Vacron SA-650CF Manual de usuario

Vehicle 4-CH DVR System

USER MANUAL

2011 JAN. V1.0

Table of Contents

A. Product Features.....................................................................................1

B. Specification ............................................................................................2

C. Front Panel..............................................................................................3

D. Rear Panel ..............................................................................................3

E. Recording and Stop Recording ...............................................................4

F. System Operating Instruction ..................................................................5

G. Play Recorded File ................................................................................10

H. Format Memory Card ............................................................................16

I. Restoring Memory Card ........................................................................18

A. Product Features

Provide Video output for playing-back mode in mainframe.

Recording format: D1 and CIF

Built-in microphone.

User friendly player software, easy to operation.

Overall quick search event log.

The full recording time and date can be showing in the

monitor directly.

Wide range voltage design.

Auto-run recording after CF card plug-in and power

supplied.

CF-card is recommended for better safety and anti-

vibration performance.

Provide 4 set of alarm input ports, built-in buzzer.

Firmware can be upgraded via USB port.

Easy to install. Mini-size camera to prevent blocking the

driver's view.

Support recording audio, video and G-sensor at the same

time.

B. Specification

Item Description

Video Format NTSC PAL

Video Input 4CH Input / BNC

Audio Input 1CH Input / Harness Connector

Video Output 1CH Output /BNC

Audio Output 1CH Output /RCA

Alarm Input 4 Alarm Input

Alarm Output Buzzer

Display Mode Full Screen, 4 Split, Auto-Switch

Display Resolution 720 x 480 720 x 576

Recording

Resolution

D1 720 x 480 720 x 576

CIF 360 x 240 360 x 288

Recording Frame Max. 120 FPS Max. 100 FPS

Compression Format H.264 Technology

Operation System Embedded Linux Kernel

Triplex Record / Playback / Backup

Recording Mode Schedule Recording

Schedule Recording 15/30/60/120 Minutes

LED Indicator Power, CF1, CF2

Event Mode Alarm Trigger / Video Loss

Playback Mode Normal Speed x1

Search Function: Time / Event

Storage Type CF Card

Backup Device USB 2.0 Flash Memory Stick

Firmware Update USB

Multi-Language English / Traditional Chinese / Others (Customizable)

G Sensor G Sensor

Operation IR Remote Controller (Extending IR Lead)

Power Supply DC 8V~ 28V

Accessories Standard: Power Cable, Remote Controller, Card Reader

Optional: CF card, Extending IR Lead

Dimension 179mm x 220mm x 47mm (W x D x H)

Weight 0.92kg ( including CF card)

Operation Temperature -21℃～56℃

C. Front Panel

D. Rear Panel

Video Input

Video Output

Audio Output

USB

Power Input

DC 8-28V

Harness Connector

Alarm Input

Audio Input/Output

1. DC+12V output

2. Signal and general DC

grounding

3. Signal and general DC

grounding

4. DC8~28V IN car power

input (positive

electricity)

5. ACC starter control

6. GNDP car power

grounding(negative

electricity)

CF 1 CF 2

Power Indicator LED

CF2 Indicator LED

CF1 Indicator LED

Extending IR Lead

IR Receiver

Harness Connector:

Assorted cable includes 4

set of image input, power

core and S connector.

Video Output

E. Recording and Stop Recording

1.Power on/Recording:

Turn on the power, and it will take approximately 40 seconds to

boot up. During the recorder booting up, the CF card indicator

LED will start flashing as the recording is in progress.

Light indicator:

● Red light: light on, means power on; light off, means no

power/power off.

● Yellow light: light flashing, means CF2 take recording; light

off means non-recording.

● Green light: light flashing, means CF1 take recording; light off

means non-recording.

2.Power off/Stop recording:

Power off also stop recording, at then you can take out CF card

to read the recorded files.

Power Indicator LED

CF2 Indicator LED

CF1 Indicator LED

F. System Operating Instruction

Vehicle DVR system provides two operational methods: IR

remote controller and PC software application.

Remote controller operating instruction

As following is the key mapping table for remote controller:

Menu

Menu Remote Controller

Selecting options [Up/Down key]

Enter selecting item [Enter key]

1. Set Encode Parameter

CH2 Display

Recording

Quad Display

Up / Down / Left / Right

Fast Forward

Stop

Step/Pause

CH1 Displa

CH3 Displa

CH4 Displa

Mute

Enter

Fast Rewind

Pla