Vaisala HUMICAP HMM100 Manual de usuario
M211024EN-D
User Guide
Vaisala HUMICAPâHumidity Module
HMM100
PUBLISHED BY
Vaisala Oyj
Street address: Vanha Nurmijärventie 21, FI-01670 Vantaa, Finland
Mailing address: P.O. Box 26, FI-00421 Helsinki, Finland
Phone: +358 9 8949 1
Visit our Internet pages at www.vaisala.com.
© Vaisala Oyj 2018
No part of this manual may be reproduced,
published or publicly displayed in any form or by
any means, electronic or mechanical (including
photocopying), nor may its contents be modified,
translated, adapted, sold or disclosed to a third
party without prior written permission of the
copyright holder. Translated manuals and
translated portions of multilingual documents are
based on the original English versions. In
ambiguous cases, the English versions are
applicable, not the translations.
The contents of this manual are subject to change
without prior notice.
Local rules and regulations may vary and they
shall take precedence over the information
contained in this manual. Vaisala makes no
representations on this manual’s compliance with
the local rules and regulations applicable at any
given time, and hereby disclaims any and all
responsibilities related thereto.
This manual does not create any legally binding
obligations for Vaisala towards customers or end
users. All legally binding obligations and
agreements are included exclusively in the
applicable supply contract or the General
Conditions of Sale and General Conditions of
Service of Vaisala.
This product contains software developed by
Vaisala or third parties. Use of the software is
governed by license terms and conditions
included in the applicable supply contract or, in
the absence of separate license terms and
conditions, by the General License Conditions of
Vaisala Group.
Table of Contents
1. About This Document..................................................................................... 5
1.1 Version Information.............................................................................................5
1.2 Related Manuals...................................................................................................5
1.3 Documentation Conventions............................................................................. 5
1.4 Trademarks...........................................................................................................6
1.5 Patent Notice....................................................................................................... 6
2. Product Overview............................................................................................. 9
2.1 Introduction to HMM100 Series Humidity Modules.........................................9
2.2 Basic Features and Options..............................................................................10
2.3 Probe Types........................................................................................................10
2.4 Filter Types...........................................................................................................11
2.5 Installation Accessories..................................................................................... 12
2.5.1 Probe Mounting Flange...............................................................................12
2.5.2 Probe Mounting Clamp............................................................................... 13
2.5.3 Mounting Bracket with Lid......................................................................... 13
2.5.4 Module Housing (IP65)...............................................................................14
2.6 Safety.................................................................................................................. 14
2.6.1 ESD Protection............................................................................................. 15
2.7 Regulatory Compliances................................................................................... 15
3. Installation.......................................................................................................... 17
3.1 Dimensions..........................................................................................................17
3.2 Installing the Module......................................................................................... 18
3.3 Installing the Probe............................................................................................18
3.3.1 Mounting HMM100 Probe to Mounting Clamp.........................................19
3.4 Wiring.................................................................................................................. 21
3.4.1 2-wire Output...............................................................................................21
3.4.2 3-wire Output...............................................................................................21
3.5 Verifying Installation......................................................................................... 22
4. Operation........................................................................................................... 23
4.1 Using Service Port.............................................................................................23
4.1.1 Installing Driver for USB Cable..................................................................23
4.1.2 Terminal Application Settings...................................................................24
4.2 List of Serial Commands...................................................................................25
4.3 Device Information and Status........................................................................ 27
4.3.1 Show Device Information...........................................................................27
4.3.2 Show Quantities..........................................................................................27
4.3.3 Show Calibration Info.................................................................................28
4.3.4 Show Analog Output Status......................................................................28
4.3.5 Show Firmware Version............................................................................. 29
4.4 Serial Line Output Commands........................................................................ 29
4.4.1 Start Measurement Output........................................................................29
4.4.2 Stop Measurement Output........................................................................30
4.4.3 Set Output Interval.....................................................................................30
4.4.4 Output a Reading Once.............................................................................30
Table of Contents
1
4.5 Calibration Commands......................................................................................31
4.5.1 Calibrate Temperature Measurement........................................................31
4.5.2 Calibrate Humidity Measurement............................................................. 32
4.5.3 View User Adjustment Parameters...........................................................33
4.5.4 Set User Adjustment Parameters............................................................. 33
4.5.5 Zero the Trimmers...................................................................................... 34
4.5.6 Calibrate Analog Output........................................................................... 34
4.6 Configuring Serial Line Operation...................................................................35
4.6.1 Set Serial Line Settings.............................................................................. 35
4.6.2 Set Terminal Echo.......................................................................................36
4.6.3 Set Module Address................................................................................... 36
4.6.4 Set Serial Interface Mode...........................................................................37
4.7 Configuring Measurement Parameters.......................................................... 38
4.7.1 Set Environmental Compensation Values............................................... 38
4.7.2 Set Temporary Pressure Compensation Value........................................39
4.8 Configuring Analog Output............................................................................. 39
4.8.1 Set Analog Output Mode...........................................................................39
4.8.2 Select Analog Output Quantity and Scaling.......................................... 40
4.8.3 Test Analog Output..................................................................................... 41
4.9 Other Commands..............................................................................................42
4.9.1 Display Command List............................................................................... 42
4.9.2 Enable Advanced Commands...................................................................42
4.9.3 Display Currently Active Errors.................................................................42
4.9.4 Connecting to the Module in POLL Mode............................................... 43
4.9.5 Closing the Connection in POLL Mode.................................................... 43
4.9.6 Save Changed Settings..............................................................................43
4.9.7 Restore Saved Settings............................................................................. 44
4.9.8 Reset the Module....................................................................................... 44
4.9.9 Restore Factory Settings...........................................................................44
5. Maintenance...................................................................................................... 47
5.1 Changing Filter..................................................................................................47
5.2 Changing Sensor............................................................................................... 47
5.3 Calibration......................................................................................................... 49
5.4 Calibration and Adjustment Using Trimmers................................................ 50
5.5 Calibration and Adjustment Using Serial Line................................................51
5.5.1 Temperature Calibration (CT).................................................................... 51
5.5.2 Humidity Calibration (CRH)...................................................................... 54
6. Troubleshooting...............................................................................................57
6.1 Analog Output Error Notification....................................................................57
6.2 Problems and Their Possible Solutions.......................................................... 57
7. Technical Data..................................................................................................59
7.1 Dimensions........................................................................................................ 62
7.2 Accessories........................................................................................................ 62
Warranty........................................................................................................................65
Technical Support......................................................................................................65
Recycling.......................................................................................................................65
HMM100 User Guide M211024EN-D
2
List of Figures
Figure 1 HMM100 Humidity Module with Probe.......................................................... 9
Figure 2 Probe Types...........................................................................................................11
Figure 3 Extended 400-mm Plastic Probe....................................................................11
Figure 4 Optional Probe Mounting Flange...................................................................12
Figure 5 HMM100 Probe with Mounting Clamp.......................................................... 13
Figure 6 Mounting Bracket with Lid...............................................................................14
Figure 7 Optional Module Housing.................................................................................14
Figure 8 HMM100 Dimensions. Left to Right: Standard and
Extended Probe Body....................................................................................... 17
Figure 9 Component Board (3-wire Version)..............................................................18
Figure 10 Wiring for 2-wire Output.................................................................................. 21
Figure 11 Wiring for 3-wire Output................................................................................. 22
Figure 12 PuTTY Terminal Application........................................................................... 25
Figure 13 Changing the Sensor........................................................................................ 49
Figure 14 Trimmers for Oset and Gain.........................................................................50
Figure 15 Loop Supply Voltage Versus Loop Resistance..........................................60
Figure 16 HMM100 Dimensions. Top to Bottom: Standard and
Extended Probe Body...................................................................................... 62
List of Figures
3
List of Tables
Table 1 Document Versions................................................................................................5
Table 2 Related Manuals..................................................................................................... 5
Table 3 Applicable Patents.................................................................................................6
Table 4 Quantities Measured by HMM100......................................................................9
Table 5 Filter Types and Properties................................................................................. 11
Table 6 HMM100 Default Serial Interface Settings.................................................... 24
Table 7 Basic Serial Commands......................................................................................25
Table 8 Advanced Serial Commands.............................................................................26
Table 9 Error Levels for Analog Output Modes.......................................................... 57
Table 10 Measurement Performance...............................................................................59
Table 11 Operating Environment..................................................................................... 59
Table 12 Inputs and Outputs.............................................................................................60
Table 13 HMM100 3-wire Model Current Consumption.............................................60
Table 14 Mechanical Specifications.................................................................................. 61
Table 15 Spare Parts and Accessories.............................................................................62
HMM100 User Guide M211024EN-D
4
1. About This Document
1.1 Version Information
This document provides instructions for installing, operating, and maintaining Vaisala
HUMICAPâHumidity Module HMM100.
Table 1 Document Versions
Document Code Date Description
M211024EN-D March 2018 This manual. Added information on the following:
• HUMICAPâR2 and HUMICAPâ180V humidity sensor
• Extended 400‑mm‑long option for the plastic probe
• PPS plastic grid with stainless steel net filter option
Removed information on the catalytic VHP filter.
M211024EN-C November 2013 Removed RHCAL command. Added information on which parameter
changes must be saved separately and which are saved automatically.
M211024EN-B October 2012 Added VHP filter option and new pictures to the installation
instructions, edited commands and technical specifications.
1.2 Related Manuals
Table 2 Related Manuals
Document Code Name
M210185EN Vaisala Humidity Calibrator HMK15 User's Guide
M211002EN Vaisala HUMICAP
â
Humidity Module HMM100 Quick Reference Guide
M211078EN Module Housing (IP65) for Humidity Module HMM100 Quick Reference Guide
M211079EN Mounting Bracket for Humidity Module HMM100 Quick Reference Guide
M211080EN Mounting Flange for Humidity Probes Quick Reference Guide
1.3 Documentation Conventions
Warning alerts you to a serious hazard. If you do not read and follow
instructions carefully at this point, there is a risk of injury or even death.
WARNING!
Chapter 1 – About This Document
5
Caution warns you of a potential hazard. If you do not read and follow
instructions carefully at this point, the product could be damaged or important data
could be lost.
CAUTION!
Note highlights important information on using the product.
Tip gives information for using the product more eciently.
Lists tools needed to perform the task.
Indicates that you need to take some notes during the task.
1.4 Trademarks
Vaisalaâand HUMICAPâare registered trademarks of Vaisala Oyj.
Windowsâis either a registered trademark or trademark of Microsoft Corporation in the
United States and other countries.
All other product or company names that may be mentioned in this publication are trade
names, trademarks, or registered trademarks of their respective owners.
1.5 Patent Notice
This product is protected by the following patents and their corresponding national rights:
Table 3 Applicable Patents
Issuing Oce Publication Number
Finnish Patent and Registration Oce Finnish patent 98861
National Institute of Industrial Property French patent 6650303
German Patent and Trade Mark Oce German patent 69418174
HMM100 User Guide M211024EN-D
6
Issuing Oce Publication Number
Japan Patent Oce Japanese patent 3585973
Intellectual Property Oce UK patent 0665303
United States Patent and Trademark Oce U.S. patent 5607564
Chapter 1 – About This Document
7
HMM100 User Guide M211024EN-D
8
Otros manuales para HUMICAP HMM100
2
Tabla de contenidos
Otros manuales de Unidad de control de Vaisala
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
