Vanderbilt Eventys CCDM2010-OIRD Manual de usuario
IP 2MP Speed Dome 23x
Eventys CCDM2010-OIRD
Quick start guide
Document ID: C-301501
Edition: 01.05.2017
Copyright
Technical specifications and availability subject to change without notice.
© Vanderbilt 2017
We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient
acknowledges these rights and undertakes not to publish the document nor the subject thereof in full or in part,
nor to make them available to any third party without our prior express written authorization, nor to use it for any
purpose other than for which it was delivered to him.
© Vanderbilt 2017
3
Table of contents
1. About this Manual..................................................................................................................................................4
2Overview .................................................................................................................................................................9
2.1 Overview of IP 2MP Speed Dome 23x.....................................................................................................9
3Installation ............................................................................................................................................................10
3.1 Wall Mounting .........................................................................................................................................11
4Setting the Dome over the LAN...........................................................................................................................16
4.1 Wiring......................................................................................................................................................16
4.2 Activating the Speed Dome ....................................................................................................................16
4.3 Activation via Web Browser....................................................................................................................17
4.4 Activation via Eventys IP Search Tool ....................................................................................................18
4.5 Modifying the IP Address........................................................................................................................19
5Accessing by Web Browser ................................................................................................................................20
© Vanderbilt 2017
4
1.About this Manual
This Manual is applicable to IP 2MP Speed Dome 23x zoom.
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is subject
to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company
website
Please use this user manual under the guidance of professionals.
Legal Disclaimer
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
© Vanderbilt 2017
5
1.1 Regulatory Information
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2014/30/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more
information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg).
For proper recycling, return the battery to your supplier or to a designated collection point. For more information
see: www.recyclethis.info
© Vanderbilt 2017
6
1.2 Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
●Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
●In the use of the product, you must be in strict compliance with the electrical safety regulations of the
nation and region. Please refer to technical specifications for detailed information.
●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
24VAC or
12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed
information.
●Do not connect several devices to one power adapter as adapter overload may cause over-heating or a
fire hazard.
●Please make sure that the plug is firmly connected to the power socket.
●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and
then please contact the service center.
●It is mandatory, to fit the safety belt properly whist the installation of the dome to avoid that the dome
falls down in both cases: whilst the installation work and in normal mode of operation.
1.3 Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Unit is designed for indoor use only.
•Keep all liquids away from the device.
•Ensure environmental conditions meet factory specifications.
•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it
may cause damage to the sensitive electronics within the unit.
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.
© Vanderbilt 2017
7
•Use the device in conjunction with an UPS if possible.
•Power down the unit before connecting and disconnecting accessories and peripherals.
•A factory recommended HDD should be used for this device.
•Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
1.4 Power Supply
•Ensure that the AC power supply is stable and within the rated voltage of the unit. Use an uninterrupted
power supply (UPS) to ensure a continuous function of the unit in the event of power dips on the AC mains
supply. Suitable UPS devices can be ordered within the local IT market, e.g. APC SMT2200I or others.
1.5 Applicable Models
This manual is applicable to the models listed in the following table.
Order number
Model
V54561-C147-A100
CCMD2010-OIRD, Eventys IP 2MP Speed Dome 23x zoom
1.6 Available accessories (for reference)
Order number
Model
N54561-M113-A100
CCMD2010-WM Wall mount
N54561-M114-A100
CCMD2010-VPM, Vertical pole mount
N54561-M115-A100
CCMD2010-CM, Corner Mount
N54561-M116-A100
CCMD2010-WMPB, Wall mount with power box
N54561-M117-A100
CCMD2010 VPMJB, Vertical pole mount with junction box
N54561-M118-A100
CCMD2010-WMJB, Wall mount with junction box
N54561-M119-A100
CCMD2010-GM Gooseneck mount
N54561-M120-A100
CCMD2010-PM Pendant mount
N54561-M121-A100
CCMD2010-PML, Pendant mount long
N54561-M122-A100
CCMD2010-CMA, Ceiling mount
N54561-M123-A100
CCMD2010-PWM, Parapet wall mount
© Vanderbilt 2017
8
1.7 Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicates a potentially hazardous situation, which if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Provides additional information to emphasize or supplement
important points of the main text.
© Vanderbilt 2017
9
2 Overview
Please turn the power off before connect the cables.
The cables are distinguished by different colors. The labels attached on the cables are for identification.
The figures below are for reference only, please refer to the actual product as the standard.
2.1 Overview of IP 2MP Speed Dome 23x
1
2
3
4
5
6
7
8
9
Figure 2-1 Cable Interface of CCMD2010-OIRD
Table 2-1 Descriptions of Cable Interface
No.
Description
1
Network Cable
2
Video Cable
3
Alarm Out
4
Audio Cable
5
Alarm In
6
RS-485
7
Power Cable
8
SD Card Slot
9
Head Cover
© Vanderbilt 2017
10
3 Installation
Before you start:
●Make sure the device in the package is in good condition and all the assembly parts are included.
●The standard power supply is 12V DC or 24V AC, please make sure your power supply matches with
your speed dome.
●Make sure all the related equipment is power-off during the installation.
●Check the specification of the products for the installation environment.
●Make sure that the wall is strong enough to withstand four times the weight of the speed dome and the
bracket.
For the speed dome that supports IR, you are required to pay attention to the following precautions to prevent IR
reflection:
●Dust or grease on the dome cover will cause IR reflection. Please do not remove the dome cover film
until the installation is finished. If there is dust or grease on the dome cover, clean the dome cover with
clean soft cloth and isopropyl alcohol.
●Make sure that there is no reflective surface too close to the lens. The IR light from the speed dome
may reflect back into the lens causing reflection.
Do not drag the speed dome with its waterproof cables as shown below, otherwise the waterproof performance
is affected.
Figure 3-1 Do not drag the cables
Tabla de contenidos
Otros manuales de Cámara de seguridad de Vanderbilt
Vanderbilt
Vanderbilt CCMS2010-IR Manual de usuario
Vanderbilt
Vanderbilt CCPW3025-IR Manual de usuario
Vanderbilt
Vanderbilt CFMW2035 Manual de usuario
Vanderbilt
Vanderbilt CCMD2010-OIR Manual de usuario
Vanderbilt
Vanderbilt CCPW3025-IR Manual de usuario
Vanderbilt
Vanderbilt CCMS2010-IR/IRW Manual de usuario
Vanderbilt
Vanderbilt CFMW3025 Hoja de instrucciones
Vanderbilt
Vanderbilt CCID1445-DN28 Manual de usuario
Vanderbilt
Vanderbilt CCPS1317-LPOIR Guía rápida
