Viavi 3550 Manual del propietario

3550/3550R

Communications Test Set

Remote Programming Manual

RCI MANUAL

COMMUNICATIONS TEST SET

3550 / 3550R

PUBLISHED BY

VIAVI Solutions, Inc.

transmitted in any form or by any means, electronic, mechanical, photocopying, recording or

otherwise without the prior permission of the publisher.

Re-Issued Feb 2020

10200 West York / Wichita, Kansas 67215 U.S.A. / (316) 522-4981 / FAX (316) 524-2623

Electromagnetic Compatibility:

For continued EMC compliance, all external cables must be shielded and three meters or less in

length.

Nomenclature Statement:

In this manual, 3550 / 3550R, Test Set or Unit refers to the 3550 / 3550R Communications Test Set.

Product Warranty:

Refer to https://www.viavisolutions.com/en-us/support/warranty-quality-compliance-policies for

product warranty information.

THIS PAGE INTENTIONALLY LEFT BLANK.

SAFETY FIRST: TO ALL OPERATIONS PERSONNEL

REFER ALL SERVICING OF UNIT TO QUALIFIED TECHNICAL PERSONNEL. THIS UNIT CONTAINS NO

OPERATOR SERVICEABLE PARTS.

WARNING: USING THIS EQUIPMENT IN A MANNER NOT SPECIFIED BY THE ACCOMPANYING

DOCUMENTATION MAY IMPAIR THE SAFETY PROTECTION PROVIDED BY THE EQUIPMENT.

CASE, COVER OR PANEL REMOVAL

Opening the Case Assembly exposes the operator to electrical hazards that can result in electrical shock or

equipment damage. Do not operate this Test Set with the Case Assembly open.

SAFETY IDENTIFICATION IN TECHNICAL MANUAL

This manual uses the following terms to draw attention to possible safety hazards, that may exist when

operating or servicing this equipment.

CAUTION: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN

EQUIPMENT OR PROPERTY DAMAGE (E.G., FIRE).

WARNING: THIS TERM IDENTIFIES CONDITIONS OR ACTIVITIES THAT, IF IGNORED, CAN RESULT IN

PERSONAL INJURY OR DEATH.

SAFETY SYMBOLS IN MANUALS AND ON UNITS

CAUTION: Refer to accompanying documents. (This symbol refers to specific CAUTIONS

represented on the unit and clarified in the text.)

AC OR DC TERMINAL: Terminal that may supply or be supplied with AC or DC voltage.

DC TERMINAL: Terminal that may supply or be supplied with DC voltage.

AC TERMINAL: Terminal that may supply or be supplied with AC or alternating voltage.

EQUIPMENT GROUNDING PRECAUTION

Improper grounding of equipment can result in electrical shock.

USE OF PROBES

Check the specifications for the maximum voltage, current and power ratings of any connector on the Test Set

before connecting it with a probe from a terminal device. Be sure the terminal device performs within these

specifications before using it for measurement, to prevent electrical shock or damage to the equipment.

POWER CORDS

Power cords must not be frayed, broken nor expose bare wiring when operating this equipment.

USE RECOMMENDED FUSES ONLY

Use only fuses specifically recommended for the equipment at the specified current and voltage ratings.

INTENDED USE

The 3550 is intended for indoor use only and should not be subjected to conditions which cause water or other

liquids to collect on the Touch Screen Display.

The 3550R is intended for use in both indoor and outdoor environments and remains functional in typical rain

conditions.

INTERNAL BATTERY

This unit contains a Lithium Ion Battery, serviceable only by a qualified technician.

CAUTION: SIGNAL GENERATORS CAN BE A SOURCE OF ELECTROMAGNETIC INTERFERENCE (EMI) TO

COMMUNICATION RECEIVERS. SOME TRANSMITTED SIGNALS CAN CAUSE DISRUPTION AND

INTERFERENCE TO COMMUNICATION SERVICES OUT TO A DISTANCE OF SEVERAL MILES.

USERS OF THIS EQUIPMENT SHOULD SCRUTINIZE ANY OPERATION THAT RESULTS IN

RADIATION OF A SIGNAL (DIRECTLY OR INDIRECTLY) AND SHOULD TAKE NECESSARY

PRECAUTIONS TO AVOID POTENTIAL COMMUNICATION INTERFERENCE PROBLEMS.

THIS PAGE INTENTIONALLY LEFT BLANK.

PREFACE

SCOPE

This Manual contains Instructions for operating the 3550 / 3550R through a remote interface. It is

strongly recommended that the programmer be thoroughly familiar with the operational functions of

the Unit and this manual before attempting to remotely configure the 3550 / 3550R.

ORGANIZATION

The Manual is composed of the following Chapters:

CHAPTER 1 - REMOTE OPERATION CONFIGURATION

Describes how to configure the 3550 / 3550R for remote operation.

CHAPTER 2 - REMOTE OPERATION COMMANDS

Identifies and explains the Remote Operation commands.

TABLE OF CONTENTS

PARAGRAPH PAGE

CHAPTER 1 - REMOTE OPERATION CONFIGURATION

1-1 General ...................................................................................................... 1-1

1-3 Remote Operation Configuration ................................................................... 1-1

CHAPTER 2 - REMOTE OPERATION COMMANDS

2-1 General ...................................................................................................... 2-1

2-2 Remote Operation Commands....................................................................... 2-1

AF Counter ............................................................................................. 2-2

AGC....................................................................................................... 2-4

Audio Level Meter ................................................................................... 2-5

C4FSK ................................................................................................... 2-9

Calibration.............................................................................................. 2-25

DCS....................................................................................................... 2-26

Demod ................................................................................................... 2-27

Deviation Meter / Modulation Meter ........................................................... 2-28

Distortion Meter ...................................................................................... 2-31

External Audio Input ................................................................................ 2-34

External Audio Output.............................................................................. 2-35

External RF Power................................................................................... 2-36

Frequency Find ....................................................................................... 2-41

Frequency List ........................................................................................ 2-42

Function Generator.................................................................................. 2-43

Normalize............................................................................................... 2-44

Options .................................................................................................. 2-45

Oscilloscope ........................................................................................... 2-46

Receiver................................................................................................. 2-49

RF Error Meter........................................................................................ 2-50

RF Generator.......................................................................................... 2-52

RF Power Meter ...................................................................................... 2-54

RSSI Meter............................................................................................. 2-58

Screens.................................................................................................. 2-61

Scripting................................................................................................. 2-63

Setup..................................................................................................... 2-66

Signaling................................................................................................ 2-68

Sinad Meter ............................................................................................ 2-77

Speaker.................................................................................................. 2-80

Spectrum Analyzer .................................................................................. 2-81

Tracking Generator.................................................................................. 2-84

Upconverter............................................................................................ 2-86

CHAPTER 1 - REMOTE OPERATION CONFIGURATION

1-1

1-1. GENERAL

The 3550 / 3550R can be controlled through a serial interface.

1-2. REMOTE OPERATION CONFIGURATION

The 3500 / 3500A can be configured for remote operation using an Ethernet connection.

This is an example configuration for a static address on the PC

utilizing an Ethernet Crossover Cable.

1. On the PC, select the Internet Protocol (TCP/IP). Select ‘Properties.’

Otros manuales para 3550

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de prueba de Viavi

Viavi

Viavi T-BERD 6000A V2 Manual de lista de piezas

Viavi

Viavi SmartClass Fiber MPOLx Manual de lista de piezas

Viavi

Viavi OCC-4056 Manual de lista de piezas

Viavi

Viavi T-BERD/MTS 8000 Manual de usuario

Viavi

Viavi SmartClass Fiber OLTS-85 Manual de usuario

Viavi

Viavi T-BERD/MTS 5800 Guía de instalación

Viavi

Viavi ComXpert CX100 Manual de usuario

Viavi

Viavi OneAdvisor 1000 Manual de usuario

Viavi

Viavi T-BERD MTS-580 Manual de lista de piezas

Viavi

Viavi ATC-5000NG Manual de usuario

Viavi

Viavi IFR 6000 Manual de usuario

Viavi

Viavi HST-3000 Manual de usuario

Viavi

Viavi 3900 Series Manual de usuario

Viavi

Viavi ComXpert CX100 Manual de usuario

Viavi

Viavi IFR 6000 Manual de lista de piezas

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Viavi

Viavi T-BERD MTS 5800 Manual de lista de piezas

Viavi

Viavi T-BERD/MTS 2000 Manual de usuario

Viavi

Viavi OneAdvisor ONA-800 Manual de lista de piezas

Viavi

Viavi T-BERD/MTS 5800 Manual de usuario

Viavi

Viavi T-BERD/MTS-5800 OCC-4056C Manual de lista de piezas

Viavi

Viavi CT-X Manual de usuario

Viavi

Viavi T-BERD/MTS-5800 Manual de lista de piezas

Viavi

Viavi OneExpert DSL Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario