B-3
Item
Bin_CH _0
Bin_CH _1
Bin_CH _2
Bin_CH _3
Bin_CH _4
Channel_Down
Channel_Up
Compander_On
Compander_Off
Compander_Toggle
CTCSS/DCS
_Enc _On
CTCSS/DCS
_Enc _Off
CTCSS/DCS
_Enc _Toggle
CTCSS/DCS
_Dec_On
CTCSS/DCS
_Dec_Off
CTCSS/DCS
_Dec_Toggle
Two _Tone _Dec _On
Two _Tone _Dec _Off
Two _Tone_Dec _Toggle
CW_ID _On
CW_ID _Off
CW_ID _Toggle
CW_ID _Single
CW_Message _1
CW_Message _2
CW_Message _3
CW_Message _4
CW_Message _5
CW_Message _6
CW_Message _7
CW_Message _8
CW_Message _Bin _0
CW_Message _Bin _1
CW_Message _Bin _2
CW_Message _Bin_Trig
DC_Power _Save _On
DC_Power _Save _Off
DC_Power _Save_Toggle
Encryption_On
Encryption_Off
Encryption_Toggle
Encryption_Code
Local_PTT _On
Local_PTT _Off
Local_PTT _Toggle
Function
Recall the Memory Channel (Binary LSB)
Recall the Memory Channel (Binary)
Recall the Memory Channel (Binary)
Recall the Memory Channel (Binary)
Recall the Memory Channel (Binary MSB)
Step to the next-lower Operating Channel
Step to the next-higher Operating Channel
Turn the Compander Circuit "On"
Turn the Compander Circuit "Off"
Turn the Compander Circuit "On" or "Off" (Toggle)
Turn the CTCSS/DCS Encoder "On"
Turn the CTCSS/DCS Encoder "Off"
Turn the CTCSS/DCS Encoder "On" or "Off" (Toggle)
Turn the CTCSS/DCS Decoder "On"
Turn the CTCSS/DCS Decoder "Off"
Turn the CTCSS/DCS Decoder "On" or "Off" (Toggle)
Turn the 2-Tone Decoder "On"
Turn the 2-Tone Decoder "Off"
Turn the 2-Tone Decoder "On" or "Off" (Toggle)
Turn the CW IDer "On"
Turn the CW IDer "Off"
Turn the CW IDer "On" or "Off" (Toggle)
Transmit the CW ID
Send the CW Message 1
Send the CW Message 2
Send the CW Message 3
Send the CW Message 4
Send the CW Message 5
Send the CW Message 6
Send the CW Message 7
Send the CW Message 8
CW Message Recall (Binary LSB)
CW Message Recall (Binary)
CW Message Recall (Binary MSB)
Send the CW Message which is recalled from I/O port
Turn the DC Power Save Feature "On"
Turn the DC Power Save Feature "Off"
Turn the DC Power Save Featuer "On" or "Off" (Toggle)
Turn the Encryption Circuit "On"
Turn the Encryption Circuit "Off"
Turn the Encryption Circuit "On" or "Off" (Toggle)
Select the Encryption Code
Enable the Local PTT Switch
Disable the Local PTT Switch
Enable/Disable the Local PTT Switch (Toggle)
PROGRAMMABLE I/O PORT INPUT ITEMS
Item
Monitor_On
Monitor_Off
Monitor_Toggle
Monitor_M
Multi_Tone_Main
Multi_Tone _Sub
Multi_Tone _Toggle
Panel_Indicator _On
Panel_Indicator _Off
Panel_Indicator _Toggle
Repeat_On
Repeat_Off
Repeat_Toggle
Reset
Scan_On
Scan_Off
Scan_Toggle
Squelch_On
Squelch_Off
Squelch_Toggle
Test_Tone _On
Test_Tone _Off
Test_Tone _Toggle
Test_Tone_M
TOT_On
TOT_Off
TOT_Toggle
Transmit_On
Transmit_Off
Transmit_Toggle
TX_Power _Mid _On
TX_Power _Mid _Off
TX_Power _Mid _Toggle
TX_Power _Low_On
TX_Power _Low_Off
TX_Power _Low_Toggle
Function
Turn the Monitor Function "On"
Turn the Monitor Function "Off"
Turn the Monitor Function "On" or "Off" (Toggle)
Turn the Monitor Function "On" when the I/O port is
"High"
Select the Tone Table to "Main"
Select the Tone Table to "Sub"
Switch the Tone Table between "Main" and "Sub"
(Toggle)
Turn the Front Panel's Illumination "On"
Turn the Front Panel's Illumination Off
Turn the Front Panel's Illumination "On" or "Off" (Toggle)
Set theOperating Mode to "Repeat" mode
Set theOperating Mode to "Base" mode
Toggle theOperating Mode between the "Repeat"
mode and "Base" mode
Reset the Repeater
Start Scanning
Stop Scanning
Toggle the Scanner between "Start" and "Stop"
Turn the Squelch Circuit "On (Close)"
Turn the Squelch Circuit "Off (Close)"
Turn the Squelch Circuit "On" or "Off" (Toggle)
Generate the Test Tone Signal
Stop the generation of the Test Tone
Toggle the Test Tone genetation "On" and "Off"
Generate the Test Tone Signal when the I/O port is
"High"
Turn the Time-Out Timer featuer "On"
Turn the Time-Out Timer featuer "Off"
Turn the Time-Out Timer featuer "On" or "Off"
Enable the transmission of the Repeater
Disable the transmission of the Repeater
Enable/Disable the transmission of the Repeater
Set the transmitter power to the "Mid" level
Return the transmitter power to "Original" power level
Toggle the transmitter power between the "Mid" level
and "Original" power level
Set the transmitter power to the "Low" level
Return the transmitter power to "Original" power level
Toggle the transmitter power between the "Low" level
and "Original" power level
PROGRAMMABLE I/O PORT OUTPUT ITEMS
DSUB 25-pin Accessory Connector
Item
Remote_Enb
Busy
CTCSS_Correspond
DCS_Correspond
CTCSS/DCS_Correspond
RX_Unlock
TX_Unlock
PLL _Unlock
Function
Output the signal when the Operating mode is set to
"Repeat" mode.
Output the signal when the squelch is opened.
Output the signal when the receiving CTCSS tone is
matched.
Output the signal when the receiving DCS code is
matched.
Output the signal when the receiving CTCSS tone or
DCS code is matched.
Output the signal when the RX PLL Circuit is Unlocked.
Output the signal when the TX PLL Circuit is Unlocked.
Output the signal when the TX or RX PLL Circuit is
Unlocked.
Item
Power_Supply_Backup
Power_Supply_Voltage
Transmit
Fan_Alarm
Fan_Status
High_Temperature
TX_PD _Det
Anser_Back
Function
Output the signal when the backup power source is
used.
Output the signal when the main power source is used.
Output the signal when the repeater is transmitting.
Output the signal when the Coolig Fan is disabled.
Output the signal when the Coolig Fan is activated.
Output the signal when the PA Unit is High Tempera-
ture.
Output the signal when the TX power is abnormalily.
Output the signal when the repeater status is changed
from the Remote Control command.
