VECTECH ET9181 Manual de usuario
VECTECH ET9181
Desktop Soldering
Machine
Instruction Manual
Thanks for purchasing our product! Read this book carefully before
operation, please store it in a safety and available place for future
reference.
3
Content
1. Safety Labels ................................................................................. 5
2. Characteristic ................................................................................. 7
2.1
Feature ..................................................................................... 7
2.2
Technical Data .......................................................................... 8
2.3
Dimension ................................................................................. 9
3. Functional Description.................................................................. 10
3.1
Introduction ............................................................................. 10
3.2
Operation Keys Introduction ................................................... 11
4. Connection and Pin Function ....................................................... 13
4.1
Connection ............................................................................. 13
4.2
Pin Function ............................................................................ 13
4.2.1 2-pin Socket Introduction ..................................................... 13
4.2.2 6-pin Socket Introduction ..................................................... 14
5. Menu Introduction ........................................................................ 15
5.1
Main Menu .............................................................................. 15
5.2
Setup Menu ............................................................................ 16
5.2.1 Temperature ......................................................................... 16
5.2.2 Z Speed ............................................................................... 17
5.2.3 Tin Speed ............................................................................. 17
5.2.4 Pre-tin .................................................................................. 18
5.2.5 Z Height ............................................................................... 19
5.2.6 Heat Time ............................................................................ 19
5.2.7 Pre-tin Back ......................................................................... 20
5.2.8 Tin Feeding .......................................................................... 20
5.2.9 Solder Time .......................................................................... 21
5.2.10 Solder Time .......................................................................... 21
4
5.2.11 Lift Height ............................................................................. 22
5.2.12 Temp. Unit ............................................................................ 22
5.2.13 Password ............................................................................. 22
5.2.14 Language ............................................................................. 23
5.3
Calibration Menu ..................................................................... 24
6. Commissioning ............................................................................ 25
6.1
Preparation ............................................................................. 25
6.2
Installation .............................................................................. 25
6.3
Beginning Program ................................................................. 25
7. Troubleshooting and Maintenance ............................................... 30
7.1
Troubleshooting ...................................................................... 30
7.2
Maintenance ........................................................................... 30
7.2.1 Wire Feeder Device ............................................................. 30
7.2.2 Soldering Tip ........................................................................ 30
7.2.3 Prolong the Lifetime of Soldering Tip ................................... 30
5
1. Safety Labels
Serious warning
The product poses a risk of electric shock.
Only authorized person can change settings.
Push the red emergency switch for power off in an emergency
situation.
Forbid working while the power wire was damaged.
If the device remains unused for a long time, please pull the power
cord out of power socket.
During maintenance and inspection of the machine, attention power
status and pull out the power plug of the controller.
Install a Frame Ground to prevent electric shock.
There is a dangerous voltage inside the device! Only be authorized by
the experienced and be an expert can repair the equipment, or contact the
agents, manufactures, when the system fails to repair.
Do not plug or unplug cables during power. The power cable should
be plug when the machine has long time to be used or idle.
Risk for injury.
Do not extend your body to machine when it works well or powers on.
Do not wet and disassemble the machine when used. Also do not pull
power cord.
Please keep the machine and table clean, which will help reduce
accidents.
Unprofessional person can not change arbitrarily. When performing
maintenance, please turn off the power supply and air pressure.
This product is non-explosion-proof and is strictly prohibited for
potential explosive environment.
Make sure that the heating controller parts are securely fastened to
the machine before using it.
Flammable and explosive objects or gas solvents are strictly
prohibited in the working area.
Warning
6
Do not move the movements by hands to avoid damaging the
machine.
Do not touch the moving parts in your work, or you may damage the
machine or accident.
During the operation of the machine, please do not put your hand
into the device, which may cause the user to get injured or cause substantial
damage to the object involved.
During the suspension of the machine, please check the condition
carefully for manual operation, otherwise it may cause the user to get
injured or cause substantial damage to the object involved.
The product must be used or stored in an applicable environment.
Working ambient temperature is 0~40℃, relative humidity is
20%~90%.
The equipment is heavy and huge, do not pile up.
Do not pile up items in the scope of the machine
Before moving and carrying, make sure the movements is fixed (for
example the X-axis may be fixed by sheet metal or lines for safety).
Unfold the packaging, before using the machine, make sure the
movements’ fixture (for example the Z-axis may be fixed by sheet metal or
lines for safety) is torn down.
Regularly inspect and maintain will increase durability and
performance.
Must operate the machine by standard procedure.
Before starting a repetitive operation, make sure that there is no
obstacle in the machine’s working area.
Please use machine within the standard requirements (such as voltage,
air pressure, power frequency) as stated in the specification.
Make sure the air source is clean and dry.
Suggest the air pressure is less than 0.7Mpa.
Attention
Do not throw the packaging and foamed plastic.
If the machine should come back to the manufacture or agency, it
must be folded by initial package.
The machine must be placed vertically.
The machine can be packet after fold by foamed plastic.
The machine can not get wet in transit or stored procedures.
7
2. Characteristic
The machine is automatic feeder device with adjustable soldering parameters,
and it is easy to be used.
2.1 Feature
Heat and cool rapidly
Equipped with foot pedal.
Adjustable program speed/time, tin feeding/interval etc.
Suitable for use with a wide variety of fixtures.
8
2.2 Technical Data
Type QUICK ET9181
Power consumption 280W
Input voltage 220V AC
Temperature range 100～550℃
Temperature stability ±3℃
Available Tin Dia. 0.5、0.6、0.8、1.0、1.2、1.4、1.6（mm）
Driver mode Motor
Feeder type Foot pedal / Manual
Soldering iron type 9018MG
Dimension（L*W*H） 285*420*265mm
Weight About 13kg
9
2.3 Dimension
Front view
Left View
Unit: mm
285
420
265
10
3. Functional Description
3.1 Introduction
Wire feeder device
Baseplate Foot pedal
LCD
Operation keys
Soldering iron
2-pin socket
6-pin socket
Power socket
Tin roll
Fume hose connector
Z Axis module
Tin tube
Tabla de contenidos
Otros manuales de Pistola de soldar de VECTECH
Manuales populares de Pistola de soldar de otras marcas
Velleman
Velleman HRJA151 Manual de usuario
Weller
Weller WSM 1 Manual de usuario
Vishay Precision Group
Vishay Precision Group Micro-Measurements Mark V Instrucciones de montaje
ersa
ersa i-CON 1V Manual de usuario
Hakko Electronics
Hakko Electronics FX-100 Manual de usuario
Weller
Weller WAD 101 Manual de usuario
