Versitron SG71090 Manual de usuario
www.versitron.com -1- SG71090
SG71090
24-Port 10/100/1000Base
Modular Pick-a-Port Switch
with Management &
100/1000Base SFP support
Installation Guide
v2.0
© January 2013
VERSITRON, Inc.
83 Albe Drive / Suite C
Newark, DE 19702
www.versitron.com
www.versitron.com -2- SG71090
PROPRIETARY DATA
All data in this manual is proprietary and may not be disclosed,
used or duplicated, for procurement or manufacturing purposes,
without prior written permission by VERSITRON.
VERSITRON LIFETIME WARRANTY
All VERSITRON products are covered by a Lifetime Warranty against defects in materials and
workmanship. This coverage is applicable to the original purchaser and is not transferable.
We repair, or at our option, replace parts/products that, during normal usage and operation, are proven
to be defective during the time you own the products, provided that said products and parts are still
manufactured and/or available. Such repair/replacement is subsequent to receipt of your product at
our facility and our diagnostic evaluation and review of the unit. Advance replacements are not
provided as part of the warranty coverage.
This warranty does not cover damage to products caused by misuse, mishandling, power surges,
accident, improper installation, neglect, alteration, improper maintenance, or other causes which are
not normal and customary applications of the products and for which they were not intended. No
other warranty is expressed or implied, and VERSITRON is not liable for direct, indirect, incidental
or consequential damages or losses.
In the unlikely event a warranty issue should arise, simply contact us at 302-894-0699 or
(RMA) number, along with instructions for returning your product.
www.versitron.com -3- SG71090
The information contained in this document is subject to change without prior notice.
Copyright (C) All Rights Reserved.
TRADEMARKS
Ethernet is a registered trademark of Xerox Corp.
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) This device must accept any interference received,
including the interference that may cause undesired operation.
CE NOTICE
Marking by the symbol indicates compliance of this equipment to the EMC directive of the European
Community. Such marking is indicative that this equipment meets or exceeds the following technical
standards:
EMC Class A
EN55022:2006/A1:2007
EN61000-3-2:2006
EN61000-3-3:1995/A1:2001/A2:2005 Class A
EN 55024:1998/A1:2001/A2:2003
IEC 61000-4-2:2001
IEC 61000-4-3:2002/A1:2002
IEC 61000-4-4:2004
IEC 61000-4-5:2001
IEC 61000-4-6:2003
IEC 61000-4-8:2001
IEC 61000-4-11:2001
www.versitron.com -4- SG71090
Table of Contents
1. Introduction......................................................................................................................................................5
1.1 Features................................................................................................................................. 6
1.2 Product Panels....................................................................................................................... 8
1.3 Optional Modules ................................................................................................................... 8
1.3.1 Optional Module Table...................................................................................................... 11
1.4 LED Indicators ..................................................................................................................... 11
1.5 Specifications....................................................................................................................... 11
2. Installation......................................................................................................................................................14
2.1 Unpacking ............................................................................................................................ 14
2.2 Safety Preautions................................................................................................................. 14
2.3 Installing Modules ................................................................................................................ 15
2.4 Removing the Modules ........................................................................................................16
2.5 Mounting the Switch............................................................................................................. 17
2.6 Applying AC Power ............................................................................................................ 18
2.7 Applying DC Power ............................................................................................................ 19
2.8 Reset Button ........................................................................................................................ 20
2.9 Making UTP Connections .................................................................................................... 20
2.10 Making SFP Fiber Connections ......................................................................................... 21
2.11 Making Fixed Duplex Fiber Connections ........................................................................... 22
2.12 Making Fixed Bi-Di (Bi-Directional) Fiber Connections...................................................... 23
2.13 LED Indications.................................................................................................................. 25
2.14 Making Console Connection .............................................................................................. 26
3. Managing the Switch.....................................................................................................................................27
3.1 IP Address & Password .......................................................................................................27
3.2 Configuring IP Address & Password via Web Interface....................................................... 27
3.3 Configuring IP Address & Password via console and telnet ................................................ 30
3.4 Reference Manuals for Web, Console, Telnet Management ............................................... 31
3.5 Configuration for SNMP Management ................................................................................. 31
3.6 SNMP MIBs ......................................................................................................................... 33
www.versitron.com -5- SG71090
1. Introduction
The SG71090 24-port Switch is a standard L2 switch that meets all IEEE 802.3/u/x/z Gigabit, Fast Ethernet
specifications. The switch provides three 8-port modular slots, each capable of accommodating one 8-port
module. A variety of modules are available, including 10/100/1000M copper, 100/1000M fiber optic SFP,
Copper and fiber optic SFP combination, and Fast Ethernet fiber optic modules. Different modules can be
installed to create flexibility within your network. The SG71090 automatically detects the types of modules
installed and configures the modules automatically. With a variety of modules and flexibility of installation, the
SG71090 can meet most network requirements.
The SG71090 supports Telnet CLI, Web GUI, SNMP and console management for switch stack management.
The network administrator can log into the switch to monitor and configure port operating mode, Quality of
Service, and powerful L2 switching functions such as VLAN, IGMP, RSTP, etc. In addition, the switch also
features powerful security functions such as SSH, HTTPS, IEEE 802.1x & MAC-based authentication, and
ACL control to make them suitable for office core applications.
The following image shows the SG71090 without modules installed.
Model Definition
Model Power Input Power connector
SG71090 AC 100 ~ 240V IEC320
SG71090-DC DC +48V Screw terminals
www.versitron.com -6- SG71090
1.1 Features
zFully modular design with three 8-port module slots supporting Gigabit and Fast Ethernet
zA variety of optional modules are available including Gigabit copper, Gigabit fiber, Gigabit mix of copper
and fiber, and Fast Ethernet fiber
zThe copper ports support 10/100/1000Mbps auto-negotiation and auto-MDI/MDI-X detection
zThe SFP ports can support both 100Mbps and Gigabit Ethernet SFP fiber optic SFP modules
zSupport connectivity for Fast Ethernet fiber, 100BASE-FX with SC/ST/BiDi/ transceivers
zFlexible installation with any combination of different modules
zProvides Gigabit full wire speed forwarding
zSupports power saving mode when port link is down or for different RJ-45 cable lengths
zSupports 802.3x flow control for full-duplex and backpressure for half-duplex
zSupports console and in-band Web/Telnet/SSH/HTTPS/SNMP interfaces for switch management
zSupports configurable maximum frame length from 1518 up to 9600 jumbo frame
zSupports port-based ,802.1Q tag-based VLAN and private VLAN
zProvides QoS function
zSupports port bandwidth control for ingress and egress
zSupports packets storm control function for broadcast, unicast and multicast
zSupports MAC address learning, ageing and filtering control
zSupports LACP port link aggregation
zSupports IEEE 802.1d, 802.1w, 802.1s STP (Spanning Tree Protocol), RSTP, MSTP
zProvides port mirroring function
zProvides IP Multicasting with IGMP Snooping function
zSupports DHCP client for dynamic IP configuration
zSupports 802.1X port-based radius authentication for access security
zProvides ACL filtering function
zProvides port data rate control function
zSupports SNTP Client
zSupports LLDP
zProvides SNMP v1/v2C/v3 agent and event trap function
zSupports Configuration download and upload
z19” rack mountable
zBoth AC powered and DC powered models are available
www.versitron.com -7- SG71090
Management Features:
zPort Control
-Port Speed/Duplex Mode/Flow Control/Power saving configuration
-Port frame size control (Jumbo frame support)
zQoS
-Traffic Classification up to 4 active priorities
-Port QoS configuration
-QoS Control List for policy rules
-Port bandwidth control for ingress and egress
-Storm Control for UC, MC and BC
zLayer2
-Auto MAC address learning and ageing
-Static MAC address filtering
-Port-based and 802.1Q Tag-based VLAN
-Link Aggregation - LACP
-Rapid Spanning tree - RSTP
-Port Mirroring
-IGMP snooping
-DHCP client for IP configuration
zSecurity features
-Access Control List for L2/L3 protocol filtering, ingress rate limit, port copy
-Port Access Control based on IEEE 802.1X
zManagement
-Web management
-Console CLI
-Telnet CLI
-Software Download via Web
-SNTP Client
-SNMP v1/v2c Agent
-SSH v2 & HTTPS
-Restore to default configuration
-Configuration download and upload
-System syslog
zSNMP MIBs
www.versitron.com -8- SG71090
1.2 Product Panels
The following figure illustrates the front panel and rear panel of the SG71090:
Model Front Panel Rear Panel (Power Input)
SG71090
SG71090-DC
1.3 Optional Modules
Module Part No. Image Specifications
SG71890
z8 10/100/1000 copper ports
z8 RJ-45 jacks
SG71896
z8-port 100/1000 SFP slots
zSupports standard 100M or
1000M fiber optic SFP
modules
www.versitron.com -9- SG71090
SG71896-44
z4 10/100/1000 copper ports
with RJ-45 connectors
z4 dual-speed SFP slots support
standard 100M or 1000M fiber
optic SFP modules
SG71894
SG71895
z8 fixed 100M fiber ports
z8 duplex SC connectors
zOptions:
SG71894: MMF 2km
SG71895: SMF 20km
SG71894-26
SG71895-26
z6 fixed 100M fiber ports with 6
duplex SC connectors
z2 10/100/1000 copper ports
with RJ-45 connectors
zFiber options:
SG71894-26: MMF 2km
SG71895-26: SMF 20km
SG71893
z8 fixed 100M fiber ports
z8 duplex ST connectors
zMMF 2km
SG71893-26
z6 fixed 100M fiber ports with 6
duplex ST connectors
z2 10/100/1000 copper ports
with RJ-45 connectors
www.versitron.com -10- SG71090
SG71895-SFA
SG71895-SFB
z8 fixed 100M fiber ports with
SC connectors
zFull-Duplex Bi-directional
communication over a
single-fiber
zOptions:
SG71895-SFA:
Tx: 1310nm, Rx: 1550nm
SG71895-SFB:
Tx: 1550nm, Rx: 1310nm
zSMF 20km
SG71895-26SFA
SG71895-26SFB
z6 fixed 100M fiber ports with
SC connectors
z2 10/100/1000 copper ports
with RJ-45 connectors
zFull-Duplex Bi-directional
communication over a
single-fiber
zOptions:
SG71895-26SFA:
Tx: 1310nm, Rx: 1550nm
SG71895-26SFB:
Tx: 1550nm, Rx: 1310nm
zSMF 20km
Tabla de contenidos
Otros manuales de Cambiar de Versitron
Versitron
Versitron SG09108 Manual de usuario
Versitron
Versitron SG10208 Manual de usuario
Versitron
Versitron S71650 Manual de usuario
Versitron
Versitron SG24816M Manual de usuario
Versitron
Versitron SF71060M Manual de usuario
Versitron
Versitron SG70660M Manual de usuario
Versitron
Versitron SGX368244M Manual de usuario
Versitron
Versitron S72450 Manual de usuario
Versitron
Versitron Web Smart+ SG71070M Manual de usuario
Versitron
Versitron SG70660M Manual de usuario
