vacuubrand VAC 24seven Manual de usuario
Technology for
Vacuum Systems
Instructions for use
OI no.: 20901531Original instructions EN
Vacuum controller VACUU·SELECT
Description of vacuum controller
2 20901531_EN_VACUU·SELECT_V1.0_010621
Original instructions
Keep for further use!
This manual is only to be used and distributed in its complete and original form. It is strictly the user's responsibility to
carefully check the validity of this manual with respect to the product.
Thank you for purchasing this product from VACUUBRAND GMBH + CO KGVACUUBRAND GMBH + CO KG . You have chosen a modern and techni‑
cally high quality product.
Imprint
Manufacturer:
VACUUBRAND GMBH + CO KGVACUUBRAND GMBH + CO KG
Alfred‑Zippe‑Str. 4Alfred‑Zippe‑Str. 4
97877 Wertheim97877 Wertheim
GERMANYGERMANY
Phone:
Head oce: +49 9342 808‑0
Sales: +49 9342 808‑5550
Service: +49 9342 808‑5660
Fax: +49 9342 808‑5555
Email:[email protected]
Web: www.vacuubrand.com
Content
320901531_EN_VACUU·SELECT_V1.0_010621
TABLE OF CONTENTS
1 About this document 5
1.1 User information ........................................... 5
1.1.1 Descriptions of the control module ...................... 5
1.1.2 Safety............................................. 5
1.1.3 In this manual....................................... 5
1.1.4 Symbols and pictograms .............................. 6
1.1.5 Handling instructions (action steps) ...................... 7
1.2 Abbreviations ............................................. 7
1.3 Term denitions............................................ 8
2 Product description 9
2.1 VACUU·SELECT vacuum controller ............................ 9
2.2 Product view .............................................. 9
2.3 Remote control and interfaces ............................... 10
2.3.1 Modbus TCP ...................................... 10
2.3.2 RS‑232 serial interface .............................. 11
3 User interface 13
3.1 Switch on controller ....................................... 13
3.1.1 Touchscreen ...................................... 14
3.1.2 Gestures for operation ............................... 14
3.2 Set up device ............................................ 14
3.2.1 Data storage message............................... 14
3.2.2 Adjust the screen orientation .......................... 15
3.3 Display and operating elements .............................. 16
3.3.1 Process screen (main screen) ......................... 16
3.3.2 Display elements ................................... 17
3.3.3 Operating elements and symbols ...................... 19
4 Operation 23
4.1 Applications ............................................. 23
4.1.1 Select and start application ........................... 23
4.1.2 Adjust pressure setpoint.............................. 24
4.1.3 Stop application .................................... 26
4.2 Application parameters (parameter list) ........................ 26
4.3 Pressure graph ........................................... 28
4.4 Main menu .............................................. 29
4.4.1 Applications ....................................... 30
4.4.2 Favorites ......................................... 31
5 Main menu 33
5.1 Advanced operation ....................................... 33
5.1.1 Application editor ................................... 33
5.1.2 Menu bar and description ............................ 34
5.1.3 Overview of process steps............................ 35
5.1.4 Process end....................................... 36
5.1.5 Edit application..................................... 37
5.1.6 Remove process step ............................... 39
5.1.7 Settings .......................................... 40
Content
4 20901531_EN_VACUU·SELECT_V1.0_010621
5.1.8 Settings/administration............................... 42
5.1.9 Administration – import/export ......................... 44
5.1.10 Administration – VACUU·BUS ......................... 45
5.1.11 Administration/Function Extensions..................... 47
5.2 Data logger .............................................. 48
5.3 Service ................................................. 49
5.3.1 Service information ................................. 49
5.3.2 Diagnostic data .................................... 50
6 Troubleshooting 52
6.1 Error messages .......................................... 52
6.1.1 Error indication..................................... 52
6.1.2 Acknowledge error message .......................... 53
6.2 Error – Cause – Remedy ................................... 54
6.2.1 Pop‑up message ................................... 54
6.2.2 General errors ..................................... 55
7 Appendix 58
7.1 Technical information ...................................... 58
7.2 Licensing information and data protection ...................... 59
7.3 Index ................................................... 60
520901531_EN_VACUU·SELECT_V1.0_010621
About this document
11 About this documentAbout this document
This manual is part of a modular manual compiled in a binder.
1.11.1 User informationUser information
1.1.11.1.1 Descriptions of the control moduleDescriptions of the control module
In this section of the manual, you will nd descriptions for the vacuum controller
in the control module of the vacuum pumping unit.
Manual module Content
VAC 24seven_VACUU·SELECT Vacuum controller in the control module
Control unit for VAC 24seven
>Read this manual thoroughly and completely before putting the product into
operation.
>Observe the safety information in the system description VAC 24seven_Sys‑
tem.
1.1.21.1.2 SafetySafety
Intended use
The vacuum controller in the control module is part of the VAC 24seven vacuum
pumping unit and is designed for the measurement and control of vacuums in
systems intended for this purpose.
Any other use is considered improper use.
Only use the
vacuum controller in the control module
if it is in perfect working con‑
dition.
1.1.31.1.3 In this manualIn this manual
For easier readability, the term controller is used for the designation
VACUU· SELECT vacuum controller.
The illustrations in this manual are only intended to facilitate comprehension.
We reserve the right to make technical and design changes in the course of con‑
tinuous product improvement.
Intended use
Information about the
manual
6 20901531_EN_VACUU·SELECT_V1.0_010621
About this document
1.1.41.1.4 Symbols andSymbols and pictogramspictograms
Safety symbols
General
warning sign. Danger: electricity.
Electrostatically sensitive com‑
ponents ESD.
Additional symbols and pictograms
Positive example – Do this!Do this!
Result – OKOK
Negative example –
Don't do this!Don't do this!
Message: Warning Message: Error
Acoustic signal – signal sound/warning sound.
Frequency of beeping, frequency of acoustic signal
Cadmium‑free
Symbols and gestures for operation
See chapter:
3.3 Display and operating elements on page 163.3 Display and operating elements on page 16
>Additional detailed descriptions of symbols (icons) and signals on the
display can be found in chapter 3.3 Display and operating elements3.3 Display and operating elements.
Explanation
of safety symbols
Additional
symbols
720901531_EN_VACUU·SELECT_V1.0_010621
About this document
1.1.51.1.5 Handling instructions (Handling instructions (action steps)action steps)
Instructions (single step)
>Perform the step described.
5Result of action
Instructions (multiple steps)
1.1. First step
2.2. Next step
5Result of action
Perform the steps in the order described.
Instructions (shown graphically)
1.1. First step
2.2. Next step
5Result of action
1.21.2 AbbreviationsAbbreviations
abs. Absolute
ATM Atmospheric pressure (pressure graphic, program)
di(di) Interior diameter
--- ‑‑‑
Gr. Size
hh:mm:ss Time in hours/minutes/seconds
hPa Pressure unit, hectopascal (1 hPa = 1 mbar = 0.75 Torr)
max. Maximum value
min. Minimum value
mbar Pressure unit, millibar (1 mbar = 1 hPa = 0.75 Torr)
RMA no. Return Merchandise Authorization number
--- ‑‑‑
Torr Pressure unit (1 Torr = 1.33 mbar = 1.33 hPa)
USB Universal serial bus
VAC Vacuum (pressure curve)
Action steps as text
Schematic diagram
Action steps as graphics
Abbreviations
8 20901531_EN_VACUU·SELECT_V1.0_010621
About this document
resp. responsible (supervising)
e.g. for example
1.31.3
Fine vacuum Pressure measuring range in vacuum technology,
from: 1 mbar–0.001 mbar (0.75 Torr–0.00075 Torr)
Rough vacuum Pressure measuring range in vacuum technology,
from: atmospheric pressure 1 mbar
(0.75 Torr)
VACUU·BUS®Bus system from VACUUBRAND for communication
between peripheral devices with VACUU·BUS enabled
gauges and controllers. The maximum permissible
cable length is 30 m.
VACUU·BUS®
address
Address which enables VACUU·BUS clients to be
unambiguously assigned within the bus system, e.g.,
for connecting multiple sensors within the same mea‑
surement range.
VACUU·BUS®client Peripheral device or component with VACUU·BUS port
which is integrated in the bus system, e.g., sensors,
valves, level indicators, etc.
VACUU·BUS®
Assigning a dierent VACUU·BUS address to a
VACUU·BUS component using a gauge or controller.
VACUU·BUS®
connector
4‑pin round connector for the bus system from VACU‑
UBRAND.
VACUU·LAN®Local area vacuum network.
VACUU·SELECT®Product name of vacuum controller, vacuum controller
with touchscreen.
VSK 3000 Vacuum sensor for the rough vacuum range.
VSP 3000 Vacuum sensor for the ne vacuum range.
Abbreviations
Product-specic terms
920901531_EN_VACUU·SELECT_V1.0_010621
Product description
22 Product descriptionProduct description
2.12.1 VACUU·SELECT vacuum controllerVACUU·SELECT vacuum controller
The VACUU SELECT vacuum controller is a vacuum controller consisting of an
operating panel with touchscreen and various interfaces, such as USB‑A as well
as VACUU BUS and Ethernet, which are led out on the rear of the control module.
The controller was developed for applications which require a controlled vacuum.
Various applications and menus are available for operation and vacuum control.
The controller is operated using the touchscreen. The menus are designed to be
user friendly.
Depending on the type of operation and peripheral devices connected, the control‑
ler regulates the process vacuum subject to demand.
2.22.2 Product viewProduct view
Operating panel
4
3
1
2
1Display, color with touchscreen
2Chemically resistant plastic housing
3Cover of USB port, type A*, e.g., USB ash drive connection
4ON/OFF button
Side and front view
10 20901531_EN_VACUU·SELECT_V1.0_010621
About this document
Example
Ethernet connection on
control module
2.32.3 Remote control and interfacesRemote control and interfaces
The
vacuum controller in the control module
supports communication via Mod‑
bus TCP and RS‑232. This allows you to monitor or control the vacuum pumping
unit remotely from a central location, e.g., with a PC or process control system.
2.3.12.3.1 Modbus TCPModbus TCP
For remote control via Modbus TCP, use the Ethernet connection RJ45 on the back
of the control module.
Otros manuales para VAC 24seven
3
Tabla de contenidos
Otros manuales de Unidad de control de vacuubrand
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
