Mount the Turbine station onto
the bracket with the M5 fasteners
provided
90°
75 cm
192 cm
88 cm
140 cm
70°
Vertical Angle Horizontal Angle
75 cm
150 cm
LEnsure the station is mounted
vertically with the microphone
aperture facing down.
LEnsure there is enough clearance
under the station so that the
microphone aperture is not
smothered.
Otros manuales para TCIV-2
1
Este manual sirve para los siguientes modelos
5
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Vingtor Stentofon
Vingtor Stentofon
Vingtor Stentofon TCIV-2SIP Guía
Vingtor Stentofon
Vingtor Stentofon TCIS-1 Manual de usuario
Vingtor Stentofon
Vingtor Stentofon Exigo Ex EAPFX-1 Guía
Vingtor Stentofon
Vingtor Stentofon TCIS-1SIP Guía
Vingtor Stentofon
Vingtor Stentofon Turbine Mini SIP Station Guía
Vingtor Stentofon
Vingtor Stentofon Turbine Compact Analog TCAS Series Guía
Vingtor Stentofon
Vingtor Stentofon TCIS-1 Guía
Vingtor Stentofon
Vingtor Stentofon ECPIR-3P Manual de usuario
Vingtor Stentofon
Vingtor Stentofon TFIE-1 Guía
Vingtor Stentofon
Vingtor Stentofon Exigo Ex EAPFX-1 Manual de usuario
