Vicon I-ONYX VND-970IP Manual de usuario

Configuring the VND-970IP

When the dome has been connected to the network check that the dome is in the same IP range as being used by ViconNet,

the default IP address for the VND-970IP is 192.168.0.100. if the IP that is to be used is different then this IP address will

need to be changed to the same range. To change this setup, use a PC on the same IP range as the camera and then use

internet explorer, enter the camera address into the address bar and press go. The dome is set to get IP address automatically.

Go to the nucleus machine and log on.

Once logged in click on setup this will then bring up setup site selection

Select the nucleus setup (this will be the top selection in the list) and press the select, you will now enter the nucleus settings

From here click on the I-Onyx 9xx and third party camera button.

This will now enter into I-onyx and third party camera settings for adding I-onyx and third party cameras

When using ViconNet 5.2 then add camera needs to be pressed and the settings added manually

Add all the details camera name, IP address, username, password and Vendor name this must be set to VND-970

Once these details have been entered click on the save and the details will now be shown in the camera list.

Now close this screen and exit out of the setup back to the main screen, the camera will now be shown in

the ViconNet tree on the left of the screen.

Click on the camera this will now show 1 Camera 1 click this and the camera will now appear on the screen

This is the camera now setup through the ViconNet.

When using Viconnet 5.6b adding the camera to the ViconNet instead of add camera you should add I-

onyx 9xx camera

On the screen there is a drop down box that says available I-onyx cameras on net find your camera this will

insert the camera name and IP address into the boxes, save the settings the camera information will now be

shown in the camera list

Close the window until back to main window, select the camera it will then display 1 Camera 1 select this

and the picture will now be on the screen.

This is the camera setup onto the ViconNet system.

The next step will be to set the cameras for record. Before you do this you need to check that the clock

settings of the camera are set correctly for your location. Please check the camera manual for the clock

configuration. Next go into the setup for the NVR that you are recording to and click the macro editor

button

In the macro editor click on add macro this will then open up the editor for setting up the macro

Enter a name for your macro e.g. VND-970IP and select record

At the bottom you will now have a list of cameras that are available select the VND-970IP and the

1 Camera 1 this will go bold text then select the duration tick the unlimited box select the quality and then

apply.

This will now show the macro that has been setup now press the save and close the macro window that will

take you back to the NVR setup

Now you will need to setup the schedule for the macro to record click the schedule for macro button this

will take you into the schedule for macro window

Click on the Add button and select the created macro in the drop down box

Once the macro has been selected click save and close the scheduler and exit the NVR setup back to the

main screen.

This will now be recording the camera and this can be seen at the bottom of the screen

This shows that the camera is recording and the schedule is active getting the system to record the VND-

970IP

Otros manuales para I-ONYX VND-970IP

Otros manuales de Cámara de seguridad de Vicon

Vicon

Vicon V600-C Series Manual de usuario

Vicon

Vicon Roughneck Pro V2000 Series Manual de usuario

Vicon

Vicon V992D-IR Manual de usuario

Vicon

Vicon V960D-N312 Manual de instrucciones

Vicon

Vicon V1008-WIR-180 Manual de usuario

Vicon

Vicon SN688D-WIR Manual de usuario

Vicon

Vicon V923-N Manual de usuario

Vicon

Vicon V9360-1 Guía de inicio rápido

Vicon

Vicon V9317H Series Manual de usuario

Vicon

Vicon VC2650-DSP Manual de usuario

Vicon

Vicon SurveyorVFT SVFT-M Manual de usuario

Vicon

Vicon ROUGHNECK V910 Manual de usuario

Vicon

Vicon V7FCD Guía del usuario

Vicon

Vicon V922B-W551-A1 Manual de usuario

Vicon

Vicon V960-N Series Manual de instrucciones

Vicon

Vicon I-ONYX MPD-980DN-O Manual de usuario

Vicon

Vicon VC-700W Manual de usuario

Vicon

Vicon V898MSH Guía del usuario

Vicon

Vicon V9360-6 Series Manual de usuario

Vicon

Vicon V988D Manual de usuario

Vicon

Vicon I-Onyx MPD-955DN-O Manual de usuario

Vicon

Vicon V9360 Manual de usuario

Vicon

Vicon Roughneck V2000D-PTZ Manual de usuario

Vicon

Vicon Surveyor 2000 Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario

Lumens

Lumens VC-A50PNW Manual de usuario