V-tech S2213-10 Manual de usuario
VTech S2213-10 SIP Petite Phone - Operation Guide
Managed Services Integration and Planning
Exported on 04/18/2023
Managed Services Integration and Planning – VTech S2213-10 SIP Petite Phone - Operation Guide
– 2
Table of Contents
1 Phone Button Layout...............................................................................................4
2 Phone Usage and Operation ...................................................................................7
2.1 Receive a call ..................................................................................................................................7
2.2 Place a call......................................................................................................................................7
2.3 End a call ........................................................................................................................................7
2.4 Volume............................................................................................................................................7
2.5 Call waiting.....................................................................................................................................7
2.6 Mute ................................................................................................................................................7
2.7 Hold ................................................................................................................................................8
2.8 Transfer a call.................................................................................................................................8
Managed Services Integration and Planning – VTech S2213-10 SIP Petite Phone - Operation Guide
– 3
•
•
•
•
•
•
•
•
•
•
Table Of Contents
Phone Button Layout(see page 4)
Phone Usage and Operation(see page 7)
Receive a call(see page 7)
Place a call(see page 7)
End a call(see page 7)
Volume(see page 7)
Call waiting(see page 7)
Mute(see page 7)
Hold(see page 8)
Transfer a call(see page 8)
Managed Services Integration and Planning – VTech S2213-10 SIP Petite Phone - Operation Guide
Phone Button Layout– 4
1 Phone Button Layout
Managed Services Integration and Planning – VTech S2213-10 SIP Petite Phone - Operation Guide
Phone Button Layout– 5
Managed Services Integration and Planning – VTech S2213-10 SIP Petite Phone - Operation Guide
Phone Button Layout– 6
Managed Services Integration and Planning – VTech S2213-10 SIP Petite Phone - Operation Guide
Phone Usage and Operation– 7
2 Phone Usage and Operation
2.1 Receive a call
The telephone rings, the IN USE light and the MESSSGE WAITING LED flash when there is an incoming call.
To answer a call:
Lift the corded handset from the telephone base. The IN USE light illuminates when the phone line is in use.
2.2 Place a call
Lift the corded handset from the telephone base. Listen for a dial tone and then dial the desired number, or press a
Speed Dial key to dial a programmed number. The IN USE light illuminates when the phone line is in use.
2.3 End a call
Place the corded handset in the telephone base.
2.4 Volume
Listening volume and ringer volume can be adjusted at the telephone base.
To adjust the listening volume:
During a call, press +/VOLUME or -/VOLUME to adjust the listening volume. The next call returns to the default
listening volume.
To adjust the ringer volume:
At any time, slide the RINGER VOL switch on the right side of the telephone base to adjust the ringer volume.
2.5 Call waiting
When you hear a call waiting tone during a call, press FLASH on the telephone base to put your current call on hold
and take the new incoming call.
Press FLASH or the switch hook rapidly at any time to switch back and forth between calls.
2.6 Mute
To mute the microphone:
1.During a call, press MUTE on the telephone base. The MUTE light turns on when the mute function is turned on.
You can hear the party on the other end but they cannot hear you.
2. Press MUTE again to resume the conversation. The MUTE light turns off.
Managed Services Integration and Planning – VTech S2213-10 SIP Petite Phone - Operation Guide
Phone Usage and Operation– 8
•
•
•
2.7 Hold
To place a call on hold:
1.During a call, press HOLD on the telephone base to place that call on hold.
2. To release the call from hold, lift the corded handset.
2.8 Transfer a call
During a call, press FLASH to put the current call on hold.
When you hear a dial tone, dial the number you want to transfer the call to.
When you hear the ringing tone or the call is answered, place the corded handset back in the telephone
base. Then the call is transferred.
Tabla de contenidos
Otros manuales de Teléfono de V-tech
V-tech
V-tech SN5107 Manual de usuario
V-tech
V-tech ErisStation VCS752 Manual de instrucciones
V-tech
V-tech VT 2961 Manual de usuario
V-tech
V-tech CD1260 Manual de usuario
V-tech
V-tech VDP650 Manual de usuario
V-tech
V-tech ia5863 Manual de usuario
V-tech
V-tech ErisTerminal VSP610AErisTerminal VSP608A Manual de usuario
V-tech
V-tech DS6151 A Manual de usuario
V-tech
V-tech mi6885 Manual de usuario
V-tech
V-tech LS1500-B Manual de usuario
V-tech
V-tech VSP725 Manual de usuario
V-tech
V-tech IP5821 Manual de usuario
V-tech
V-tech LS6115 - DECT 6.0 W CALL Manual de usuario
V-tech
V-tech SIP Contemporary Series Manual de usuario
V-tech
V-tech SIP Corded Series Manual de usuario
V-tech
V-tech DECT6.0 DS6151 Manual de usuario
V-tech
V-tech i5868 Manual de usuario
V-tech
V-tech ip5852 Manual de usuario
V-tech
V-tech SIP Contemporary Series Manual de usuario
V-tech
V-tech PMX-S54 0 Series Manual de usuario
