Viking TMS-RDMA Manual de usuario

• One inch LED display indicates next line to

answer

• Generates an audible, distinctive ring for

attendants

• Adjustable ringing volume

• Wall mount bracket included

• 6-wire installation

• Up to three remote display modules can be

connected to one Viking TMS-6X or TMS-12A

Call Sequencer

• Can be installed up to 1000 feet from the call

sequencer for a variety of applications

(optional PS-2 power supply allows 2000 feet)

• Bi-directional mounting

The TMS-RDMA is designed to provide a remote

indication of the next line to answer for TMS-6X and

TMS-12A Call Sequencer users.

The TMS-RDMA generates audible ringing and

displays the line number of the oldest call waiting.

Attendants or agents can then answer calls in a

professional, timely manner.

Up to three remote displays can be used with one

Viking TMS-6X or TMS-12A Call Sequencer. The

TMS-RDMA has a one inch LED display and can be

wall mounted or placed on a desktop.

Call Se

uencer Remote Displa

Module

VIKING©

Technical Practice

Telecommunication Peripheral Products TMS-RDMA

Remote Display

Module

December 18, 1998

Features Applications

Sales...(715) 386 - 8861

Made in the U.S.A.

Power: Call sequencer powered (20V DC/18mA minimum)

Dimensions: 75mm x 130mm x 40mm (2.9” x 5” x 1.5”)

Shipping Weight: .45 kg (1 lb)

Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% non-

condensing humidity

Connections: RJ25 jack

Maximum Cable Run: 305 m (1000 ft) (610 m (2000 ft) with

optional PS-2 power supply)

Specifications

• For use with all Viking Call Sequencers,

including:

1. TMS-6X

2. TMS-12A

http://www.VikingElectronics.com

[email protected]

Printed in the U.S.A. ZF290800 Rev CFax Back Doc # 075

Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking

Electronics, its affiliates and/or subsidiaries assume no responsibility for errors and/or omissions contained in this information. Revisions of

this document or new editions of it may be issued to incorporate such changes.

Product Support Line...(715) 386-8666 Fax Back Line...(715) 386-4345

Installation/Programming

Operation

1. Determine the best wiring configuration for your application (section Cbelow).

2. Connect the 6-wire plug (RJ25) from the TMS-RDMA to the RJ25 connector marked “SQRG-12” on the back

panel of the TMS-6X.

Note: The TMS-RDMA is NOT polarity sensitive to the 6-wire connection to the TMS-6X.

A. Installing with a TMS-6X

B. Installing with a TMS-12A

1. Determine the best wiring configuration for your application (section C, below).

2. Connect the 6-wire plug (RJ25) from the TMS-RDMA to one of the following:

a. The modular RJ25 connector marked “SQRG-12/TMS-RDMA.”

b. The RJ21X punch down connector.

3. Place protocol switch 11 in the down position.

Note: The TMS-RDMA is NOT polarity sensitive to the 6-wire connection to the TMS-12A.

C. Recommended Maximum Run Length

Number of TMS-RDMA’s

Maximum Run Length

1000 feet (305 m)

400 feet (122 m)

300 feet (91 m)

Note: 2,000 foot runs are possible with optional power supply

PS-2 (Fax Back Document 510).

Important: Use 24 gauge 6-wire cord.

E. Wiring Configurations

1. Three Separate Runs

of 1000 feet 2. Three Units on the

Same Run

3. Using Optional Power Supplies

On normal incoming calls the TMS-RDMA will display the line to be answered and provide standard cadence tone burst. This ring

represents the incoming call before the call has been answered by the TMS-6X or the TMS-12A. In instances where one or more

lines have been answered by the TMS-6X or the TMS-12A, a double tone burst will sound. The digital display will then indicate the

next line to answer.

300 foot maximum

2000 foot maximum

1000 foot maximum

D. DIP Switch Settings

DIP Switch

TMS-12A

Inverted Display

Not Used

Off

TMS-6X

Normal Display

Not Used

VIKING ELECTRONICS, INC.

HUDSON, WI 54016

MUSIC

RING VOLUME

SQRG-12 L1

USE ONLY

LISTED

CLASS 2

POWER

SOURCE

12-14 VAC

TMS-6X or TMS-12A

VIKING ELECTRONICS, INC.

HUDSON, WI 54016

MUSIC

RING VOLUME

SQRG-12 L1

USE ONLY

LISTED

CLASS 2

POWER

SOURCE

12-14 VAC

TMS-6X or TMS-12A

VIKING ELECTRONICS, INC.

HUDSON, WI 54016

L4, L5, L6

MUSIC

RING VOLUME

SQRG-12 L1, L2, L3

USE ONLY

LISTED

CLASS 2

POWER

SOURCE

12-14 VAC

TMS-6X or TMS-12A

On Off

Rear View of

the TMS-RDMA

TMS-RDMA

Inverted Display

(DIP Switch 2 On)

PS-2

Power

Supply

PS-2

Power

Supply

PS-2

Power

Supply

Otros manuales de Unidad de control de Viking

Viking

Viking VXD Manual de instrucciones

Viking

Viking A-1 Manual de instrucciones

Viking

Viking SA--25 Instrucciones de uso

Viking

Viking G-3000P Manual de instrucciones

Viking

Viking G-2000 Manual de instrucciones

Viking

Viking F-1 Manual de instrucciones

Viking

Viking G-4000P Manual de instrucciones

Viking

Viking VXD Manual de instrucciones

Viking

Viking G-2000P Manual de instrucciones

Viking

Viking G-6000 Manual de instrucciones

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario