V-tech ET6 Manual de usuario
Expansion Module
ET6
Quick Start Guide
2
Important Safety Information
This symbol is to alert you to important operating or servicing
instructions that may appear on the product or in this user’s manual.
Always follow basic safety precautions when using this product to
reduce the risk of injury, re, or electric shock.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of re, electric shock and injury, including the following:
1. This product should be installed by a qualied technician.
2. Read and understand all instructions.
3. Follow all warnings and instructions marked on the product.
4. This product is for use with VTech ET6xx phones with USB ports only.
Do not connect the expansion module to a PC or other telephones.
5. Unplug this product from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.
6. This device is for indoor use only. NOT FOR OUTDOOR USE.
7. Do not use this product near water such as near a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in a wet basement or shower.
8. Do not place this product on an unstable table, shelf, stand or other unstable
surfaces.
9. Slots and openings in the back or bottom of the expansion module are
provided for ventilation. To protect them from overheating, these openings
must not be blocked by placing the product on a soft surface such as a bed,
sofa or rug. This product should never be placed near or over a radiator or
heat register. This product should not be placed in any area where proper
ventilation is not provided.
3
10. This product should be operated only from the type of power source indicated
on the marking label. If you are not sure of the type of power supplied at the
premises, consult your dealer or local power company.
11. Do not allow anything to rest on the power cord. Do not install this product
where the cord may be walked on.
12. Never push objects of any kind into this product through the slots in the
expansion module because they may touch dangerous voltage points or
create a short circuit. Never spill liquid of any kind on the product.
13. To reduce the risk of electric shock, do not disassemble this product, but
take it to an authorized service facility. Opening or removing parts of the
expansion module other than specied access doors may expose you to
dangerous voltages or other risks. Incorrect reassembling can cause electric
shock when the product is subsequently used.
14. Do not overload wall outlets and extension cords.
15. Unplug this product from the wall outlet and refer servicing to an authorized
service facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled onto the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operation instructions. Improper adjustment of other controls may
result in damage and often requires extensive work by an authorized
technician to restore the product to normal operation.
E. If the product has been dropped and the expansion module has been
damaged.
F. If the product exhibits a distinct change in performance.
4
16. Avoid using a telephone (other than cordless) during an electrical storm.
There is a remote risk of electric shock from lightning.
17. Do not use the expansion module or its connected telephone to report a
gas leak in the vicinity of the leak. Under certain circumstances, a spark
may be created when the adapter is plugged into the power outlet, or when
the handset is replaced in its cradle. This is a common event associated
with the closing of any electrical circuit. The user should not plug the
expansion module into a power outlet if the expansion module is located in
an environment containing concentrations of ammable or ame-supporting
gases, unless there is adequate ventilation. A spark in such an environment
could create a re or explosion. Such environments might include: medical
use of oxygen without adequate ventilation; industrial gases (cleaning
solvents; gasoline vapors; etc.); a leak of natural gas; etc.
18. The power adapters are intended to be correctly oriented in a vertical or oor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
19. Use only the power cord indicated in this manual.
Power adapter rating: 5 Vdc @ 2 A
20. For pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
SAVE THESE INSTRUCTIONS
5
FCC part 15
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at the user’s expense.
WARNING: Changes or modications to this equipment not expressly approved
by the party responsible for compliance could void the user’s authority to operate
the equipment.
Industry Canada
This Class A digital apparatus complies with Canadian requirements:
CAN ICES-3 (A)/NMB-3(A). Cet appareil numérique de la classe A est conforme
à la norme NMB-003 du Canada.
6
Parts Checklist
Your expansion module package contains the following items. Save your sales
receipt and original packaging in the event warranty service is necessary.
About this Guide
This quick start guide provides a reference for the external features of the ET6
expansion module and basic installation instructions.
Please refer to the ET6 User Guide for complete installation and operation
instructions. You can download the guide from
businessphones.vtech.com.
For customer service or product information, visit our website at
businessphones.vtech.com or call 1 (888) 370-2006.
Base unit Footstand
Quick
Start
Guide
Connector
7
FUNCTION
KEYS 10-18
with LEDs
DISPLAY
AREA
FUNCTION
KEYS 1-9
with LEDs
Quick Reference Guide
External Features and Controls
8
Attaching the Footstand
The footstand can be attached at two dierent angles: 28° and 46°.
1. Place the top of the grooves on the footstand
(Fig. 1) below the slideguides on the back of
the device (Fig. 2). For the upright position, the
short “legs” of the footstand must be attached
to the device; for the more horizontal position,
use the long ones.
2. Push the footstand upwards onto the
slideguides until they lock in place (Fig. 3).
3. Place the device on an even, horizontal
surface.
Fig. 2 Fig. 3
Fig. 1
9
Connecting the ET6 to the VTech phone
This section assumes that your network infrastructure is established and that
your IP PBX phone service has been ordered and congured for your location.
For more information about installation options and phone setup, see the ET6
User Guide, available at businessphones.vtech.com.
You can connect one, two, or three ET6 expansion modules to any phone of
the ET6xx series with a USB port. The rst expansion module is supplied with
power by the phone via the module’s USB cable. The second module requires
a separately available power adapter (see “Technical Specications” on page
15). The third expansion module is supplied with power by the second module
via the third module’s USB cable.
The connector is used to connect the footstand of the rst ET6 to the footstand of
the phone, the second ET6 to the rst one, and the third ET6 to the second one
in the daisy-chain. On either side of the connector there are “hooks” (Fig. 5) that
t into the slideguides on the footstand (see Fig.1 in “Attaching the Footstand”
on page 8). Insert one of the “hooks” in the slideguide of the footstand of
the phone or ET6 and the other one in the slideguide of the footstand on the
adjoining ET6, then sled the connector downward until the “hooks” lock into
place.
Fig. 4 Fig. 5
10
Connecting one ET6 expansion module
• Insert the USB plug attached to the cable of the VTech ET6 into the USB port
on the VTech phone. If the phone has two USB ports, either one of them can
be used (Fig. 6 and Fig. 7).
The LEDs on the ET6 expansion module will light up briey if or when the
phone is connected to power, then turn o, indicating that the function keys
are now ready for conguration and/or use.
If the ET6 expansion module is not listed in Settings > Preferences >
Fkeys > Keys on UXM 1, reboot the phone.
Fig. 6 Fig. 7
Tabla de contenidos
Otros manuales de Accesorios para teléfono de V-tech
V-tech
V-tech VT9042 Manual de usuario
V-tech
V-tech gz5838 Manual de usuario
V-tech
V-tech SN6307 Manual de usuario
V-tech
V-tech VH621 Manual de usuario
V-tech
V-tech DS6421-2 Manual de usuario
V-tech
V-tech LS6105 Manual de usuario
V-tech
V-tech CS6409 Manual de usuario
V-tech
V-tech LS916 Manual de usuario
V-tech
V-tech LS6001 Manual de usuario
V-tech
V-tech gz5838 Manual de usuario
V-tech
V-tech ErisTerminal VSP601A Manual de usuario
V-tech
V-tech LS6005 Manual de usuario
V-tech
V-tech TR02-2013 Manual de usuario
V-tech
V-tech VSMART VS014 Manual de usuario
V-tech
V-tech ES1510A Manual de usuario
V-tech
V-tech SN6167 Manual de usuario
V-tech
V-tech CM18045 Manual de usuario
V-tech
V-tech DS6151 - 6.0 Expandable Cordless Phone Manual de usuario
V-tech
V-tech LS6105 Manual de usuario
