ViewSonic ViewPanel VG181 VLCDS21594-1 Manual de usuario

User Guide

Guide de l’utilisateur

Bedienungsanleitung

Manual de Instrucciones

Guida per l'utente

Guia do usuário

Användarhandbok

Polski

ViewSonic VG181

For Your Records

Write the Serial Number (see back of ViewPanel) and the Purchase Date in the

spaces below. Keep this User Guide as a permanent record of your purchase to

help with identification in the event of theft or loss.

Product Name: ViewSonic VG181

Model Number: VLCDS21594-1

Document Number: VG181_UG_227

Serial Number: __________________

Purchase Date: __________________

To meet your future needs, and to receive any additional product information as it becomes

available, please register your product on the Internet at: www.viewsonic.com. The

ViewSonic Wizard CD-ROM also provides an opportunity for you to print the registration

form, which you may then mail or fax to ViewSonic.

Product Registration

ViewSonic is concerned about the preservation of our environment. Please dispose of this

product properly at the end of its useful life. Your local waste disposal company may

provide information about proper disposal.

Product Disposal at End of Product Life

Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.

Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of

Microsoft Corporation in the United States and other countries.

ViewPanel, ViewSonic, the three birds logo, OnView, ViewMatch, OptiSync, and ViewMeter

are registered trademarks of ViewSonic Corporation.

ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA).

VESA is a registered trademark of the Video Electronics Standards Association. DPMS and

DDC are trademarks of VESA.

Disclaimer: ViewSonic®Corporation shall not be liable for technical or editorial errors or

omissions contained herein; nor for incidental or consequential damages resulting from

furnishing this material, or the performance or use this product .

In the interest of continuing product improvement, ViewSonic Corporation reserves the

right to change product specification without notice. Information in this document may

change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any

purpose without prior written permission from ViewSonic Corporation.

As an ENERGY STAR ®partner, ViewSonic Corp. has determined that this product meets the

ENERGY STAR ®guidelines for energy efficiency.

ViewSonic VG181

CONTENTS

ForYourRecords............ .......... .......... ......... 1

Getting Started

Package Contents ....................................... 3

Before using the ViewPanel®.......... ................. ... 4

Precautions............................................. 4

Important Safety Instructions ............................. 5

Quick Installation* ...... .......... .......... .......... .. 6

Installation-Wall Mount (optional)......................... 7

Using the ViewPanel

Setting the Timing Mode ................................. 8

Preset Timing Modes..................................... 8

Maximum Refresh Rates.................................. 8

Landscape/Portrait Modes ................................ 9

Raising and Lowering the Display ......................... 9

Adjusting the Screen Image.............................. 10

Other Information

Specifications ......................................... 17

Troubleshooting ....................................... 18

Customer Support ...................................... 19

Cleaning the ViewPanel ................................. 20

Warranty.............................................. 21

Appendix

Power Cord Safety Guidelines............................ 22

FCC Information ....................................... 23

CE Conformity......................................... 23

*To meet your future needs, and to receive any additional product information as it becomes available,

please register your monitor's warranty on the Internet at: http://www.viewsonic.com.

ViewSonic VG181

CongratulationsonyourpurchaseofaViewSonic VG181 colormonitor!You

have selected one of the most advanced display devices in the industry.

Features include OptiSync™technologymaking the VG181 capable of

accepting virtually any of today's analog and tomorrow's DigitalVideo

Interface(DVI)inputsources.

Also, you can easily raise and lower the display manually. The display can

operateinlandscape or portrait mode and tilts orswivelsin a desk mount or

wall mount.

NOTE: Save the original box and all packing material for future shipping

needs.

NOTE: Theword"Windows®"inthisuserguidereferstothefollowing

Microsoft®operatingsystems:Windows'95,Windows '98,WindowsNT®.

Getting Started

*IMPORTANT: ThesuppliedINF file assurescompatibilitywithWindowsoperating

systems, and the ICM file (Image Color Matching) ensures accurate on-screen

colors.ViewSonic

recommendsthatyouinstallbothfilesasshownintheQuick

Installationsection.

Package Contents

•ViewSonic

VG181

ViewPanel

•DC Power Supply (AC adapter)

The power cable connects to the

AC Adapter.Theother end of the

AC Adapter connects to the back

oftheViewPanel(theDCInport).

•Detachable video cable (15 pin

D-sub)

Required to receive Analog RGB

video signal from PC

•Power cord/USA type

Connects the wall outlet to DC

Power supply.

•Power cord/SCHUKO type for

Europe

Connects wall outlet to DC Power

supply

•Quick Start Guide

•ViewSonic Wizard CD-ROM

Includes User Guide PDF files

and INF/ICM Display Optimization

files.

•PerfectPortraitTM CD-ROM

PerfectPortraitsoftwaremustbe

installed for the ViewPanel to be

used in Portrait mode (see page

9).

ViewSonic VG181

Before Using the ViewPanel®

Precautions

•Read Precautions on this page, the Important Safety Instructions on

the next page, and Power Cord Safety Guidelines in the Appendix.

•Read Setting the Timing Mode on page 8 before you adjust the

ViewPanel. This will prevent you from making adjustments unnecessarily.

Getting Started

•Forbestviewingconditionssitat

least18"fromtheViewPanel.

•AVOIDTOUCHINGTHESCREEN

WITHYOURFINGERS.Oilsfromthe

skinaredifficult toremove.

•TheViewPanelcontainshigh-voltage

parts.Youmaysufferserious injury if

youtouchtheseparts.

•AvoidexposingtheViewPanelto

directsunlightoranotherheatsource.

TheViewPanelshouldbefacingaway

fromdirectsunlighttoreduceglare.

•Chooseawellventilatedareatoposition

yourViewPanel.Donotplaceanythingon

theViewPanelthatpreventsadequate

dissipationofheat.

•AlwayshandleyourViewPanelwith

carewhenmovingit.

•EnsuretheareaaroundtheViewPanel

iscleanandfreeofmoisture.

•Donotplaceheavyobjectsonthe

ViewPanel,videocable,orpower

cord.

•CAUTION: Ifsmoke,abnormalnoise,

orstrangeodorispresent,

immediatelyswitchtheViewPaneloff

andcallyourdealerorViewSonic.Itis

dangeroustocontinueusingthe

ViewPanelinthiscondition.

ViewSonic VG181

Important Safety Instructions

1Readtheseinstructionsthoroughly.

2Followallwarningsandinstructionsmarkedonthisproduct.

3Unplugtheproductfromthewalloutletbeforecleaning.Seethe

Cleaningthe

ViewPanel

sectioninthisguide.

4Donotusetheproductnearwater.Neverspillliquidofanykindontheproduct.

5Donotplacetheproductonanunstablecart,stand,ortable.Doingsomaycausethe

producttofall,whichcanseriouslydamageit.

6Slotsandopeningsinthecabinetareprovidedforventilation.Toensurereliable

operation,neverblocktheseventilationslotsbyplacingtheproductonabed,sofa,

rug,orsimilarsurface.Thisproductshouldneverbeplacednearoroveraradiatoror

heatregister;orinstalledinanyenclosurethatpreventsproperventilation.

7Makesurethepowersource complieswiththepowerrecommendationprintedonthe

backoftheproduct.Ifyouarenotsureofthetypeofpowerprovidedbythewall

socket,consultyourdealerorlocalpowercompany.

8Donotplaceanyobjectonthepowercord.Donotplacethisproductwherepeople

couldwalkonthepowercord.

9Ifyouuseanextensioncordwiththisproduct,makesurethetotalampereratingofthe

product(s)pluggedintotheextensioncorddoesnotexceedtheampereratingofthe

extensioncord.

10 Neverpushobjectsofanykindthroughtheventilationslotsatthebackofthe

product.Todosocouldriskfireorelectricshock.

11 Donotattempttoservicethisproductyourself.Openingorremovingcoversmay

exposeyoutodangerousvoltagethatcouldcausefireorelectricshock.Referall

servicingneedstoauthorizedservicepersonnel.

12 Unplugthisproductfromthewalloutletandcontactauthorizedservicepersonnel

underthefollowingconditions:

a) Whenthepowercordorplugisdamagedorfrayed.

b) Ifaliquidhasbeenspilledintoorontheproduct,includingrain.

c) Iftheproductdoesnotoperatenormallywhenoperatinginstructionsarefollowed.

Onlyadjustthosecontrolsthatarecoveredbytheoperatinginstructions,since

improperadjustmentofothercontrolsmayresultindamageandwilloftenrequire

extensiveworkbyaqualifiedtechniciantorestoretheproducttonormal

operation.

d) Iftheproducthasbeendroppedorthecabinethasbeendamaged.

e) Iftheproductexhibitsadistinctchangeinperformance,indicatinganeedfor

service.

GettingStarted

ViewSonic VG181

1 Connect video cable

Make surethat boththeViewPanel®and

the computer are powered OFF.

Connect the video cable from the back

of your computer to the analog and/or

the DigitalVideo Interface (DVI) inputs

on the back of the display depending on

the signal of your computer(s). If you

havehavebothanalogand digital

inputs, see Using theViewPanel in this

guide to toggle between the two ports.

Macintosh

users:

Connect a

Macintosh adapter (part No.VMAC-1)

tothevideocable,then totheViewPanel.

To order an adapter for older Macintosh

systems send an email to:

[email protected], or call

ViewSonic®customer service (see the

Customer Support section of this guide).

You will need to provide your

ViewPanel's serial number.

2 Connect AC/DC adapter and

power cord

Connect the power cord to a properly

grounded AC (i.e., wall) outlet, then to

the AC/DC adapter and to the

ViewPanel as shown below.

3 Power-ON ViewPanel and

computer

Power-ON theViewPanel, THEN power-

ON the computer.

Installation is complete!

Enjoy your new ViewPanel!

To be bestprepared foranyfuture customer

service needs:

•Writetheserial number(see backofthe

ViewPanel)in

"ForyourRecords"

onpage1

ofthisguide.

•Register the product on the Internetat:

www.viewsonic.com

NOTE:At this point Windows®

98 users

may receive a message asking them to

installtheVG181’sINFfile.

4 Install Display Optimization files

(INF and ICM files)

(1) Insert the ViewSonic Wizard CD-

ROM into your computer’s CD-ROM

drive.

NOTE: If your computer does not have

a CD-ROM drive, see Customer

Supportinthis manual.

(2) Wait for the CD-ROM to auto-start.

NOTE: If the CD-ROM does not auto-

start: double-click on the CD-ROM icon

in Windows Explorer, then double-click

on install.exe.

(3) Follow the on-screen instructions.

5Windows users: Setting the Timing

Mode

See page 8 for procedures to set the

timingmode.

Quick Installation

Availableoptions:wallmount(contactViewSonicoryourdealer),turnthedisplayfrom

LandscapetoPortraitmode(seeUsingtheViewPanelsection),raiseorlowerthedisplay

upordown(seethenextpage).However,ifyoujustwantthequickestandeasiestway

togetconnected,followtheQuickInstallationinstructionsbelow.

DCINport

(SmallDCpowercord) AnalogInput

Port DVIInputPort

(auto-detects)

DCPowerSupply

(ACAdapter) Videocablefromyourcomputertothe

ViewPanelVideo1and/orVideo2InputPorts

outlet

ViewSonic VG181

Installation-Wall Mount (optional)

To get a wall mounting kit, contactViewSonic®or your local dealer. TheVG181 is

compatible with the VESA wall mounting standards. To convert the desk-mounted

VG181 to a wall-mount installation, do the following:

1 Disconnect DC power.

Makesurethepoweristurnedoff

andthendisconnecttheDCpower

cordfromthebackofthe

ViewPanel.

2 Lie the ViewPanel face

down on a flat surface.

Besurenothingsharpcanscratch

orpuncturetheLCDsurface(the

faceoftheViewPanel).

3 Pull the square-like cover

from the back of the

ViewPanel.

Theplasticcovershouldhang

overthebackoftheneckofthe

ViewPaneltoexposethefour

screwstothewallmount.

4 Remove the four screws to

disconnect the base from

the back of the ViewPanel.

Storethebaseinasafeplace.

5 Attach the ViewPanel to the

wall mounting kit.

Followtheinstructionsthatcome

withthewallmountingkit.

UsingtheViewPanel

ViewSonic VG181

Using the ViewPanel

Setting theTiming Mode

The timing mode consists of the resolution and refresh rate (vertical

frequency). After setting the timing mode, use the ViewSonic OnView®

controls in this section to make adjustments. The recommended timing mode

for this ViewPanel is: 1280 x 1024 @ 60Hz.

To set the Timing Mode:

1Set the resolution: Right-click on the Windows®desktop > Properties

> Settings > Desktop Area > set the resolution (example 1280 x 1024

@ 60Hz).

2Set the refresh rate: See your graphic card's user guide for instructions.

NOTE: To minimize the adjustments required for an optimal screen

image, select a timing mode from the Preset Timing Modes table

below.

3For best image quality, activate AUTO TUNE from the IMAGE ADJUST

menu.

4If necessary, make small adjustments using H POSITION and

VPOSITION (Horizontal Position and Vertical Position) from the

IMAGE ADJUST menu until the screen image is completely visible.

(The black border around the edge of the screen should barely "touch"

the illuminated "active area" of the ViewPanel.)

WARNING: Do NOT set the graphics card in your computer to exceed the

maximum refresh rate for each resolution shown below in the Maximum Refresh

Rates table. Doing so may result in permanent damage to your ViewPanel.

Preset Timing Modes

VGA640x350@70Hz

VGA640x400@70Hz

VESA640 x480@75Hz

VESA800 x600@75Hz

Maximum Refresh Rates

1280x1024@75Hz

1024x 768 NI@ 75Hz

(NI= Non Interlaced)

800x 600NI @ 75Hz

640x 480NI @75 Hz

VESA1024x768@75Hz

VESA1280x1024@60Hz&75Hz

Macintosh®640 x 480 @ 67Hz

ViewSonic VG181

UsingtheViewPanel

Landscape/Portrait Modes*

The VP181 ViewPanel®can operate in either Landscape or Portrait mode

(see below).

To switch from Landscape (default) to Portrait modes, do the following:

(1) Face the front of ViewPanel. (2) Pull the bottom of the ViewPanel

toward you to tilt the bottom away from the base. (3) After tilting the

ViewPanel, manually rotate the VP181 clockwise 90°.

To switch from Portrait to Landscape mode, follow steps 1 - 3 above, but

manually rotate the VP181 panel counter-clockwise 90°.

*PerfectPortrait software is compatible with most PCI and AGP graphics

(video) cards. For information on compatible graphics cards and approved

hardware configurations, go to the ViewSonic website, http://

www.viewsonic.com, and select the following path: Customer support >

Support options > Document area > PPCHART.XLS. The PPCHART.XLS

spreadsheet will provide information on compatibility with your graphics

card.

To Raise and Lower the display

You can easily raise and lower the display panel (the head) manually. As

you face the front of the display, take hold of each side of the head and pull

upward or down to meet your personal preference.

Landscape Portrait

Raisethe

display Lowerthe

display

NOTE: Before using the

portrait display mode,

first install the

PerfectPortraitTM* software

included with your

VG181

ViewPanel.

Follow the instructions

that accompany the

PerfectPortrait software.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de ViewSonic

ViewSonic

ViewSonic VS14758 Manual de usuario

ViewSonic

ViewSonic VX2270Smh-LED Manual de usuario

ViewSonic

ViewSonic P90F Manual de usuario

ViewSonic

ViewSonic VG930M - 19" LCD Monitor Manual de usuario

ViewSonic

ViewSonic VA2757-2K-HD Manual de usuario

ViewSonic

ViewSonic VG2448 Manual de usuario

ViewSonic

ViewSonic VA2419-sh Manual de usuario

ViewSonic

ViewSonic VA1947a-LED Manual de usuario

ViewSonic

ViewSonic CDE12 Manual de usuario

ViewSonic

ViewSonic ViewPanel VG150 Manual de usuario

ViewSonic

ViewSonic VG2439smh Manual de usuario

ViewSonic

ViewSonic VA2709U-4K Manual de usuario

ViewSonic

ViewSonic VSD224 Manual de usuario

ViewSonic

ViewSonic VX1935wm-1 Instrucciones de construcción

ViewSonic

ViewSonic IFP6530 Manual de usuario

ViewSonic

ViewSonic VX2245wm - 22" Widescreen LCD Monitor Manual de usuario

ViewSonic

ViewSonic VX750 Manual del sistema

ViewSonic

ViewSonic CDP5560-L Manual de usuario

ViewSonic

ViewSonic VA926 - 19" LCD Monitor Guía de inicio rápido

ViewSonic

ViewSonic VLCDS27955-1W Manual de usuario

ViewSonic

ViewSonic VA2213wm Manual de usuario

ViewSonic

ViewSonic VX2433WM - 23.6" LCD Monitor Manual de usuario

ViewSonic

ViewSonic PD1910 Manual de usuario

ViewSonic

ViewSonic UltraBrite A90f+ Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación