Vaxcel T0449 Manual de instrucciones

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

.stnemeriuqergnidnuorgdnagniriwrofsedoclacirtcelelacoltlusnoc,gnillatsnierofeB.1:SETON

2. READ AND SAVE THESE INSTRUCTIONS.

T0449

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

181017

Hex Nut (F)

Washer (G) Rubber Pad (H)

End Cap (I)

Fitter Screw (A) Wire Connector (B)

Hardware Package (inculded):

Turn off the power at fuse or circuit box.

Installation Steps

Bulb Type B MAX 60W

(not included)

Handle

Roundhead Screw

Flathead Screw

Fixture body

Socket Tube

Cover Assembly

Fitter Screw (A)

Grounding Wire

Wire Connector (B)

Post

1. Unscrew the roundhead screws and

flathead screws to remove the handle from

the cover assembly and to remove the

cover assembly from the fixture body.

2. Place the socket tubes onto the sockets

to cover the sockets completly.

3. Install bulbs (not included). See relamping

label at socket area or packaging for

maximum allowed wattage.

4. Restore the handle and cover assembly

to the fixture body by the roundhead screws

and flathead screws.

5. Unscrew the fitter screws (A) to remove the

fixture body away from the fitter.

6. Pull out the wires and grounding wire from the post.

Make wire connections using the wire connectors (B):

---The black wire from the fixture to the black

wire from the post.

---The white wire from the fixture to the white wire

from the post.

---The grounding wire from the fixture to the

grounding wire from the post.

Carefully put the wires back into the post.

IMPORTANT:

The sensor has an excellent photocell

function to enable the light to turn on

at dusk and off at dawn automatically.

181017

1. Attach the nipple (D) to the mounting strip (A), then secure it with a washer (G) and hex nut (F).

2. Attach the mounting strip (A) to the outlet box by using two mounting screws (B).

3. Pull out the outlet wires and house grounding wire from the outlet box. Make wire connections using the wire

connectors (F):

---The black wire from the fixture to the black wire from the power source.

---The white wire from the fixture to the white wire from the power source.

---Attach the fixture grounding wire to the mounting strip (A) with the green grounding screw (E). Then connect it to

the house grounding wire with a wire connector (F).

Carefully put the wires back into the outlet box.

4. Attach the fixture to the mounting strip (A) by inserting the nipple (D), then secure it with the rubber pad (H) and end

cap (I).

CAUTION: With silicone caulking compound, caulk completely around where the back plate meets

with the wall surface to prevent water from seeping into the outlet box.

5. Install a bulb (not included). See relamping label on socket area or packaging for maximum allowed wattage.

Turn on the power at fuse or circuit box.

1. Turn off the power at fuse or circuit box before starting installation.

2. Unscrew the three set screws to remove the plate from the fitter.

3. Loosen the wire connectors connected with the wires from photocell. (See Fig.1)

Note: Do not move the photocell to prevent water from seeping into the post.

4. Take a white pigtail and black pigtail and make wire connections using wire connectors (B): (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the post.

5. Restore the plate to the fitter by using three set screws.

Photocell

White Wires From

Photocell

Wire Connector

Black Wire From

Fixture

Wires From Fixture

Wires From

Main Power

Wire Connector (B)

White Pigtail

Pigtail

Red Wires From

Photocell

Black Wires From

Photocell

Operation the Unit Without Photocell

Fig.1 Fig.2

White Wire From

Fixture

Plate

Set Screw

The following parts are available for re-order if damaged or missing.

Fitter Screw (A) Wire Connector (B)

Socket Tube

1089C

Mounting Hardware

6012MM(1 SET)

Spare Parts List:

A: 10"

B: 25"

7. Place the fitter on the top of the post, and then secure it with fitter screws (A).

CAUTION: With silicone caulking compound, caulk completely around where the fitter meets with the post

surface to prevent water from seeping into the post.

Otros manuales de Luz exterior de Vaxcel

Vaxcel

Vaxcel Mission T0437 Manual de instrucciones

Vaxcel

Vaxcel T0698 Manual de instrucciones

Vaxcel

Vaxcel T0062 Manual de instrucciones

Vaxcel

Vaxcel T0454 Manual de instrucciones

Vaxcel

Vaxcel T0364 Manual de instrucciones

Vaxcel

Vaxcel T0599 Manual de instrucciones

Vaxcel

Vaxcel T0571 Manual de instrucciones

Vaxcel

Vaxcel T0694 Manual de instrucciones

Vaxcel

Vaxcel T0517 Manual de instrucciones

Vaxcel

Vaxcel T0199 Manual de instrucciones

Vaxcel

Vaxcel T0442 Manual de instrucciones

Vaxcel

Vaxcel T0396 Manual de instrucciones

Vaxcel

Vaxcel T0503 Manual de instrucciones

Vaxcel

Vaxcel T0294 Manual de instrucciones

Vaxcel

Vaxcel T0698 Manual de instrucciones

Vaxcel

Vaxcel T0692 Manual de instrucciones

Vaxcel

Vaxcel T0568 Manual de instrucciones

Vaxcel

Vaxcel T0669 Manual de instrucciones

Vaxcel

Vaxcel T0371 Manual de instrucciones

Vaxcel

Vaxcel T0395 Manual de instrucciones

Vaxcel

Vaxcel T0572 Manual de instrucciones

Vaxcel

Vaxcel T0414 Manual de instrucciones

Vaxcel

Vaxcel T0696 Manual de instrucciones

Vaxcel

Vaxcel T0595 Manual de instrucciones

Manuales populares de Luz exterior de otras marcas

Sealey

Sealey LED37 Manual de usuario

nordlux

nordlux VEJERS Guía del usuario

SImx

SImx ELITE LED LHTC637 Manual de usuario

GEV

GEV CAROLINE 10833 Manual de usuario

NEBO

NEBO NEB-LSP-0020 Manual de usuario

WE-EF

WE-EF PFL540 LED Manual de usuario

Lindby

Lindby 9949029 Manual de usuario

HEPER

HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento

HEPER

HEPER LW8034.003-US Instrucciones de instalación y funcionamiento

Maretti

Maretti VIBE S 14.6080.04.A Manual de usuario

BEGA

BEGA 84 253 Manual

HEPER

HEPER MINIMO Instrucciones de instalación y funcionamiento

LIGMAN

LIGMAN BAMBOO 3 Manual de usuario

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manual de usuario

urban ambiance

urban ambiance UQL1273 Manual de usuario

TotalPond

TotalPond 52238 Manual de usuario

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manual de usuario