Videology 24C708AF Manual de usuario
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 1 of 30
Prior to Using This Document: Videology reserves the right to modify the information in this
document as necessary and without notice. It is the user’s responsibility to be certain they possess the
most recent version of this document by going to www.videologyinc.com, searching for the model
number, and comparing revision letters on the respective document, located in the document’s footer.
For technical assistance with this product, please contact the supplier from whom the product was
purchased.
Videology Imaging Solutions, Inc. USA
Videology Imaging Solutions, B.V. Europe
37M Lark Industrial Parkway
Greenville, RI 02828
Tel: 401-949-5332
Fax: 401-949-5276
www.videologyinc.com
Neutronenlaan 4
NL-5405 NH Uden, Netherlands
Tel: +31 (0) 413-256261
Fax: +31 (0) 413-251712
www.videology.nl
5MP Camera with Flash
Instruction Manual
24C708AF
SFT-15003 Rev 2.1.0.0
Preliminary
IMAGING SOLUTIONS INC.
Original Equipment Manufacturer
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 2 of 30
License Agreement (Software):
This Agreement states the terms and conditions upon which Videology Imaging Solutions, Inc. USA and
Videology Imaging Solutions, B.V. Europe (hereafter referred to as "Videology®") offer to license to you the
software together with all related documentation and accompanying items including, but not limited to,
the executable programs, drivers, libraries, and data files associated with such software.
The Software is licensed, not sold, to you for use only under the terms of this Agreement.
Videology grants to you, the purchaser, the right to use all or a portion of this Software provided that the
Software is used only in conjunction with Videology's family of products.
In using the Software you agree not to:
Decompile, disassemble, reverse engineer, or otherwise attempt to derive the source code for any
Product (except to the extent applicable laws specifically prohibit such restriction);
Remove or obscure any trademark or copyright notices.
Limited Warranty (Hardware and Software):
ANY USE OF THE SOFTWARE OR HARDWARE IS AT YOUR OWN RISK. THE SOFTWARE IS PROVIDED FOR
USE ONLY WITH VIDEOLOGY'S HARDWARE. THE SOFTWARE IS PROVIDED FOR USE "AS IS" WITHOUT
WARRANTY OF ANY KIND, TO THE MAXIMUM EXTENT PERMITTED BY LAW, VIDEOLOGY DISCLAIMS ALL
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, QUALITY AND FITNESS FOR A PARTICULAR
APPLICATION OR PURPOSE. VIDEOLOGY IS NOT OBLIGATED TO PROVIDE ANY UPDATES OR UPGRADES
TO THE SOFTWARE OR ANY RELATED HARDWARE.
Limited Liability (Hardware and Software):
In no event shall Videology or its Licensor's be liable for any damages whatsoever (including, without
limitation, incidental, direct, indirect, special or consequential damages, damages for loss of business
profits, business interruption, loss of business information, or other pecuniary loss) arising out of the use
or inability to use this Software or related Hardware, including, but not limited to, any of Videology's
family of products.
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 3 of 30
Table of Contents
1. Document History....................................................................................................................4
2. About the Camera ...................................................................................................................4
3. Specifications..........................................................................................................................4
3.1. Flash Support ...................................................................................................................5
3.2. Still Image Capture ...........................................................................................................5
3.3. Camera / Flash .................................................................................................................5
4. Viewer Installation...................................................................................................................6
5. VIS Viewer ...........................................................................................................................10
5.1. Devices ......................................................................................................................... 10
5.2. Options.......................................................................................................................... 12
5.2.1. Video Renderer ........................................................................................................12
5.2.2. Quality.................................................................................................................... 13
5.2.3. Direct Draw ............................................................................................................. 13
5.2.4. Performance ............................................................................................................ 14
5.3. Video Capture Filter ........................................................................................................ 15
5.3.1. Video Proc. Amp ...................................................................................................... 15
5.4. Video Capture Pin ........................................................................................................... 16
5.4.1. Stream Format ........................................................................................................ 16
5.5. Still Capture Pin.............................................................................................................. 17
5.6. Current Settings ............................................................................................................. 18
5.7. Capture ......................................................................................................................... 19
5.7.1. Get Still (Enter) ....................................................................................................... 19
5.7.2. Still File Path ........................................................................................................... 19
5.8. Focus ............................................................................................................................ 21
5.8.1. Trigger AutoFocus .................................................................................................... 21
5.9. UVC Extension ................................................................................................................ 22
5.9.1. AF Status ................................................................................................................ 22
5.9.2. AF Trigger ............................................................................................................... 23
5.9.3. Flash Control ........................................................................................................... 24
5.9.4. Debug Control ......................................................................................................... 24
5.10. Help...........................................................................................................................26
6. TWAIN Installation.................................................................................................................27
7. Using the TWAIN Interface ..................................................................................................... 28
7.1. ZOOM FEATURE ..............................................................................................................28
7.2. Mode of operation ........................................................................................................... 28
7.2.1. Preview mode ..........................................................................................................28
8. Contact Information............................................................................................................... 30
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 4 of 30
1. Document History
2. About the Camera
The 24C7085AF is a UVC compliant, robust, high resolution (up to 5 MP), USB, and autofocus camera
ideally suited to Photo ID Badging applications.
The camera (and flash unit) are powered directly from the USB port of the computer and no external
power supply is required.
The camera supports both raw and compressed video output.
3. Specifications
Image Sensor Size
1/4"
Video Output
USB 2.0
Compression
MJPEG / JPEG
Data Format
YUV 422
Resolution / Frame rate
Resolution
Frame Rate
2592x1944
2.5
2048x1536
2.5
1920x1080
5
1600x1200
5
1280x720
7.5
1024x768
10
800 x 600
15
640x 480
30
352x288
30
320x240
30
Image Control Functions
Exposure
Auto/ Manual
Focus
Auto (push to Focus)/ Manual
White Balance
Auto/ Manual
Brightness
via UVC Interface
Contrast
via UVC Interface
Hue
via UVC Interface
Saturation
via UVC Interface
Backlight Compensation
via UVC Interface
Power Requirements
Supply Voltage
5V DC (VIA USB)
Power Consumption
<500mA
Revision
Issue Date
Reason
CN#
07-01-2013
Initial release
15-0003
B
06-30-2016
Software revision 2.1.0.0, updated manual (all
sections) and added TWAIN instructions
16-0081
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 5 of 30
3.1. Flash Support
The camera supports one or two Videology LED Flash units.
The flash units are powered from the USB camera
3.2. Still Image Capture
The camera supports a single image "snapshot" mode with optional JPEG compression.
The resolution of the still image is user definable.
3.3. Camera / Flash
The camera is fully UVC compliant and all basic camera controls can be accessed via the standard UVC
command protocol.
The 24C708AF camera, includes an internal processor that automatically detects when a snapshot
command has been issued, and triggers the flash at the appropriate time.
Some applications however do not issue a snapshot command to the camera, and in this case, the
application needs to be modified to include the necessary flash control commands.
The full capabilities of the camera can be demonstrated using the simple viewer application provided.
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 6 of 30
4. Viewer Installation
The 24C708AF is shipped with a simple demonstration viewer application that can be installed by running
the "setup.msi" file found in the accompanying CD.
If the camera is to be used with a third party application, there is no need to install the Videology
software.
Insert CD into PC. If the disc does not autorun, open folder and double click setup.msi to start the
install process.
Select “Next”.
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 7 of 30
Pick the file directory you would like to install Videology software.
The default folder is C:\Program Files (x86)\Videology\CameraViewer\
You also have an option to install for everyone or just the user currently logged in.
Choose Everyone and click “Next”
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 8 of 30
Select “Next” to continue. Another progress window will show status of install.
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 9 of 30
If a User Account Control” pop up is displayed, Click “Yes” to allow changes.
Once complete, a window will display that the 5MP Camera Viewer has sucessfully been installed.
Select “Close” to finalize the installation.
The USB camera can now be connected to the camera.
Doc # INS-SFT-15003
Issue Date: 08/12/2016
Revision: B
Page 10 of 30
5. VIS Viewer
Plug in the camera (24C708AF) via USB cable , then open the viewer.
To open the viewer, Go to Start >> All Programs >> Videology >> Camera Viewer. You should now see a
window like below.
The features that are supported in the current version of installer are briefly described here.
In the viewer’s status bar the current resolution of video stream and the frame rate are displayed.
5.1. Devices
When user clicks on Devices menu all the video devices connected to the PC will be enumerated and
listed. A check mark will be placed alongside the camera whose images are being displayed in the window.
Otros manuales para 24C708AF
1
Tabla de contenidos
Otros manuales de Cámara digital de Videology
Videology
Videology 20D436 Manual de usuario
Videology
Videology 20E20X Manual de usuario
Videology
Videology 20C20XW Manual de usuario
Videology
Videology 24Z2.1W-10X-EXSDI Manual de usuario
Videology
Videology 20C40xW Manual de usuario
Videology
Videology 20Z704 USB Instrucciones de instalación y funcionamiento
Videology
Videology 24C708AF Manual de usuario
Videology
Videology SFT-10002 Manual de usuario
Videology
Videology 20E709TDN3 Manual de instalación
Videology
Videology M14 Board Manual de usuario
