Videsur VSP24W-25L Manual de usuario
NO：VSP24W-25L
2.4GHzWireless Mobile AV receiver
MPEG-4 Recorder
User Manual
Caution
This product is controlled by microprocessor;
improper use may cause the machine stop operating.
Please stop and restart the machine
If battery is not fully charged, this may cause serious
system error when recording and transferring video
files
Do not open the cover！
2
It may cause electrical shock。
Touch DC converter parts may cause electrical shock
In order to prevent improper operation of DC converter, please read User Manual carefully.
Caution
Prevent this product from water and liquid, Otherwise, electrical shock and fire danger may occur
For your safety, pleases use only the DC converter provided.
（The manufacturer will not responsible for any losses caused by DC converter not provided by
the manufacturer）
Important
Please only use the socket match with DC converter. Use of improper socket may cause
electrical and fire damager
Please firmly plug the DC converter into the AC socket panel
3
SafetyNotice
Internalrechargeablebattery
λDo not use damaged battery or charger
λDo not charge battery over the specified time period
λFirst use or the battery has not been used for past several month, please recharge the battery
before use.
In order to protect your battery, please fully charge your battery before you use. The battery
must be fully discharge it before you charge it again.
λOver charge and over discharge will shorten the life of battery
λIf the usage period of fully charged battery is shorten than new battery, You need to change
your battery.。
λBattery is consumable item, its life will be shorten from the time it is being used.。
λ
Don’t touch the DC converter with any conductors e.g. rings etc..
ProductPackages
★
Any changes of the above items in the packages will not inform in advance.
Please recycle and re-use above item as far as possible。
4
MainParts
Mainmachine
5
Connect to AC socket（Charge battery purpose）
Before use this product, please use the provided DC adapter for charging purpose.
Please connect DC adapter plug into DC 5V socket
Please firmly plug in the DC into the AC socket
The battery life indicator will turn to Red when it is charging
The light will turn to green when is fully charged.
λBefore use this product, please charge the battery for 4 hours in order to fully charge the battery.
λCharge period ≥4hours （after fully discharge）
Important notice
During recording video or transferring files, system error may occur in case of inadequate battery.
Therefore, please check battery level before use this product. If needed, please connect to DC adapter
and fully charge the battery before use.
6
Mode selection
Press to power on
Wireless receiving mode
■Use wireless receiving mode to receive video signal
1. Push receiving mode key to R (Wireless receiver)Mode, Receiver screen will display
Wireless video recorder, Press Key. Select your desired channel
CH1: 2414MHz; CH2: 2432MHz; CH3: 2450MHz; CH4: 2468MHz.
2. Press REC Key to record the video and audio media. After recording, the file will be
Kept at following file folder: multimedia menu\DCIM\100COACH
3. Press recording REC button, to stop recording.
λAfter recording , the file will be kept at file folder : Multimedia
menu\DCIM\100COACH。
λThe file will be named as PICT001，PICT002 as MPEG file in AVI format.。
λIt is unable to reset volume during recording。
λIf memory is full, recording will stop。
7
Selectusemode
Multimediaplayermode
■Use multimedia player file
1. Turn the receiver mode to “P” mode, the machine will display the the Main menu of the Multimedia
mode. Enter into the multimedia explorer, there are four file folders (MP3,VIDEO,DCIM,PHOTO）
2. Press /Key to select function menu, Press to enter the function menu.
3. /：move up and down to select file folder, Press : to access the file.
+/– ：move to the selected file ，Press : to play the file, Press ■stop play/back
to previous file。
4. During play mode, use +/– to adjust voice volume
5.when play a file completed，it will play next file
8
Connecttoexternalequipment
Use AV Cord to connect to external equipment
9
■check video/audio/voice through TV
1. Connect AV connector to AV OUT plug of the product, connect 3RCAplug connect to TV set(Yellow:
Video; White: Audio(L); Red : Audio (R)
2. Turn TV to AV mode (external input), to receive signal from wireless receiver.
Monitor will display operating instruction.
How to view video file, please refer to P.13 for details
■Use wire cord to record AV file
1. Connect AV cord to AV IN plug of this product, connect 3RCAplug connect to TV set
(Yellow: Video; White: Audio (L); Red: Audio (R)
2. Turn receiver mode to P (multimedia receiver) mode, select recording function to record video from
external equipment.
3. Resolution setting Turn receiver mode to P (multimedia receiver) mode, select recording menu, press
MENU Key to enter Into Resolution, AV Quality sub-menu. Press+/Key to select he function you
intended to set. Press Key enter into function menu, Press +/– key to select setting, Press
MENU key to select either 320×240”or“640×480”resolution，Factory default is “640×480”
Connect to external equipment
Use USB connect to external USB equipment
■ This product support OTG function, it can link with U disk or
removable hard disk for accessing and storage.
■ Delect and Copy function：
If SD card is inserted, System will set default to SD card, if no SD card is or insert the SD card after the
product is power on, the default memory card need to set in the memory. When select copy a file, you
need to set memory in the menu in advance. In player mode but have only one “memory”. It cannot
precede copy process.
1. When memory is set to memory, enter into multimedia player will have four options
(MP3,VIDEO,DCIM,PHOTO）. When memory is set to U disk, enter into multimedia player will
display is the menu of main memory.
2. Enter into multimedia player, select the file or play option. Press MENU key will display “delete, copy
to” operation, select /key to select your intended option.
3. Turn to “copy to” option, press to enter, will display “memory” “main memory” or “U disk” three
option. Select. +/–appropriate memory，Press Key to complete copy process. The memories are able
to proceed copy each others.
4．Press Key to display” all, present and cancel” three options. Press +/– key to select you option, press
Key, it will display “Yes” or “No” options. Select “Yes” to delete, “No” to exist delete operating.
10
Tabla de contenidos
