VADDIO EasyIP Systems Manual de usuario

Installation Guide for

EasyIP Systems

Featuring the EasyIP Decoder, EasyIP Mixer, and EasyIP 10 Camera

Document 411-0041-39 Rev C

June 2020

Contents

Overview 1

What's in this Guide 2

The EasyIP Ecosystem 2

EasyIP Cameras 2

EasyIP Decoder 2

EasyIP Mixer 2

PoE+ Switch 3

Camera Features 3

Decoder Features 3

Mixer Features 3

Unpacking the EasyIP System Components 4

EasyIP 10 AV-over-IP PTZ Camera 4

EasyIP Decoder AV-over-IP Switching USB Endpoint 4

EasyIP Mixer AV Switcher 5

A Quick Look at the EasyIP Family 6

EasyIP 10 Camera 6

EasyIP Decoder 7

EasyIP Mixer 8

Installation 9

Don’t Void Your Warranty! 9

Before You Start 9

Before Installing a Camera 10

Cabling Notes 10

Basic Connections – EasyIP Decoder and EasyIP 10 Cameras 11

Basic Connections – EasyIP Mixer 12

Using Dante Devices with the EasyIP Mixer 13

Installing the Wall Mount 13

About Ceiling-Mounted Cameras 13

Installing the Camera 14

Powering Up the EasyIP System 15

Next Steps 15

Operation, Storage, and Care 15

Compliance and Conformity Statements 16

FCC Part 15 Compliance 16

ICES-003 Compliance 16

European Compliance 17

Photo Credits 18

Index 19

Overview

This guide discusses the following products:

nEasyIP 10AV-over-IP PTZ camera, 999-30200-000 (black, worldwide)

EasyIP 10 AV-over-IP PTZ camera, 999-30200-000W (white, worldwide)

nEasyIP Decoder AV-over-IP switching USB endpoint, 999-60210-000 (worldwide)

nEasyIP Mixer AV switcher, 999-60320-000 (worldwide)

What's in this Guide

This guide covers:

nUnpacking the system

nTips for a successful installation

nInstructions for installing the camera mount

nInformation on connecting the system components

nInformation on mounting the camera

nSystem power-on

Complete product information for the EasyIP product family is available in the Complete Manual for

EasyIP Systems.

Note

If you are responsible for configuring the equipment after installing it, you will need the Complete

Manual. It includes the information from this guide, plus information on system administration, operation,

and troubleshooting.

The EasyIP Ecosystem

Vaddio®EasyIP products are designed to be used together, and have limited or no compatibility with other

types of products.

nEasyIP cameras deliver video in Vaddio's proprietary EasyIP format.

nAn EasyIP Decoder or EasyIP Mixer is required to convert the cameras' output signal to an IP and/or

USB stream.

nThe decoder and mixer do not recognize other types of cameras.

nThe decoder or mixer automatically detects EasyIP cameras on its own subnet.

nCameras are not required to be on the same subnet as the device that manages them.

nEasyIP products require PoE+ power. Typically the EasyIP system is powered by a PoE+ switch.

EasyIP Cameras

EasyIP cameras may be installed anywhere on the network. They require only a PoE+ power connection.

An EasyIP Decoder or EasyIP Mixer is needed to decode the AV-over-IP signal.

EasyIP Decoder

The decoder is the central component of a basic EasyIP installation. Its functions include

nVideo – pair with up to four cameras at a time, control the active camera via web interface, and decode

the camera's AV-over-IP signal.

nAudio – connect two Vaddio microphones and a speaker.

nUSB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing

applications.

EasyIP Mixer

The mixer is the central component of a full-featured EasyIP pro AV room solution. Its functions include

nVideo – pair with up to four cameras at a time, control the active camera via web interface, and decode

the camera's AV-over-IP signal.

nAudio – connect two microphones and two speakers; pair with Dante®audio products on your network.

Built-in audio mixer.

nUSB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing

applications.

Installation Guide for EasyIP Systems

PoE+ Switch

A PoE+ switch simplifies installation, eliminating the need for PoE+ power injectors and placing all the

connected products on the same subnet.

Camera Features

n2.14 Megapixel effective, native 1080p/60 full HD image sensor

n10x optical zoom, horizontal field of view of 67°

nResolutions up to 1080p/60

nPrecise pan and tilt movements at up to 90° per second

nIntegration-ready Telnet control

nPairs with an EasyIP Decoder, which provides video and audio connectivity and manages streaming

nJust one cable – the EasyIP connection to a PoE switch

nEnterprise-class IT administrative capabilities with full web controls for remote management

Decoder Features

nUncompressed USB 3.0 streaming

nStreaming video resolutions up to 1080p/60

nFull-duplex audio streaming

nAudio inputs for two Vaddio microphones

nHDMI video output for local display

nUniversal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows®,

macOS®, and Linux operating systems, compatible with most UC conferencing applications

nIntegration-ready Telnet control

nPairs with up to four EasyIP 10 cameras on your network to provide control and manage streaming

nEnterprise-class IT administrative capabilities with full web controls for remote management

Mixer Features

nUncompressed USB 3.0 streaming

nStreaming video resolutions up to 1080p/60

nFull-duplex audio streaming

nLine-level inputs for two microphones

nLine-level outputs for two speakers

nAudio mixer and video switcher

nSupport for Dante®microphones and speakers

nHDMI video output for local display

nUniversal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows®,

macOS®, and Linux operating systems, compatible with most UC conferencing applications

nIntegration-ready Telnet control

nPairs with up to four EasyIP 10 cameras on your network to provide control and manage streaming

nEnterprise-class IT administrative capabilities with full web controls for remote management

Installation Guide for EasyIP Systems

Unpacking the EasyIP System Components

Make sure you received all the items you expected.

EasyIP 10 AV-over-IP PTZ Camera

Worldwide: 999-30200-000 (black), 999-30200-000W (white)

The box should contain these items:

nCamera (black or white)

nVaddioIR Remote Commander

nThin Profile Wall Mount with mounting hardware

nCat-5e cable, 10 ft. (3 m)

nQuick-Start Guide

Caution

Always support the camera's base when lifting or moving it. Lifting the camera by its head or mounting arm

will damage it.

EasyIP Decoder AV-over-IP Switching USB Endpoint

Worldwide: 999-60210-000

The box should contain these items:

nEasyIP Decoder

nUSB 3 cable, 6 ft. (1.8 m)

nCat-5e cable, 3 ft. (0.9 m)

n4-position Phoenix-type connector

nHalf-rack mounting kit

nQuick-Start Guide

Installation Guide for EasyIP Systems

EasyIP Mixer AV Switcher

Worldwide: 999-60320-000

The box should contain these items:

nEasyIP Mixer

nHalf-rack mounting kit

n3-position Phoenix-style connectors (qty. 6)

nCat-5 cable, 3 ft (0.9 m)

nUSB 3.0 cable, type A to type B, 6 ft (1.8 m)

nQuick-Start Guide

Installation Guide for EasyIP Systems

A Quick Look at the EasyIP Family

nEasyIP 10 camera – Great video, simple installation, minimal set-up.

nEasyIP Decoder – Decodes the AV-over-IP signal from the camera(s) and originates a USB stream.

nEasyIP Mixer – Lovely and mostly symmetrical, hypoallergenic and guaranteed not to shed fur.

EasyIP 10 Camera

The EasyIP 10 camera delivers great video with simple installation and minimal set-up. Use it with an

EasyIP Decoder or EasyIP Mixer.

Camera and zoom lens – 10X optical zoom lens.

IR sensor – Receives signals from the IR remote.

Status light – Multi-colored LED that indicates the camera's current state.

nBlue – Camera is active

nPurple – Standby mode or booting

nYellow – Firmware update is in progress

nBlinking red – Video mute is on (UC color scheme)

nBlinking yellow – Motor out of calibration

Network/PoE+ – RJ-45 connector. Connect to a powered port on the PoE+ switch.

It doesn't get much easier than that, does it?

Installation Guide for EasyIP Systems

EasyIP Decoder

The EasyIP Decoder receives and decodes the AV-over-IP signal from the camera(s) and originates a USB

stream.

Status light – Provides basic information about the device.

nIlluminated: Normal operation.

nOff: No power to the device.

nBlinking: Error.

IP Address button– Press to display the decoder's IP address in its USB stream.

Dimensionally enhanced logo badge – We have spared no expense to provide a puffy logo badge to

elevate your experience. It's quite shiny, and offers superior tactile appeal.

nNetwork/PoE+ – RJ-45 connector. Connect to a powered port on the PoE+ switch.

nUSB 3.0 – USBType B connector. Connect to a computer for use with soft conferencing applications.

Provides uncompressed USB 3.0 stream.

nEasyMic – RJ-45 connectors. Connect to a TableMIC or other microphone with EasyMic connectivity.

nAudio output – Line level differential audio and 12 VDC power output to the optional amplified speaker

or other audio infrastructure.

Installation Guide for EasyIP Systems

EasyIP Mixer

Ideal for large classrooms and multi-camera applications, the EasyIP Mixer pairs to Dante audio inputs and

outputs, and manages up to four Vaddio EasyIP cameras. It's the Art of Easy in a production switcher.

nSwap button – Changes the selected input. If the PIP is turned on, this also exchanges the PIP and

main image on the HDMI output.

nPIP button – Toggles the PIP on or off. Illuminated when the PIP is on.

nStream button – Toggles HDMI and USB stream on or off. Illuminated when the stream is available.

nIP button – Toggles the IP address display. Illuminated when the streams are displaying the IP

address instead of video.

nReset button and power/status light – Illuminated when the device has power. Blinks to indicate an

error condition. Press the button to reboot the device.

nDimensionally enhanced logo badge – We have spared no expense to provide a lovely,

dimensionally enhanced logo badge to elevate your visual experience. It's quite shiny. We hope you'll

enjoy it.

nNetwork/PoE – Power, control via web interface, and Dante audio.

nUSB 3.0 – Uncompressed video output with PCM audio for conferencing applications.

nRS-232 – Connect to an optional third-party control system.

nTrigger – Connect up to five trigger devices.

nHDMI In – Video (and audio, if available) from a connected camera or other HDMI source.

nHDMI Out - Output video (and audio, if available) from the selected input.

nAudio In Mic/Line In 1 and Mic/Line In 2 – Microphone or other audio inputs. Can be configured to

supply phantom power.

nAudio Out Line Out 1 and Line Out 2 – Far-end audio from conferencing application or as configured in

the audio matrix.

Installation Guide for EasyIP Systems

Otros manuales para EasyIP Systems

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de conferencias de VADDIO

VADDIO

VADDIO AV BRIDGE MATRIX PRO Manual de usuario

VADDIO

VADDIO ConferenceSHOT AV Manual de usuario

VADDIO

VADDIO ConferenceSHOT AV Manual de usuario

VADDIO

VADDIO ConferenceSHOT AV Manual de usuario

VADDIO

VADDIO GroupSTATION 999-8900-000 Manual de usuario

VADDIO

VADDIO ConferenceSHOT AV Manual de usuario

VADDIO

VADDIO ConferenceSHOT AV Manual de usuario

VADDIO

VADDIO HUDDLESTATION Manual de funcionamiento

VADDIO

VADDIO EasyTalk Manual de usuario

VADDIO

VADDIO EasyIP Systems Manual de usuario

VADDIO

VADDIO Quick-Connect CCU H900 Manual de usuario

VADDIO

VADDIO EasyMic MicPOD Manual de usuario

VADDIO

VADDIO ConferenceSHOT AV Manual de usuario

VADDIO

VADDIO ConferenceSHOT AV Manual de usuario

VADDIO

VADDIO PowerVIEW HD-30 Manual de usuario

VADDIO

VADDIO ConferenceSHOT AV Manual de usuario

VADDIO

VADDIO BaseStation 999-8920-000 Manual de usuario

VADDIO

VADDIO WideSHOT 999-6911-000 Manual de usuario

VADDIO

VADDIO GroupSTATION Manual de usuario

VADDIO

VADDIO OneLINK Bridge Manual de usuario

VADDIO

VADDIO HUDDLESTATION Manual de usuario

VADDIO

VADDIO WallVIEW HD-USB PRO System Manual de usuario

VADDIO

VADDIO BaseSTATION Manual de usuario

Manuales populares de Sistema de conferencias de otras marcas

Kramer

Kramer VIA GO Manual de usuario

AVT

AVT MAGIC AC1 Go Manual de usuario

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manual de usuario

Sony

Sony PCS-I150 Manual de usuario

Middle Atlantic Products

Middle Atlantic Products VTC Series Manual de usuario

Prentke Romich Company

Prentke Romich Company Vanguard Plus Guía

Speakerbus

Speakerbus iD 712 Manual de usuario

Trelleborg

Trelleborg SafePilot CAT PRO Manual de usuario

Sennheiser

Sennheiser ADN Manual de usuario

ADTRAN

ADTRAN NetVanta 7100 Manual de usuario

AINA

AINA PTT Voice Responder Manual de usuario

Yamaha

Yamaha ProjectPhone PJP-100H Manual de usuario

vissonic

vissonic VLI Series Manual de usuario

Panasonic

Panasonic KX-VC500 Manual de usuario

Poly

Poly Trio 8300 Manual de usuario

Crestron

Crestron Mercury CCS-UCA-SMK Dibujo dimensional

Inmarsat

Inmarsat mini M Manual de usuario

Tenveo

Tenveo ALL-IN-ONE Manual de usuario