Vantec vantec NST-D300S3 Manual de usuario
Copyright © 2010 Vantec Thermal Technologies. All Rights Reserved.
All Registered Trademarks Belong To Their Respected Companies.
Model:NST-D300S3
User’s Manual
SATA to SuperSpeed USB 3.0
www.vantecusa.com
1
■
Table of Contents
Introduction
System Requirements
Specications/Features
Installation
Removal
Creating a Partition
For Windows XP/Vista/7 Users
For Mac Users
Warranty
1.
2.
3.
4.
5.
6.
7.
.................................................................................................................2
...............................................................................................2
............................................................................................3
....................................................................................................................4
.........................................................................................................................7
....................................................................................................9
...........................................................................9
........................................................................................................10
......................................................................................................................12
2
1.Introduction
The Vantec NexStar® SuperSpeed USB 3.0 Hard Drive Dock is a complete and easy way to add or swap hard
drives with your computer. Integrated with the latest USB 3.0 technology, performance is increased by 10
fold oering maximum speeds of up to 5 Gbps. The need of opening up your computer case or installing
the hard drive into an enclosure is now a distant memory. Simply insert any 2.5” or 3.5” SATA I/II hard drive
into the Hard Drive Dock and you are ready to transfer, copy, or backup les. The NexStar® SuperSpeed
USB 3.0 Hard Drive Dock is the perfect solution to access any hard drives in seconds.
2.System Requirements
Microsoft Windows XP/Vista/7 (32/64bit)
Mac OS X 10.4 & Greater
For USB 2.0 speeds, the system must support USB 2.0 specications
For USB 3.0 speeds, the system must support USB 3.0 specications.
CD-ROM drive (if drivers are needed)
■
■
■
■
■
3
3.Specifications/Features
Features :
Install and Access Hard Drives in Seconds
Simple to Use Design; No Screws Needed
Eject Button for Easy Removal of Hard Drive
Compatible with 2.5” or 3.5” SATA I/II Hard Drive
Maximum Transfer Rates Up to 5 Gbps w/USB 3.0
Maximum Transfer Rates Up to 480 Mbps w/USB 2.0
Backwards-Compatible with USB 2.0 or 1.1
Hi-Quality Shielded USB 3.0 Cable Ensures Data
Integrity and Speed
Hot-Swappable: Plug & Play Without Rebooting
Attractive Blue LED Indicates Power & HDD Activity
■
■
■
■
■
■
■
■
■
■
■
Specications :
Model
Device Support
Device Size
Internal Interface
External Interface
Material
Dimension
HDD Capacity
Power Supply
: NST-D300S3
: SATA I/II Hard Drive
: 2.5” or 3.5”
: SATA
: USB 3.0
: Plastic
: 136 x 83 x 87mm
: Up to 2TB
: AC Adapter
■
■
■
■
■
■
■
■
■
NexStar® SuperSpeed USB 3.0 Hard Drive Dock
USB 3.0 Cable (3ft)
Power Adapter
User’s Manual
■
■
■
■
Package Includes :
4
4.Installation
Connect the power adapter to the NexStar® Hard Drive Dock.
Connect the USB 3.0 Cable to the NexStar® Hard Drive Dock and attach the other end to your computer.
1.
2.
Power
Cable
USB 3.0
Cable
5
3. Insert 2.5” or 3.5” SATA HDD into the slot.
6
3-1. When the eject button is upright, the NexStar® Hard Drive Dock is ready for use.
7
4.Removal
First, safely remove the USB HDD device from your computer operating system.
Once safe removal has been completed, proceed to turn o the power to the Hard Drive Dock
and eject the HDD.
1.
2.
Warning: Please push power button & turn o unit before removing the hard drive!
(Stablize the HDD with your hand)
8
3. Remove the HDD from the Hard Drive Dock.
9
6.Creating a Partition
For Windows® XP/Vista/7 Users:
Right click on “My Computer” and choose “Manage”.
Under “Storage” on the LEFT pane, select “Disk Management”.
Windows should now give you the option to initialize the disk. If not, locate the new disk, right-click on
the new disk (where it reades “Disk #”) and choose Initialize. This step may not be required for some
hard drives.
Go through the wizard.
Once complete, locate your hard drive in the bottom right pane. Right-click on the area with a status
bar (to the right of the “Disk#” area) and choose New Partition.
1.
2.
3.
4.
5.
NOTE :
Most hard drives should come with a CD that includes an installation program. If not, a download should be
available from the manufacturer's website. The best way to partition a new hard drive is by using the
manufacturer’s program. Please refer to your hard drive’s documentation for further information on format-
ting or partitioning the hard drive.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Estación de acoplamiento de Vantec
Vantec
Vantec DSH-200U2 Manual de usuario
Vantec
Vantec DSH-300U3 Manual de usuario
Vantec
Vantec DSH-100U2 Manual de usuario
Vantec
Vantec DSH-M100U3 Manual de usuario
Vantec
Vantec NexStar NST-D100S2-BK Manual de usuario
Vantec
Vantec NexStar Manual de usuario
Vantec
Vantec DSH-200U2 Manual de usuario
Vantec
Vantec DSH-300U3 Manual de usuario
Vantec
Vantec Vantec NST-D100SU Manual de usuario
Vantec
Vantec NextStar NST-D100S2 Manual de usuario
