VEVOR KH-375 Manual de usuario
1
Contents
Ⅰ.Precautions…………………………………………………............................2
Ⅱ. Introduction for main parts………………............................…....3-6
Ⅲ. Technical parameters………….…..............................................7-8
Ⅳ. Bracket assembly diagram……..…………..............................….9-12
Ⅴ.Blade assembly……...............................................................13-15
Ⅵ.How to use the product…......................................................16-23
Ⅶ.How to connect products to software............................................24
Ⅷ. Software and driver installation…........................................25-30
Ⅸ. Connection of software and machine…...............................31-34
Ⅹ.Troubleshooting..................................................................35-37
2
Ⅰ.Precautions
1. Protective material must be removed before turning on the cutting plotter.
2. Check the label on the back side of the plotter to confirm that the rated
voltage required by the plotter matches the voltage of the power base.
3. Firstly make sure that the power switch is off, then plug the power supply
into grounded power outlet.
4. Please do not touch the power cord with wet hands to avoid electric shock.
5. Please only use the power cord, data cable provided with this product, or
manufacturer-approved replacements.
6. Please do not drop metal objects and liquids into the machine to avoid
malfunction.
7. After shutting down, you must wait another 5 seconds to turn on the cutting
plotter again, otherwise it will cause damage to the cutting plotter.
8. In thunderstorms, turn the power switch to OFF and unplug the power cord.
9. Please do not privately change the manufacturer's components.
10. Manufacturer reserves the right to change product specifications without
prior notice.
11. The manufacturer only bears the legal obligations of the product itself sold
to the users, and does not bear other losses caused by the malfunction of
the products.
12. Without our company’s permit, no part of this manual can be copied or
transmitted in any name.
13. Do NOT drag the carriage by hand.
14. If there is an abnormal sound after powering on the machine, please turn off
the power immediately and contact the after-sales department for feedback.
3
Ⅱ. Introduction for main parts
KH Model
Left side Right side
1.Cover for rail guide
2. Pinch roller kit
3. Roller for feeding paper
4. Carriage
5. Reset switch
6. Screen
7. Buttons
8. The right cover
9. Blade clamp
10. The left cover
11.Power connection
12.Fuse holder
13.Power switch
14.USB port
15.COM port
4
KI Model
Left side Right side
1.Cover for rail guide
2. Pinch roller kit
3. Roller for feeding paper
4. Carriage
5. Screen
6. Buttons
7. The right cover
8. Reset switch
9. Blade clamp
10. The left cover
11.Power connection
12.Fuse holder
13.Power switch
14.USB port
15.COM port
1
2
3
4
5
6
7
10
9
8
5
EH Model
Left side Right side
1.Cover for rail guide
2. Pinch roller kit
3. Roller for feeding paper
4. Carriage
5. Reset switch
6. Screen
7. Buttons
8. The right cover
9. Blade clamp
10. The left cover
11.Power connection
12.Fuse holder
13.Power switch
14.USB port
15.COM port
16.U-disk port
6
SK Model
Left side Right side
1.Cover for rail guide
2. Pinch roller kit
3. Roller for feeding paper
4. Carriage
5. Screen
6. Buttons
7. The right cover
8. Reset switch
9. Blade clamp
10. The left cover
11.Power connection
12.Fuse holder
13.Power switch
14.USB port
15.COM port
7
Ⅲ. Technical parameters
Model
Item
375
720
870
1350
Max. feeding width
375mm
720mm
870mm
1350mm
Max. cutting width
285mm
630mm
780mm
1260mm
Cutting thickness
≤1mm
Speed/Pressure
20-1200mm/s 20-1000g
Buffer
1-4M
LCD display
CN/EN
Real-time
Speed adjusting
Support
Interface
COM+USB / COM+USB+U-DISK
Re-cutting function
Support
Re-cutting accuracy
0.127mm
Resolution Ratio
0.0245mm/step
Language format
DMPL/HPGL
Voltage
AC85-264V
8
Accessory box
Item
Quantity
Unit
1
Cutting plotter
1
Set
2
Power supply cable
1
Pc
3
Blade
1
Box
4
Blade holder
1
Pc
5
Pen holder
1
Pc
6
Ball pen core
1
Pc
7
COM connection cable
1
Pc
8
USB cable
1
Pc
9
Spanner
1
Pc
10
USB driver
1
Pc
11
Bracket screws
1
Bag
To protect the machine, use only the accessories in this
accessory box
9
Ⅳ. Bracket assembly diagram
1-1 Iron bracket assembly diagram
1. M6*40 Hex bolts 8pcs
10
1-2 Al bracket assembly diagram
Este manual sirve para los siguientes modelos
15
Tabla de contenidos
Otros manuales de Cortador de VEVOR
VEVOR
VEVOR 8103E-2/17 Manual de usuario
VEVOR
VEVOR RC-16 Manual de usuario
VEVOR
VEVOR CT-650 Manual de usuario
VEVOR
VEVOR SL-400 Instrucciones de instalación
VEVOR
VEVOR CT-174 Manual de usuario
VEVOR
VEVOR k110D Manual de usuario
VEVOR
VEVOR AY-420 Manual de usuario
VEVOR
VEVOR J1G-ZB-355B Manual de usuario
VEVOR
VEVOR YT-160AS Manual de usuario
VEVOR
VEVOR 10190010215 Manual de usuario
Manuales populares de Cortador de otras marcas
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Manual de usuario
Makita
Makita DCS552 Manual de usuario
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 Manual de usuario
Makita
Makita 4112HS Manual de usuario
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S Manual de usuario
Hitachi
Hitachi CM 4SB2 Guía de solución de problemas
