Valcom VIP-176A-IC Manual de usuario

1 947572

CAUTION: To reduce the risk of electric shock,

Do not remove cover.

No user serviceable parts inside.

Refer servicing to qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous

voltage constituting a risk of electric

shock is present within this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompanying

this unit.

ISSUE 1

VIP-176A-IC

InformaCast®Compliant

SIP Door Intercom

INTRODUCTION

The VIP-176A-IC InformaCast Compliant SIP

Talkback Door Intercom allows communication to

SIP-based telephone systems or Valcom

Enhanced Station Port adapters via an IP-based

network.

SPECIFICATIONS

Access Methods

InformaCast Server

SIP –enabled telephone system

PBX, FXO Port w/Valcom Enhanced Station

Port

POTS telephone set w/Valcom Enhanced

Station Port

Valcom M Cast Page Group

Features

RJ-45 for network connection

1 Form C Smart Relay (optional)

Network activity LEDs

Power over Ethernet (PoE) 802.3af

compatible

Dimensions/Weight:

4.88”H x 4.88" W x 2.5" D (including button)

(12.4cm H x 12.4cm W x 6.4cm D)

Weight: 0.82 lbs. (0.37 kg)

Nominal Power Requirements

Via 802.3af PoE Ethernet Switch: Class 3

Environment

Network Interface:

Temperature: 0 to +40° C

Humidity: 0 to 85% non-precipitating

Suitable for indoor or outdoor installation,

protected from direct precipitation.

Precautionary Designations

FCC Information

This equipment has been tested and found to

comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated

in a commercial environment. This

equipment generates uses and can radiate

radio frequency energy and if not installed

and used in accordance with the instruction

manual, may cause harmful interference to

radio communications. Operation of this

equipment in a residential area may cause

harmful interference in which case the user

will be required to correct the interference at

his own expense.

2 947572

INSTALLATION

Operation:

The VIP-176A-IC provides door intercom access

via network connection to customer telephone

system or stand-alone telephone set. Interface to

customer telephone system can be via SIP

registration to a voice over IP (VoIP) telephone

system, or FXO port (when used with a Valcom

Enhanced Station Port). Pressing the call button

on the door plate initiates a call to a user-

specified telephone number and the call

assurance LED on the door plate begins to flash.

When the call is answered, a hands-free

communications path is established to the door

plate, and the call assurance LED on the door

plate remains lit. An optional Smart Relay

module, VM-SRLY is available separately, which

provides one form C relay for uses such as

activating door entry equipment.

Mounting

For enhanced protection against static

electrical discharge, it is recommended the

VIP-176A-IC be installed into a grounded

electrical box.

The VIP-176A-IC Doorplate is designed for

double gang FD electrical box mounting. Verify

depth of electrical box is adequate for mounting

the VIP-176A-IC. (See Figure 1)

When purchasing weatherproof box, the ground

screw should be off-center. For example, Bell

part number 5333-0 could be used.

(See Figure 2)

Power Connections

The only method of powering the VIP-176A-IC is

via a Power over Ethernet (PoE) switch or power

injector meeting the 802.3af specification.

Make all required signal connections before

connecting to Ethernet switch or power injector

meeting the 802.3af specification.

Network Connection

The VIP-176A-IC has one RJ-45 Network

connector.

Green LED: (Link) Indicates Ethernet connection

when illuminated.

Yellow LED: (Activity) Indicator flashes to

indicate network activity.

Use a standard Ethernet patch cable to connect

the NETWORK connector to an Ethernet switch.

(See Figure 3).

Figure 1.

Figure 2.

Figure 3.

3 947572

Status Indicator Lights

The VIP-176A-IC Door plate is equipped with a

status indicator LED. LED flashes when the call

button is pressed and steady when the call is

connected.

Relay Connections

An optional Smart Relay module, VM-SRLY, may

be ordered separately. Installation instructions to

connect with the VIP-176A-IC Relay Header are

included with the VM-SRLY.

SETUP

The VIP-176A-IC will automatically acquire an

IP address (using DHCP) and connect to the

InformaCast server when connected to the

network and powered up. Information specific to

your application will need to be programmed into

the InformaCast server. Refer to the InformaCast

documentation for further information.

TECHNICAL ASSISTANCE

Assistance in troubleshooting is available from

the factory. Call (540) 563-2000 and press 1 for

Technical Support or via email at

support@valcom.com.

When requesting assistance, you should include

all available information. General information and

troubleshooting procedures are available on the

Valcom website at www.valcom.com.Valcom

equipment is not field repairable. Valcom, Inc.

maintains service facilities in Roanoke, VA.

Should repairs be necessary, attach a tag to the

unit clearly stating your company name, address,

phone number, contact person and the nature of

the problem.

Send the unit to: Valcom, Inc.

Repair & Return Dept.

5614 Hollins Road

Roanoke, Va. 24019-5056

WARRANTY

Warranty information may be found on our

website www.valcom.com/warranty

Otros manuales de Sistema de intercomunicación de Valcom

Valcom

Valcom V-1074 Manual de usuario

Valcom

Valcom PagePro IP VIP-172L-Brass Manual

Valcom

Valcom V-ACS25 Manual de usuario

Valcom

Valcom V-2928 Manual de usuario

Valcom

Valcom V-2924A Manual de usuario

Valcom

Valcom VIP-422A-IC Manual de usuario

Valcom

Valcom InformaCast VIP-9894-1-Finish-IC Manual de usuario

Valcom

Valcom V-ACS25 Manual de usuario

Valcom

Valcom VIP-9895 Manual de usuario

Valcom

Valcom V-2924A Manual de usuario

Valcom

Valcom VIP-893 Manual de usuario

Valcom

Valcom VIP-160A-IC Manual de usuario

Valcom

Valcom V-1074 Manual de usuario

Valcom

Valcom VIP-581A-IC Manual de usuario

Valcom

Valcom VIP-9895-IC Manual de usuario

Valcom

Valcom V-119RT Manual de usuario

Valcom

Valcom VIP-801A Manual de usuario

Valcom

Valcom VIP-172L-BRASS/SS Manual de usuario

Valcom

Valcom VIP-9890-CB Manual de usuario

Valcom

Valcom V-2924A Manual de usuario

Valcom

Valcom V-1109RTHF Manual de usuario

Valcom

Valcom V-2926 Manual de usuario

Valcom

Valcom VIP-176A Manual de usuario

Valcom

Valcom V-136RT Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario