ENGLISH
- 7 -
IMPORTANT INFORMATION
For any installation problem please contact our Customer
Serviceat the number +39-0172.812411 operating Monday to
Fridayfrom 8:30 to 12:30 and from 14:00 to 18:00
V2 reserves the right to make modifications to the product
without any prior warning; furthermore, the company
declines all responsibility for damages to people or property
resulting from improper use or incorrect installation.
mRead the following instruction manual thoroughly prior to
proceeding with installation and programming of the system.
• This instruction manual is intended solely for use by technical
staff, qualified in the field of installation of automation devices.
• None of the information contained in the manual is of interest
or use to end users.
• All maintenance or programming operations should be
conducted exclusively by qualified staff.
The installation, testing and commissioning of door and
gate automation devices should be performed by qualified
and skilled personnel, who must assume responsibility
for setting up the tests envisaged depending on the risks
present; and verify compliance in accordance with legal and
regulatory requirements.
• V2 accepts no responsibility for injuries and damage resulting
from improper use of the product; other than that described in
this manual.
• Packing materials must be disposed of in full compliance with
local regulations.
• Ensure that the back-up battery cannot become immersed in
water or other liquids. Should any liquids penetrate inside the
device, disconnect it immediately from the automation device
and contact the V2 assistance service; use of the device under
such conditions may be hazardous.
• Do not store the back-up battery close to strong sources of
heat or expose it to naked flames; such actions can damage it
and be the cause of malfunctions, fire or other hazards.
• In order to avoid the risk of leakage of hazardous substances
from the back-up battery in the case where the device is not
used for long periods of time, it is preferable to disconnect it
from the automated device and store it in a dry place.
EU DECLARATION OF CONFORMITY
V2 S.p.A. hereby declares that the product ECO-LOGIC complies
with the essential requirements established in the following
directives:
- 2014/30/UE (EMC directive)
- ROHS2 2011/65/CE
Racconigi, 01/06/2016
V2 S.p.A. legal representative
Antonio Livio Costamagna
DISPOSAL
As for the installation operations, even at the end of this product’s
life span, the dismantling operations must be carried out by
qualified experts.
This product is made up of various types of materials: some can
be recycled while others need to be disposed of.
Find out about the recycling or disposal systems envisaged by your
local regulations for this product category.
Important! – Parts of the product could contain pollutants or
hazardous substances which, if released into the environment,
could cause harmful effects to the environment itself as well as to
human health.
As indicated by the symbol opposite, throwing away this product
as domestic waste is strictly forbidden. So dispose of it as
differentiated waste, in accordance with your local regulations,
or return the product to the retailer when you purchase a new
equivalent product.
Important! – the local applicable regulations may envisage heavy
sanctions in the event of illegal disposal of this product.
