Victoria Arduino Athena Leva Manual de usuario

Compliments, you have chosen a machine that's unique in its kind.

Read carefully what is advised in the manual to "prepare" your “Athena Leva”. You

will realise how easy it is to make excellent coffees and creamy cappuccinos. As time

will pass you will also realise how little maintenance it needs.

Victoria Arduino

ATHENALEVA

02_Athena_Leva_UK.qxp 25-10-2006 8:44 Pagina 13

02_Athena_Leva_UK.qxp 25-10-2006 8:44 Pagina 14

Model: Athena 2 Groups - Net weight: 60 Kg - Gross weight: 70 Kg - Thermal power: 3000 W - Boiler capacity 15,2 lt.

Dimensions: 640 x 550 x 710h mm - Packaging dimensions: 850 x 630 x 580h mm - Finishing in hammered sheet: copper, chrome, brass

Model: Athena 3 Groups - Net weight: 75 Kg - Gross weight: 85 Kg - Thermal power: 5000 W - Boiler capacity 22,8 lt.

Dimensions: 840 x 550 x 710h mm - Packaging dimensions: 1050 x 630 x 580h mm - Finishing in hammered sheet: copper, chrome, brass

The international marks of approval certify that all the machines have undergone very careful tests and inspections

ATHENALEVA

02_Athena_Leva_UK.qxp 25-10-2006 8:44 Pagina 15

SAFETY DIRECTIONS



This manual is an integral and essential part of

the product and it will have to be consigned to

the user. Read carefully the directions stated in

this manual as they supply important advice

about the safety of the set up, of the use and the

maintenance.

Keep this manual with care for any further con-

sultations.



After having taken off the packaging, make

sure about the machine's integrity. If in doubt, do

not use it and ask to professionally qualified per-

sonnel. The packaging elements must not be left

at children's reach as they are potential sources

of danger, and be disposed of carefully.



ANGER OF POLLUTION



Before connecting the machine make sure

that the data on the plate correspond to the

electric supply net. The set up must be carried

out respecting the actual regulations within the

Country where the machine is set up, according

to the manufacturer's instructions and by quali-

fied personnel.

The manufacturer cannot be considered respon-

sible for possible damages caused by the lack of

grounding of the plant. For the electrical safety

of this machine it is compulsory to arrange the

plant of grounding, asking to a certified and

qualified electrician to check that the electric

power of the plant is suitable for the maximum

power stated on the plate.

In particular he/she will also have to make sure

that the section of the plant's cables is suitable

for the power absorbed by the set.

It is forbidden to use adapters, multiple sockets

and extensions.

If their use were crucial it is necessary to call a

qualified electrician.



The machine has to be set up according to

the local health regulations in being for the

hydraulic plants. So for the hydraulic plant ask

to an authorised technician.



This set must only be used in the way descri-

bed in this manual.

The manufacturer cannot be considered respon-

sible for possible damages caused by improper,

GENERAL NOTES ON THE CONSIGNMENT

02_Athena_Leva_UK.qxp 25-10-2006 8:45 Pagina 16

wrong or irrational uses.

 W

ARNING

Before using the machine read the whole manual

or at least the safety prescriptions and the get-

ting ready.



The use of any electric set implies complying

with some fundamental regulations. In particular:

• do not touch the set with wet hands or feet

• do not use the set barefoot;

• do not use extension in rooms with showers or

baths;

• do not pull the feeding cable to disconnect the

set from the power supply net;

• do not leave the set exposed to atmospheric

agents (rain, sun etc.);

• do not allow children to use the set, neither

unauthorised personnel and anyone who hasn't

read and completely understood this manual.



The authorised technician before performing

any operation, has to unplug the machine after

having switched off the switch.



bis For the cleansing operations, the machi-

ne has to be set on energetic state “O”, that is

to say “machine's switch switched off

and ” and one has to strictly keep to what is

foreseen in this manual.



In case of breakdown, fault or bad working,

switch the set off. It is strictly forbidden to inter-

vene. Ask only to professionally qualified person-

nel.

The possible fixing of the products will have to be

carried out by the manufacturer or by an autho-

rised assistance centre by using exclusively origi-

nal spare parts.

Failing the respect of what is written above, the

safety of the set can be compromised



At the set up, the certified electrician will

have to foresee a unipolar switch as it is foreseen

by the actual safety regulations with contacts'

opening distance equal to or bigger than 3 mm.



To avoid dangerous overheating we suggest

unrolling the power cable for its full length.



The user must not replace the power cable of

this set. In case of damage, switch the set off and

for its replacement ask only to professionally

qualified personnel.



If you decide not to use this kind of set any-

more, we suggest to make it ineffective after

unplugging it, and to cut the power supply cable.

 W

ARNING

ANGER OF POLLUTION

Dispose of the machine carefully: either ask to an

02_Athena_Leva_UK.qxp 25-10-2006 8:45 Pagina 17

authorised centre for its disposal or get in touch

with the manufacturer that will supply you with

the necessary information about it.



To help the machine's aeration place it at cm

15 from the walls from other machines.



When using the steam pipe, pay attention

not to put your hands under it and not to touch

it soon after the use.

 W

ARNING

! D

ANGER OF BURNING



Remember that before any set up operations,

maintenance, unloading, regulation, the quali-

fied operator will have to wear gloves and shoes

for accident-prevention.



WARNING

INFORMATION TO THE USERS

Under the senses of art. 13 of

Law Decree 25th July 2005, n.

151 “Implementation of the

Directives/ Guidelines

2002/95/CE, 2002/96/CE and

2003/108/CE, concerning the

reduction of the use of dangerous sub-

stances in electric and electronic equip-

ment, as well as the disposal of wastes“.

The symbol of the crossed large rubbish con-

tainer that is present on the machine points

out that the product at the end of its life cycle

must be collected separately from the other

wastes. The user for this reason will have to

give the equipment that got to its life cycle to

the suitable separate waste collection centres

of electronic and electrotechnical wastes, or to

give it back to the seller or dealer when buying

a new equipment of equivalent type, in terms

of one to one. The suitable separate waste col-

lection for the following sending of the disused

equipment to recycling, the dealing or hand-

ling and compatible environment disposal con-

tributes to avoid possible negative effects on

the environment and on the people's health

and helps the recycling of the materials the

machine is composed of. The user's illegal

disposal of the product implies the application

of administrative fines as stated in Law Decree

n.22/1997” (article 50 and followings of the

Law Decree n.22/1997)

02_Athena_Leva_UK.qxp 25-10-2006 8:45 Pagina 18

DESCRIPTION OF MACHINE

CONTROLS AND OPERATION

Heating plate

Lever

Vapor tap

Water level

indicator

Main switch

Filterhalter

Work bench

Manometer with

double scale

Coffee dispensing unit

Warm water tap

02_Athena_Leva_UK.qxp 25-10-2006 8:45 Pagina 19

TRANSPORT AND MOVEMENT

MACHINE IDENTIFICATION

For any communication with the manufacturer

Victoria Arduino, always quote the machine's

number plate.

The machine is carried in pallett with other

machines in cardboard boxes fastened to the pal-

lett through centring or ropes.

Before carrying out any transport or movement

operations, the operator will have to:

• wear gloves and shoes suitable for accident-preven-

tion and an overall with elastic bands on the limbs.

The pallett transportation has to be carried out

with a suitable lifting means (like a forklift truck).



WARNING! D

ANGER OF CRASH OR COMPRESSION

The operator during the movement, has always

to pay attention that people, things or objects

are not in the way in the operation's area.

Lift the pallett slowly at about 30 cm from the

ground and reach the loading area. After

checking that there are no obstacles, things nor

people, proceed to the loading.

Once you get at destination, always using an

adequate lifting means (e.g. forklift truck), after

making sure there aren't things nor people in the

unloading area, take the pallett to the ground

and move it up to 30 cm from the ground, until

the stocking area.



WARNING! D

ANGER OF CRASH OR COMPRESSION

Before performing the following operation,

check the load is safe at its place and that when

cutting the centring or ropes it doesn't fall down.

The operator wearing gloves and shoes for acci-

dent-prevention, will have to proceed to the cut-

ting of the centring or ropes and to the stocking

of the product. During this operation, please

check the technical characteristics of the product

to see the machine's weight to be stocked and

be able to act consequently.

 WARNING! DANGER OF POLLUTION

Once you have freed the machine from the pal-

lett or the container, dispose of it carefully, dan-

ger of pollution.

02_Athena_Leva_UK.qxp 25-10-2006 8:45 Pagina 20

After having checked that nothing fails in the

packaging, put the machine in the place fore-

seen and pay attention that it is level by adju-

sting the pins. If the extension pins are fore-

seen, the assembling will be carried out by

untwisting completely the pin and twisting it

back again on the metal insert supplied with

the extension, then put the cylindrical shell

made of plastic on the insert.

Then twist the levers' arms that are on the

respective supply groups.

Place the softener in the space foreseen. We

remind that for the VICTORIA ARDUINO

ATHENA LEVA does not have a pump, the

pressure that is necessary for the coffee sup-

ply is gained by the lever group, so the con-

nections' operations are quite simplified.

the pump is built-in the machine itself, so the faste-

ning operations will be extremely simplified.

We advice to avoid narrowing in the tubes, to

pay attention to the unloading and to use an

electric cable of equal section, if the one sup-

plied is not enough.

The machine must always be protected with an

automatic switch of adequate power.

It is advisable to fit a pressure reducer between the

machine and the water mains. This piece, which is

supplied with the machine, serves to guarantee the

correct pressure level of the water entering the

machine. The inlet pressure for the coffee machi-

ne should be approximately 2 bar.

The Company is not responsible for any damage

caused to things or people deriving from failing

the safety regulations' observance.

STARTING

Even if all the machines VICTORIA ARDUINO

have an automatic level, it's good rule, in the

initial phase, to fill the boiler manually to avoid

that the electric resistance is damaged and the

electronic safety is connected (this one stucks

the machine if the self-level is inserted more

than 90 seconds. If this happens it is anyway

enough to switch the machine off and then

switch it on again, to complete the boiler's loa-

ding)

Removing the grill and the worktop drip tray it

is possible to operate on the hydraulic circuit of

the machine (see picture).

The entrance machine tap 1 must always be

turned open after the connection to the machi-

ne's net has been carried out.

SET-UP INSTRUCTIONS

02_Athena_Leva_UK.qxp 25-10-2006 8:45 Pagina 21

To carry out the manual filling, before swit-

ching the machine on, turn the manual loading

tap 2 that is below the worktop.

Once the boiler is half filled, turn again the

manual loading tap 2 and switch the machine

on in order to activate the automatic level, also

check that the water inlet cock 1 and the auto-

matic level cock 3 are open.

Remark: a tap is turned open when turning the

lever it is parallel to the tap's body.

After about 20 minutes the machine will have

reached the working pressure that can be noti-

ced and taken from the double scale manome-

ter. To change the boiler working pressure, (and

also its temperature) according to the different

needs or characteristics of the coffee used, it is

necessary to remove the cups warming band,

the cups warming plate and the side right

panel and to turn the manostat regulation

screw, by turning it clockwise the pressure

02_Athena_Leva_UK.qxp 25-10-2006 8:45 Pagina 22

Tabla de contenidos

Otros manuales de Cafetera de Victoria Arduino

Victoria Arduino

Victoria Arduino VENUS FAMILY Manual de usuario

Victoria Arduino

Victoria Arduino BLACK EAGLE MAVERICK Manual de instrucciones

Victoria Arduino

Victoria Arduino Adonis+ Manual de instrucciones

Victoria Arduino

Victoria Arduino Black Eagle UA 388 Manual de usuario

Victoria Arduino

Victoria Arduino Mythos 1 Manual de instrucciones

Victoria Arduino

Victoria Arduino ADONIS 3 gruoups Manual de usuario

Victoria Arduino

Victoria Arduino athena Manual de usuario

Victoria Arduino

Victoria Arduino Venus Family Brass Manual de usuario

Victoria Arduino

Victoria Arduino Athena Semiautomatic Manual de usuario

Victoria Arduino

Victoria Arduino VA388 BLACK EAGLE 3GR Manual de usuario

Victoria Arduino

Victoria Arduino Adonis+ Manual de usuario

Victoria Arduino

Victoria Arduino WHITE EAGLE VA358 Manual de instrucciones

Victoria Arduino

Victoria Arduino ADONIS 2 gruoups Manual de usuario

Victoria Arduino

Victoria Arduino EAGLE TEMPO Manual de instrucciones

Victoria Arduino

Victoria Arduino EAGLE ONE PRIMA Manual de instrucciones

Victoria Arduino

Victoria Arduino EAGLE ONE PRIMA Manual de instrucciones

Victoria Arduino

Victoria Arduino Eagle One Manual de usuario

Victoria Arduino

Victoria Arduino VA388 BLACK EAGLE 3GR Manual de instrucciones

Victoria Arduino

Victoria Arduino Adonis+ 2 Gr Manual de usuario

Victoria Arduino

Victoria Arduino Venus Bar Manual de usuario

Victoria Arduino

Victoria Arduino UA 388 Black Eagle Manual de instrucciones

Victoria Arduino

Victoria Arduino Mythos 1 Manual de instrucciones

Victoria Arduino

Victoria Arduino EAGLE ONE PRIMA Manual de usuario

Victoria Arduino

Victoria Arduino WHITE EAGLE VA358 Manual de instrucciones

Manuales populares de Cafetera de otras marcas

Taurus

Taurus Livorno 6 Manual de usuario

Delta-q

Delta-q QUICK Manual de usuario

Bunn

Bunn LCA-1 Guía de solución de problemas

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Instrucciones de instalación

Saeco

Saeco Vienna Plus Sup 018M Manual de usuario

DeLonghi

DeLonghi DC300 Manual de usuario

INCAPTO

INCAPTO BXCO1470E Manual de usuario

Bosch

Bosch TASSIMO finesse TAS16B Series Manual de usuario

Exido

Exido 245-072 Manual de usuario

Animo

Animo OptiVend Choco Manual de usuario

Siemens

Siemens TQ505DF Series Manual de usuario

DeLonghi

DeLonghi ECI341 Manual de usuario

Krups

Krups KT406511 Manual de usuario

Cimbali

Cimbali M32 Classic Manual de usuario

Philips

Philips HL3844N Manual de usuario

Bosch

Bosch TES 515 SERIES Manual de usuario

Tekmatix

Tekmatix TMFM - 65 Manual de usuario

Scarlett

Scarlett SC-CM33005 Manual de usuario