Installation Guide
Accessories
Z20
6880-0A
Page 1 of 2 ©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 / suppor[email protected] 1214 Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
NOTICE
• This product is a Class 2 device.
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classied locations.
•
Read and understand the instructions before installing this product.
• Turn o all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
No responsibility is assumed byVeris Industries for any consequences arising out of the
use of this material.
Product Identification
Product Overview
The AA10 Series temperature-to-current transmitter is designed for use with 100R platinum, 1k platinum, 10k Type
2, and 10k Type 3 external resistive output devices. When the resistive output from the external device is connected
to the AA10 input terminal, the resistive value is converted to a 4-20 mA signal compatible with most building
control systems.
AA10 Series
Temperature Transmier,
Resistive to 4-20mA
Specifications
Current Loop Class 2; 2-wire, loop powered 4-20mA; 9-30VDC
Transmitter Accuracy ±1% of span or ±0.1ºC, whichever is greater
(does not include accuracy of resistive element in external
temperature device)
Transmitter Operating Temperature
Range
-15° to 50°C (5° to 122°F)
Connectors 2 pluggable terminal block connectors
Encapsulation Epoxy encapsulated
AA10
C = Celsius
F = Farenheit
= (choose a valid
temp value)
= (choose a valid
temp value)
Sensor Type Bottom Range Temp Top Range TempTemp Scale
4-20mA Temperature Sensor Range*
* Temperature range must be whole numbers where the bottom value is less
than the top value in the range of -25°C to 105°C (-13°F and 221°F).
B = 100R platinum, RTD
C = 1k platinum, RTD
D = 10k T2, Thermistor
H = 10k T3, Thermistor
W = 10k T2 high accuracy, Thermistor
Y = 10k T3 high accuracy, Thermistor
RoHS
Compliant
