Vaxcel T0395 Manual de instrucciones

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

95303T

Mounting Screw (B) Wire Connector (F) Ball Nut (G) Rubber Pad (H)

Cross Bar (A) Green Grounding

Screw (C)

Headless

Screw (D)

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Hardware Package (included):

IMPORTANT:

The sensor has an excellent photocell function to enable

the light to turn on at dusk and off at dawn automatically.

Turn off the power at fuse or circuit box

Installation Steps

1. Thread two headless screws through the cross bar, and then secure them

with four lock nuts. Adjust the length of the headless screws if necessary.

Note: Make sure that the headless screws are lined up horizontally to make

the fixture level.

2. Attach the cross bar to the outlet box by using two mounting screws.

3. Pull out the source wires from the outlet box. Make wire connections using wire connector as follows:

---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.

---Connect the neutral wire (usually white insulation) from the fixture to the white wire from the power source.

---Attach the fixture grounding wire (usually green insulation or bare wire) to the cross bar with the green grounding

screw, and then connect it to the house grounding wire with the wire connector.

Carefully put the wires back into the outlet box.

4. Attach the fixture body to the cross bar by inserting headless screws into holes on back plate, and then secure it with

two rubber pads and two ball nuts.

NOTE:With silicone caulking compound, caulk completely around where the back plate meets with the wall

surface to prevent water from seeping into the outlet box.

Bulb Type A Max.60W

(not included)

Back Plate

Photocell

Fixture Body

House Grounding Wire

Green Grounding Screw(C)

Fixture Grounding Wire

Wire Connector(F)

Headless Screw(D)

Outlet Box

Fixture Wire

Lock Nut(E)

Cross Bar (A)

Ball Nut (G)

Rubber Pad (H)

Mounting Screw(B)

171221

Lock Nut (E)

5. Install a bulb (not included). Check relamping label at socket area or packaging for maximum allowed wattage.

Turn on the power at fuse or circuit box.

Assembly Kit

5813MM (1SET)

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Turn on the power at fuse or circuit box

Mounting Screw (B)

Wire Connector (F) Ball Nut (G) Rubber Pad (H)

Cross Bar (A) Green Grounding

Screw (C)

Headless

Screw (D)

1. Turn off the power at the main fuse or circuit breaker box before starting installation.

2. Loosen the wire connector connected with the wires from photocell. (See Fig.1)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire connector: (See Fig.2)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Wires From Fixture

Wires From

Main Power

Wire Connector

Pigtail

Operation the Unit Without Photocell

Fig.2

171221

Lock Nut (E)

A:5″

B:11″

C:6″

Photocell

White Wires From Photocell

Wire Connector

Wires From Fixture White Pigtail

Red Wires From Photocell

Black Wires From Photocell

Fig.1

Wires From Fixture

Wires From

Main Power

Wire Connector

Pigtail

Fig.2

Otros manuales de Luz exterior de Vaxcel

Vaxcel

Vaxcel T0238 Manual de instrucciones

Vaxcel

Vaxcel T0244 Manual de instrucciones

Vaxcel

Vaxcel T0649 Manual de instrucciones

Vaxcel

Vaxcel T0103 Manual de instrucciones

Vaxcel

Vaxcel T0692 Manual de instrucciones

Vaxcel

Vaxcel T0193 Manual de instrucciones

Vaxcel

Vaxcel T0449 Manual de instrucciones

Vaxcel

Vaxcel T0085 Manual de instrucciones

Vaxcel

Vaxcel T0172 Manual de instrucciones

Vaxcel

Vaxcel T0692 Manual de instrucciones

Vaxcel

Vaxcel T0594 Manual de instrucciones

Vaxcel

Vaxcel T0274 Manual de instrucciones

Vaxcel

Vaxcel T0435 Manual de instrucciones

Vaxcel

Vaxcel T0698 Manual de instrucciones

Vaxcel

Vaxcel T0181 Manual de instrucciones

Vaxcel

Vaxcel T0099 Manual de instrucciones

Vaxcel

Vaxcel Proline T0429 Manual de instrucciones

Vaxcel

Vaxcel T0647 Manual de instrucciones

Vaxcel

Vaxcel T0142 Manual de instrucciones

Vaxcel

Vaxcel T0696 Manual de instrucciones

Vaxcel

Vaxcel T0258 Manual de instrucciones

Vaxcel

Vaxcel T0246 Manual de instrucciones

Vaxcel

Vaxcel X0090 Manual de instrucciones

Vaxcel

Vaxcel T0365 Manual de instrucciones

Manuales populares de Luz exterior de otras marcas

Sealey

Sealey LED37 Manual de usuario

nordlux

nordlux VEJERS Guía del usuario

SImx

SImx ELITE LED LHTC637 Manual de usuario

GEV

GEV CAROLINE 10833 Manual de usuario

NEBO

NEBO NEB-LSP-0020 Manual de usuario

WE-EF

WE-EF PFL540 LED Manual de usuario

Lindby

Lindby 9949029 Manual de usuario

HEPER

HEPER DOGO Side LW6048.585-US Instrucciones de instalación y funcionamiento

HEPER

HEPER LW8034.003-US Instrucciones de instalación y funcionamiento

Maretti

Maretti VIBE S 14.6080.04.A Manual de usuario

BEGA

BEGA 84 253 Manual

HEPER

HEPER MINIMO Instrucciones de instalación y funcionamiento

LIGMAN

LIGMAN BAMBOO 3 Manual de usuario

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Manual de usuario

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Manual de usuario

urban ambiance

urban ambiance UQL1273 Manual de usuario

TotalPond

TotalPond 52238 Manual de usuario

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Manual de usuario