Valor Fires 809 Instrucciones de uso

5116990/04

INSTALLER AND OWNER GUIDE

Model809

Electric Heater

fitted with one of the following fascia.

Aura 2, Blenheim, Camden,

Canberra, Debut, Flare,

Homeflame Slimline, Otago,

Seattle, Sonnet or Traditional.

G.C. No.EF-032-19

This guide is intended to help you

install and care for your Valor Fires

electric heater. Please read carefully

before installing and using your

heater. However, if further information

is required, our

Valor Fires Technical Helpline

will be pleased to help.

Telephone 08706 061 065

(National call rates apply in the

United Kingdom)

In the Republic of Ireland

Telephone 0044 8706 061 065

Important: Please keep your guide in a safe place for future reference

(including photocopying), stored in any medium by electronic means (including in any

retrieval system or database) or transmitted, in any form or by any means, whether

electronic, mechanical, recording or otherwise, without the prior written permission of

the copyright owner.

Applications for the copyright owner's permission to reproduce any part of this

publication should be made, giving details of the proposed use, to the following

address: The Company Secretary, Baxi Heating UK Limited, The Wyvern Business

Park, Stanier Way, Derby, DE21 6BF.

Warning: Any person who does any unauthorised act in relation to a copyright work

may be liable to criminal prosecution and civil claims for damages.

CUSTOMER CARE

Thank you for choosing Valor Fires

All Valor Fires heaters are designed to meet the most stringent quality, performance

and safety requirements to provide our customers with many years of trouble free

service. This guide aims to improve your understanding and appreciation of your new

Valor Fires heater, by providing simple and informative instructions to enable you to

install it and to ensure that you benefit from the excellent performance and features it

has to offer.

If you require further assistance, the Valor Fires Technical Helpline will be pleased to

help.

Please telephone 08706 061 065

(local rates apply in the United Kingdom). In the

Republic of Ireland please telephone 0044 8706 061 065

FOR OTHER USEFUL TELEPHONE NUMBERS SEE PAGE 15 OF THIS GUIDE

Valor Fires, Erdington, Birmingham B24 9QP

www.firesandstoves.co.uk

Because our policy is one of constant development and improvement, details may vary slightly from

those given in this publication

Page 2

INSTALLER AND OWNER GUIDE

Safety First.

Valor Fires heaters are CE Approved and designed to meet the appropriate British

Standards and Safety Marks.

Quality and Excellence.

All Valor Fires heaters are manufactured to the highest standards of quality and

excellence and are manufactured to ISO 9001.

HANDLING AND UNPACKING

Before continuing any further with the installation of this heater please read the

following:

Important instructions.

!The lifting weight of the heater is as below:

Heat engine (kG) Spacer (kG)

6.8 2.3*

The fascia and firefront weights are not included in the heat engine weight.

* Where models are not supplied with a spacer an

optional spacer frame kit is

obtainable either from the your heater supplier or direct from Valor Fires Sales.

The kit is a 75mm (3 inch) spacer kit (Kit number 05801T1).

One person should be sufficient to lift the heater. If for any reason this weight is

considered too heavy then obtain assistance.

When lifting always keep your back straight. Bend your legs and not your back.

!Avoid twisting at the waist. It is better to reposition your feet.

Avoid upper body / top heavy bending. Always bend from the knees rather than

the waist. Do not lean forward or sideways whilst handling the heater.

Always grip with the palm of the hand. Do not use the tips of fingers for support.

Always keep the heater as close to the body as possible. This will minimise the

cantilever action.

!Use gloves to provide additional grip.

!Always use assistance if required.

Page 3

INSTALLER AND OWNER GUIDE

SAFETY

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Always

! Always install the heater in accordance with this guide. If in doubt obtain

expert advice.

! Always

make sure the electrical socket is accessible and located adjacent to, but

not above the heater.

! Always disconnect the heater from the electrical supply before carrying out

cleaning, maintenance or replacing the light bulbs.

! Always make sure the heater is firmly secured to prevent it from being tipped

over.

! Always

use a fireguard when young children and infirm persons can come into

contact with the heater.

! Always use genuine Valor Fires spares.

Never

! Never leave children unsupervised in a room where the heater is ON and

unguarded.

! Never obstruct or cover the fan outlet or force items into heater openings.

! Never install or use the heater anywhere where water is in use, i.e.

Bathrooms, Kitchens, Shower Rooms, Swimming Pools etc.

! Never use aerosols or steam cleaners on or around the heater.

! Never route the mains supply cable under carpet etc.

! Never install the heater close to curtains or combustible materials.

! Never use the heater to dry clothes etc.

! Never sit or stand on the heater.

Page 4

INSTALLER AND OWNER GUIDE

FITTING THE HEATER

The installation of this heater requires a reasonable level of DIY skills.

Please read this guide thoroughly before commencing installation and if in

doubt, seek help from a competent person

Do I need any tools?

Depending on which style of fascia you have you will need the below screwdrivers:

A Pozidrive / Phillips / cross head

screwdriver. This should have a number 2 size

end. Aflat end screwdriver.

2. For drilling into brickwork you will need a power drill (preferably with hammer

action) and appropriate size drill bit for the wall plugs supplied (See figure 2).

Where can I fit the heater?

This heater can be fitted into fireplaces or surrounds where the following dimensions

are available.

Width 390mm - 450 mm (15.35 inches - 17.72 inches)

Height 555mm - 590 mm (21.9 inches - 23.2 inches)

Depth At least 75mm (At least 3 inches)

The heater is of a slim design and should suit most fireplace openings and fire

surrounds. However, there may be some applications that require the need for a

spacer where a fireplace opening or fireplace surround opening are not available i.e.

a flat wall.

Some models are not supplied with a spacer frame kit. This optional spacer frame kit

is obtainable either from your heater supplier or direct from Valor Fires Sales.

The kit is a 75mm (3 inch) spacer kit (Kit number 05801T1).

Important Electrical Safety

The heater must not

be located in front of or under an electrical socket, the socket

must always be accessible in order to disconnect the heater from the electrical supply

for maintenance and cleaning.

Important! This heater must be earthed.

! The heater is supplied with a 3 pin 13 Amp fused re-wireable plug with 1mm² 3

core cable.

! The wires in the cable are coloured in accordance with the following code: -

Live =Brown

Neutral = Blue

Earth = Green /Yellow

The mains supply must be safely routed from the heater to an electrical socket.

Page 5

INSTALLER AND OWNER GUIDE

Moving the Cable Guide

At the base of the heater you will find the electric cable which runs through a

rectangular plastic cable guide. The cable guide is fitted into the rectangular slot on

the right side of the heater. If required this can be

moved and put in the rectangular slot in the centre

or left hand side of the heater. For removal and

fitting please see below.

Removing the cable guide

1. Before moving the cable guide please note that

the lip of the cable guide is on the outer edge of

the base (See figure 1- Item 1).

2. To remove the cable guide push and lift the tab

on the bottom of it and the cable guide will open

(See figure 1- Item 2).

3. Lift the electric cable clear of the cable guide.

4. Hold the bottom of the cable guide close to the

heater then gently pull the cable guide away from

the rectangular slot (See figure 1- Item 3).

Fitting the cable guide.

When fitting the cable guide please remember that

the lip of the cable guide has to be fitted against

the outer face of the base (See figure 1- Item 1).

1. Gently pinch the sides of the cable guide (See

figure 1 - Item 4) and push into the desired

rectangular slot.

2. Place the electrical cable into the guide and

close the top.

If the mains cable is damaged, to avoid a hazard it

must be replaced by a Valor Fires authorised

service agent, or similarly qualified person (See the

last page of this guide for useful telephone

numbers).

All external wiring between the heater and the

electrical supply shall comply with current IEE

regulations.

Page 6

INSTALLER AND OWNER GUIDE

Figure 1. Removing and

positioning the cable guide.

Item 1

Item 2

Item 4

Item 3

Heater Fixing

All of the fixings supplied with the heater have been identified as in figure 2.

The heater must be fixed into position to prevent it from being tipped over

The following fixing options are available:

Screw Fixing

Wire Fixing

Spacer Frame (The spacer frame may not be supplied with the heater - see

details on page 5 headed ‘Where can I fit the heater?’).

If fitting the heater into a fireplace or surround opening, try the heater in the opening

to ensure that it will fit.

If fitting the heater onto a decorative hearth surface such as marble or tile it is

advisable to protect the hearth surface. Do not drag the heater as this may scratch

the hearth surface.

Method A - Screw fixing

Note - If fixing to marble it is recommended that

Method B - ‘Wire fixing’ is used. Drilling marble

without the correct tools and experience may result

in the marble cracking.

1. Place the heater into the fireplace or surround

opening. Make sure that the heater is in the middle

of the surround or fireplace.

2. There are two slotted holes in the top of the heater

(See figure 3). Mark through the slotted holes so that

their position is clear when the heater is removed.

3. Remove the heater.

Page 7

INSTALLER AND OWNER GUIDE

Figure 2. Loose parts identification (Some parts may not be required)

Figure 3. Screw fixing.

Drill an appropriate size hole in each of the marked positions. Insert wall plugs into

the drilled holes.

Place the heater so that the slotted holes are in line with the wall plugs in the fixing

surface.

6. Screw and secure the heater with two woodscrews (See figure 2).

Method B - Wire Fix

This method of fixing needs a fireplace opening and is recommended when fixing the

heater to a marble surround or where the wall or brickwork is in poor condition.

1. The fixing kit supplied with the heater

includes a steel wire and eyescrew (See

figure 2). These can be used to secure the

heater to the back of a fireplace opening.

2. Mark the eyescrew position on the

centre line at the back of the fireplace

opening and at a height of 533-560mm (21

inches - 22 inches) (See figure 4).

3. Drill an appropriate size hole in the

marked position.

4. Insert a wall plug into the drilled hole.

5. Screw the eyescrew into the wall plug.

6. Position the heater in front of the

fireplace opening.

7. At the top of the heater there are four

small holes, two each side of the heater

(See figure 5- Item 1). From the front of

the heater, thread about 50mm (2 inches) of the steel wire into the inside small hole

on the left side of the heater (See figure 5 - item 2).

Thread the other end of the wire through the remaining small hole on the left hand

side of the heater. Continue to push the wire through this hole until there is only a

small loop of wire at the front of the heater (See figure 5 - item 3).

9. At the back of the heater there will be a long piece and a short piece of wire

coming through the two holes. Hold the short piece and give the long piece a gentle

tug. This will secure the steel wire. Take the long piece and thread this through the

eyescrew in the back of the fireplace opening (See figure 5 - item 4).

10.

From the back of the heater thread the long piece of steel wire through the outer

small hole on the right hand side of the heater (See figure 5 - item 5).

11.

Locate the heater in the fireplace opening, then from the front of the heater, gently

pull the steel wire on the right hand side to gather up the excess until the heater is

secure. Thread the wire through the remaining small hole to lock the wire and heater

in place (See figure 5 - item 6).

Page 8

INSTALLER AND OWNER GUIDE

Figure 4. Eyescrew position.

Method C - Spacer Frame

The spacer frame is for use during

installations where a chimney recess or

rebated fire surround are not available.

For your safety the frame and heater

must be securely fixed to the rear wall.

1. Position the spacer frame against the

wall. Ensure that the spacer frame is

central to the fireplace.

2. The top rear flange of the spacer

frame has two screw locations. Mark the

positions of the two screw locations on

the rear wall (See figure 6).

3. Remove the spacer frame from the

fireplace and place away from the work

area.

4. Drill the screw locations using a no. 12

masonry drill bit.

5.Insert the two wall plugs provided into

the holes

6. Insert a wood screw into each hole

and screw in until there is approximately

6mm of screw protruding from the wall.

Page 9

INSTALLER AND OWNER GUIDE

Figure 6. Bracket positions

Figure 5. Steel wire fixing (The fuel effect

may differ from that shown)

Preparing the heater for installation.

1. Using the four screws provided in the spacer frame

kit, fix the heater to the spacer frame.

2. There is a supply cable slot on both sides of the

spacer frame. It is located at the base. Decide which

side to pass the supply cable through.

3. Position the supply cable in the spacer frame slot

(See figure 7).

Locating the spinners.

! It is possible that during transit the metal disks or 'spinners' located above the

bulbs may have become dislodged. This will cause a poor flicker flame effect.

Relocate the spinners centrally on their pins for best effect.

Fitting the firefronts and fascia

Important notes.

The coal pieces supplied are a natural material. Occasionally it will be necessary

to reduce the size of the coal pieces. To do this place them inside a plastic bag, place

on a suitable hard surface and tap gently with a small hammer or similar tool.

! The pebbles and coals are for decorative purposes only. There is a choke

risk to young children. Make sure they cannot gain access to them.

Fitting the fuel support

Debut and Flare models.

1. The fuel support must be fitted to

the heater before fitting the fascia

assembly. To do this, align the four

holes in the fuel support with those on

the heater (See figure 8). Secure with

the four screws supplied.

Aura 2, Camden, Otago and Seattle

models.

1. The fuel support is already

assembled to the firefront.

Page 10

INSTALLER AND OWNER GUIDE

Figure 7. Locating the cable

Figure 8.

Otros manuales para 809

Tabla de contenidos

Otros manuales de Calentador eléctrico de Valor Fires

Valor Fires

Valor Fires 850 Instrucciones de uso

Valor Fires

Valor Fires 833 Instrucciones de uso

Valor Fires

Valor Fires 823 Instrucciones de uso

Valor Fires

Valor Fires 820 Longlite Instrucciones de uso

Valor Fires

Valor Fires 820 Longlite Instrucciones de uso

Valor Fires

Valor Fires 833 Instrucciones de uso

Valor Fires

Valor Fires 842 Instrucciones de uso

Valor Fires

Valor Fires 845 Instrucciones de uso

Valor Fires

Valor Fires Dream 843 Instrucciones de uso

Valor Fires

Valor Fires 843 Instrucciones de uso

Valor Fires

Valor Fires 831 Instrucciones de uso

Valor Fires

Valor Fires 834 Instrucciones de uso

Valor Fires

Valor Fires 834 Instrucciones de uso

Valor Fires

Valor Fires 828 Instrucciones de uso

Valor Fires

Valor Fires 823 Instrucciones de uso

Valor Fires

Valor Fires 809 Instrucciones de uso

Valor Fires

Valor Fires 824 Blenheim Longlite Instrucciones de uso

Valor Fires

Valor Fires 829 Instrucciones de uso

Manuales populares de Calentador eléctrico de otras marcas

Heatscope

Heatscope PURE Guía rápida

Sunbeam

Sunbeam Calentador SFH457A Manual de usuario

Dura Heat

Dura Heat DH2000C Manual de usuario

Harvia

Harvia K10.5GS Manual de usuario

Harvia

Harvia GL70 Manual de usuario

Heylo

Heylo DE 2 XL Manual de usuario

Heylo

Heylo DE 20 SH Manual de usuario

Harvia

Harvia PP70SP Manual de usuario

Tylo

Tylo SENSE SPORT Manual de usuario

Dirna

Dirna ecodirna SUN Manual de instrucciones

Creda

Creda Heating Solution Manual de usuario

THERMEx

THERMEx Frame E Wi-Fi Series Manual de usuario

SHUFT

SHUFT UniMAX-R 1400VE EC Manual de usuario

HUUM

HUUM CLIFF Series Manual de usuario

Harvia

Harvia HL70S Manual de usuario

Dimplex

Dimplex DHEBHT Manual de usuario

Radialight

Radialight SIRIO Manual de usuario

Polaris

Polaris PRE E 0715 H Manual de usuario