Veldo Teknoloji NEW PRO + STEP Manual de usuario
Veldo SSH 2019 1
NEW PRO +
STEP
124
INSTALLATION TIME
1 – 2 HOURS
Professional installation
recommended
ARRANTY PERIOD
2 YEARS
DIFFICULTY LEVEL
Veldo SSH 2019 2
EQUIPMENT LIST
Protective glasses
Ratchet wrench and
arms
Cable stripper
Allen key utensil
Electrical insulating
strap
Pliers
8 mm spanner
13 mm spanner
10 mm spanner
Drill
10 mm drilling bit
3
- Parts
Step
Veldo SSH 2019 3
Control Unit
Rear Connection Bracket
Front Connection Bracket
- Connection Components
M5x32 trapezoid screw
Front and rear step connection bolt M6x16
Veldo SSH 2019 4
Template
- Electrical diagram and Components
Veldo SSH 2019 5
Control Unit Socket
Switch Socket
Supply Socket
Step Engine Socket
Step Chassis Socket
- Wiring Installation
Before installation, the fuse on the installation is
removed from the place. !!!!
Veldo SSH 2019 6
1
3
4
2
iring and control unit installation is made in the
compartment under the front passenger seat.
For connections of the installation under
the vehicle, the installation is taken from
the hole under the front passenger seat to
the underside of the vehicle.
** In vehicles that do not have holes,
drilling must be done to pass the
installation.
Ø38mm punch ile delme işlemi yapılır.
- Wiring Installation
Veldo SSH 2019 7
For switch mounting, Ø 11
mm hole is drilled.
Middle and front door switch
connections are made to the
region seen in the picture.
ith the smart mounting
screw, the assembly is done.
- Mechanic Installation
Veldo SSH 2019
1
For the front carrier foot connection,
the vehicle’s original chassis hole is
used.
For the rear carrier foot connection,
the vehicle’s original chassis hole is
used.
2
The completed version of the front and
rear carrier foot connection is as in the
picture. 3
- New Feat re
Veldo SSH 2019
1
If the step is opened and does not
close ( due to any faults or factors )
The connecting U_clips of the feet
below the Step are removed by hand.
2
The step that remains open can be
closed by hand by removing the
U_clips. 3
Veldo SSH 2019 10
hen starting installation, replace the fuse that we have removed
from the installation. After replacing the fuse, check the step
operation.
- Final Control
Tabla de contenidos
Otros manuales de Accesorios para automóviles de Veldo Teknoloji
