Victorinox ST-4000 CHRONO Manual de usuario

ST 4000 Analog/Digital Chronograph ........................................ 2

Speciﬁcations ................................................................................. 42

Battery .............................................................................................. 44

ST 4000 Cronografo analogico/digitale .................................... 45

Speciﬁche tecniche ....................................................................... 88

Pila .................................................................................................... 90

Cronografo ST 4000 Analógico/Digital ..................................... 91

Especiﬁcaciones .......................................................................... 132

Pila .................................................................................................. 134

ENGLISH

ITALIANOESPAÑOL

ST 4000 Cronógrafo Analógico/Digital ................................... 135

Especiﬁcações .............................................................................. 177

Pilha ............................................................................................... 180

PORTUGUÊS

SETTING THE ANALOG TIME (HANDS)

A. Pull out the crown and turn it until the desired time.

B. Push back the crown to its normal position.

Note: Never operate when the watch is wet.

DIGITAL DISPLAY CONTROLS

Functions Formats

1A. Clock .................................... 12 or 24 hour

B. Calendar............................. US or European

C. Alarm................................... On or Off

D. Stopwatch ........................... On or Off / Splits and Times

2A. Altitude................................ Feet or Meters

B. Sea Level Barometer ........ Inches of Mercury or Millibars

C. Thermometer...................... Fahrenheit or Celsius

3A. Vertical Feet Ascended.... Feet or Meters

B. Maximum Altitude ............ Feet or Meters

C. Vertical Feet Descended.. Feet or Meters

D. Runs ..................................... Feet or Meters

ST 4000

Function Buttons Setup Buttons

1Clock

function

2Altimeter

function

3Sport

function

Start/Stop Button

Crown

Adjust Button

FUNCTION FLOW

1. Pressing the Clock Button

A. Displays the Clock (ﬁrst press)

B. Displays the Calendar (second press)

C. Displays the Alarm (third press)

D. Displays the Stopwatch (fourth press)

2. Pressing the Altimeter Button

A. Displays the Altimeter (ﬁrst press)

B. Displays the Barometer (second press)

C. Displays the Thermometer (third press)

3. Pressing the Sport Function Button

A. Displays Accumulated Vertical Ascent (ﬁrst press)

B. Displays Maximum Altitude (second press)

C. Displays Accumulated Vertical Descent (third press)

D. Displays Ski Runs (fourth press)

SETUP

Pressing the Start/Stop Button

1. Adjusts the blinking digit (if an arrow at the left of

the display is toggling, it adjusts in the arrow

direction).

2. Toggles between formats in the format selection

mode.

Pressing the Start/Stop Button

Starts and stops the Stopwatch when the Stopwatch

is displayed.

Holding the Start/Stop Button

Makes a global change of formats (all English or all

metric) in the Clock format selection mode.

Pressing the Adjust Button

Resets the Stopwatch when the Stopwatch is dis-

played.

S/S

Pressing the Adjust Button

1. Enters the setup mode of the function displayed.

2. Moves from one setup step to the next and exits setup after com-

pletion.

Holding the Adjust Button 1 second

1. Enters the format selection mode.

ADJ

6 7

SETUP STEP-BY-STEP

Clock Setup

Step 1 Clock Function.

Press the Clock Button to display the Clock.

Step 2 Hours Blink.

Press the Adjust Button – the hour digits blink.

Step 3 Advance Hours.

Press the Start/Stop Button to advance the hours.

Step 4 Minutes Blink.

Press the Adjust Button – the hour is set and the

minute digits blink.

SETUP STEP-BY-STEP

Clock Setup (con’t.)

Step 5 Advance minutes.

Press the Start/Stop Button to advance the minutes.

Step 6 Seconds Blink.

Press the Adjust Button – the minute is set and the

second digits blink.

Step 7 Advance Seconds.

Press the Start/Stop Button to advance the seconds.

Step 8 Exit Setup.

Press the Adjust Button – the seconds are set and

setup mode exited.

8 9

ADJ

S/S

ADJ

S/S

ADJ

S/S

ADJ

SETUP STEP-BY-STEP

Calendar Setup

Step 1 Calendar Function.

Press the Clock Button to display the Calendar.

Step 2 Months Blink.

Press the Adjust Button – the month digits blink.

Step 3 Advance Months.

Press the Start/Stop Button to advance the

months.

Step 4 Days Blink.

Press the Adjust Button – the month is set and

the day digits blink.

SETUP STEP-BY-STEP

Calendar Setup (con’t.)

Step 5 Advance days.

Press the Start/Stop Button to advance the days.

Step 6 Year blinks.

Press the Adjust Button – the day is set and the

year digits blink.

Step 7 Advance years.

Press the Start/Stop Button to advance the

years.

Step 8 Exit Setup.

Press the Adjust Button – the year is set and

setup mode exited.

10 11

ADJ

S/S

ADJ

S/S

ADJ

S/S

ADJ

12 13

SETUP STEP-BY-STEP

Activating the Alarm and Setting Alarm Time (con’t.)

Step 5 Advance Hours.

Press the Start/Stop Button to advance the hour.

Step 6 Blink Minutes.

Press the Adjust Button – the hour is set and the

minutes blink.

Step 7 Advance Minutes.

Press the Start/Stop Button to advance the min-

utes.

Step 8 Exit Setup.

Press the Adjust Button to exit. The Alarm icon

indicates the alarm is on.

SETUP STEP-BY-STEP

Activating the Alarm and Setting Alarm Time

Step 1 Alarm Function.

Press the Clock Button to display the Alarm.

Step 2 On/Off.

Press the Adjust Button – ”on” or “off” blinks.

Step 3 Activate Alarm. Press the Start/Stop Button

to toggle between on and off. You can only set the

alarm time when the Alarm is on.

Step 4 Blink Hours. Press the Adjust Button – go to

the alarm-set display – the Alarm hour digits blink.

ADJ

S/S

ADJ

S/S

ADJ

S/S

ADJ

14 15

SETUP STEP-BY-STEP

Selecting the Clock and Calendar Formats (con’t.)

Step 5 Calendar Function.

Press the Clock Button to display the Calendar.

Step 6 Selection Mode.

Hold the Adjust Button 1 second – the date in the

current calendar format blinks.

Step 7 Change Calendar Format.

Press the Start/Stop Button to toggle between

month/day/year and day/month/year.

Step 8 Exit Calendar Format.

Press the Adjust Button when the desired format is

displayed to exit.

SETUP STEP-BY-STEP

Selecting the Clock and Calendar Formats

Step 1 Clock Function.

Press the Clock Button to display the Clock.

Step 2 Selection Mode.

Hold the Adjust Button 1 second – the current

clock format is shown (12 or 24).

Note: When the 12-hour format is used, the letter

«P» will appear on the left side of the display to

indicate PM.

Step 3 Change Clock Format.

Press the Start/Stop Button to toggle between 12

and 24 hours.

Step 4 Exit Clock Format.

Press the Adjust Button when the desired format is

displayed.

ADJ

S/S

ADJ

S/S

ADJ

USING THE ST 4000 ALTIMETER AND BAROMETER

Altitude. The ST 4000 shows altitude below or above sea level from

-4,000 feet to +30,000 feet in 5-foot increments.

How the Altimeter Works. The ST 4000 measures altitude by detect-

ing differences in air pressure and displaying this information as

altitude above sea level. The ST 4000 works the same way an

aircraft altimeter does.

Barometer. There are two kinds of barometers: ﬁxed location and

moving location. Moving barometers are designed to be used at

varying elevations. The ST 4000, like an aircraft altimeter, contains a

moving location barometer. Its reading does not move until you set

it by adjusting the altitude in the altimeter display.

Altitude Offset. A weather change will produce a change in baro-

metric pressure that causes an offset in the displayed altitude from

the actual altitude. This offset is consistent at any altitude, so, if you

start a hike with the altitude reading 50 feet too high, it will read 50

feet too high at any elevation on your hike. You remove the offset by

adjusting the altitude.

When to Adjust Altitude. Adjust the altitude when you want precise

altitude readings, such as before hiking or climbing, or when you

want to update the Sea Level Barometer. Adjust at a known altitude

such as at the sea side, a marked summit or pass, or a location with

an altitude reference on a map such as a lake. Home or ofﬁce make

convenient adjustment points after learning their elevations from a

topographic map.

Adjust once a day when hiking, climbing, or when following weath-

er patterns. You can also adjust altitude in the barometer by enter-

ing a current, local barometer reading from a weather report or

airport weather service. When you enter the barometer reading, the

altitude is also adjusted in the altimeter.

Note: The analog and digital movements of this watch operate inden-

pendantly. Please set each individually to ensure they are kept in sync.

16 17

ALTIMETER AND BAROMETER DETAILS

Effects of Atmospheric Pressure Changes. A change in atmos-

pheric pressure will make the displayed altitude different from the

known altitude of a landmark. The ST 4000 can be adjusted so that

it displays the same altitude as the landmark. Minor atmospheric

pressure changes may cause the displayed altitude to vary from the

actual altitude by 50 feet. With the arrival or departure of a weather

front, displayed altitude can change 100 to 200 feet, and a storm can

cause a change of more than 200 feet. Wind, rain, snow, and humidity

do not affect altimeter readings.

Barometer-Altimeter Synchronization. Synchronization (the relation

between altitude and sea level barometer) is set at the factory. To

ensure barometer accuracy you can check it after a year or two and

correct minor drift if necessary. You must know your current altitude

and must get the current sea level barometer from a local airport or

weather broadcast to make this adjustment.

You can also synchronize the thermometer if it reads consistently

high or low over a range of temperatures.

Thermometer Accuracy. The ST 4000 measures the ambient air tem-

perature with a sensor inside its case. When the watch is worn

against your skin, temperature readings will be affected signiﬁcant-

ly. Direct sunlight can also cause the ST 4000 to give high readings.

For accurate readings, remove the watch from your wrist and place

away from direct sunlight.

Display. The Altimeter and Thermometer revert to the Clock 10 minutes

after the last time a button is pressed.

Otros manuales para ST-4000 CHRONO

Tabla de contenidos

Otros manuales de Mirar de Victorinox

Victorinox

Victorinox AIRBOSS MATCH 1 Manual de usuario

Victorinox

Victorinox POCKET WATCH Manual de usuario

Victorinox

Victorinox 24003 Guía de instalación

Victorinox

Victorinox CHRONO CLASSIC XLS ALARM Manual de usuario

Victorinox

Victorinox ST 5000 Manual de usuario

Victorinox

Victorinox HUNTER MACH 3 Manual de usuario

Victorinox

Victorinox CHRONO CLASSIC XLS ALARM Manual de usuario

Victorinox

Victorinox Night Vision II Especificaciones técnicas

Victorinox

Victorinox AirBoss Mach 6 Manual de servicio

Victorinox

Victorinox SWISS ARMY on RONDA 515.24H Manual de usuario

Victorinox

Victorinox Ronda 5030.D Manual de usuario

Victorinox

Victorinox I.N.O.X. Manual de usuario

Victorinox

Victorinox NIGHT VISION CHRONOGRAPH Manual de usuario

Victorinox

Victorinox ETA 251.274 Manual de usuario

Victorinox

Victorinox STARTECH ST-4000 Manual de usuario

Victorinox

Victorinox ALLIANCE MOONPHASE Manual de usuario

Victorinox

Victorinox chrono classis 1/100 Manual de usuario

Victorinox

Victorinox ALLIANCE CHRONOGRAPH Manual de usuario

Victorinox

Victorinox MECHANICAL WATCH Manual de usuario

Victorinox

Victorinox I.N.O.X. Manual de usuario

Victorinox

Victorinox ST-5000 DIGITAL COMPASS Manual de usuario

Victorinox

Victorinox Dive Master 500M Manual de usuario

Victorinox

Victorinox SWISS AIR FORCE Manual de usuario

Victorinox

Victorinox Air Boss 24833 Manual de usuario

Manuales populares de Mirar de otras marcas

Pandora

Pandora WATCH2 Manual de usuario

Casio

Casio QW-4343 Manual de usuario

Suunto

Suunto X6 Manual de usuario

Seiko

Seiko N830 Manual de usuario

MotionX

MotionX 365 Manual de usuario

Garmin

Garmin VENU SQ 2 Manual de usuario

QCY

QCY Watch GTC Manual de usuario

Canyon

Canyon Cindy CNE-KW41WP Manual de usuario

Esq

Esq Watches Guía de instalación

Crane

Crane AA5-CDSM-3A Manual de usuario

Timex

Timex W-214 Manual de usuario

DETOMASO

DETOMASO MATERA Manual de usuario

Geemarc

Geemarc Watch N Shake Manual de usuario

LORUS

LORUS W590 Manual de usuario

STENLILLE

STENLILLE Actío Manual de usuario

Casio

Casio 5594 Manual de usuario

Sinn

Sinn HUNTER'S WATCH 3. Edition Manual de usuario

Slazenger

Slazenger SLZ800 Manual de usuario