UTStarcom UT-300R2U Manual de usuario

UTStarcom®UT-300R2U

ADSL Router

USER GUIDE

UTStarcom, Inc.

No part of this documentation may be reproduced in any form or by any means or used to make any

derivative work (such as translation, transformation, or adaptation) without prior, express and written

permission from UTStarcom, Inc.

UTStarcom, Inc. reserves the right to revise this documentation and to make changes in content

from time to time without obligation on the part of UTStarcom, Inc. to provide notification of such

revision or changes.

UTStarcom, Inc. provides this documentation without warranty of any kind, implied or expressed,

including but not limited to, the implied warranties of merchantability and fitness for a particular

purpose. UTStarcom may make improvements or changes in the product(s) and/or the program(s)

described in this documentation at any time.

UNITED STATES GOVERNMENT LEGENDS:

If you are a United States government agency, then this documentation and the software described

herein are provided to you subject to the following:

United States Government Legend: All technical data and computer software is commercial in

nature and developed solely at private expense. Software is delivered as Commercial Computer

Software as defined in DFARS 252.227-7014 (June 1995) or as a commercial item as defined in

FAR 2.101(a) and as such is provided with only such rights as are provided in UTStarcom's

standard commercial license for the Software. Technical data is provided with limited rights only as

provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is

applicable. You agree not to remove or deface any portion of any legend provided on any licensed

program or documentation contained in, or delivered to you in conjunction with, this User Guide.

UTStarcom, the UTStarcom logo, PAS, mSwitch, Airstar, WACOS, Netman, Total Control, and

CommWorks are registered trademarks of UTStarcom, Inc. and its subsidiaries. The UTStarcom

name, AN-2000, and the CommWorks logo are trademarks of UTStarcom, Inc. and its subsidiaries.

Other brand and product names may be registered trademarks or trademarks of their respective

holders.

Any rights not expressly granted herein are firmly reserved.

Table of Contents

1. OVERVIEW .....................................................................................................................1

1.1 ABOUT ADSL ......................................................................................................................... 1

1.2 ABOUT ADSL2/2+ .................................................................................................................. 1

1.3 SETUP WIZARD ..................................................................................................................... 1

1.4 INSTALLATION NOTES ......................................................................................................... 1

1.4.1 ADSL ACCOUNT.............................................................................................................................................. 1

1.4.2 LOW PASS FILTERS ....................................................................................................................................... 1

1.4.3 OPERATING SYSTEMS .................................................................................................................................. 1

1.4.4 WEB BROWSER .............................................................................................................................................. 1

1.4.5 USB PORT OR ETHERNET PORT (NIC ADAPTER) ...................................................................................... 2

1.4.6 ADDITIONAL SOFTWARE............................................................................................................................... 2

2. SPECIFICATION .............................................................................................................3

2.1 INTERFACE INTRODUCTION ............................................................................................... 3

2.1.1 INDICATOR AND INTERFACE ........................................................................................................................ 3

2.1.2 FRONT PANEL DISPLAY ................................................................................................................................ 4

2.1.3 REAR PANEL CONNECTIONS........................................................................................................................ 4

2.2 HARDWARE CONNECTION .................................................................................................. 4

2.2.1 CONNECT ROUTER TO ETHERNET.............................................................................................................. 4

2.2.2 COMPUTER TO ROUTER CONNECTION ...................................................................................................... 4

2.2.3 CONNECT ADSL LINE..................................................................................................................................... 5

2.2.4 CONNECT USB CABLE................................................................................................................................... 5

2.2.4 POWER ON ROUTER...................................................................................................................................... 6

2.2.5 FACTORY RESET BUTTON............................................................................................................................ 6

3. CONFIGURATION...........................................................................................................7

3.1 ACCESS THE CONFIGURATION MANAGER....................................................................... 7

3.1.1 LOGIN TO HOME PAGE.................................................................................................................................. 7

3.1.2 CONFIGURE THE ROUTER............................................................................................................................ 8

3.1.3 CHANGE SYSTEM PASSWORD..................................................................................................................... 9

3.2 SETUP WIZARD ................................................................................................................... 10

3.2.1 SETUP WIZARD – OPENING WINDOW ....................................................................................................... 11

3.2.2 SETUP WIZARD – CHOOSE TIME ZONE..................................................................................................... 12

3.2.3 SETUP WIZARD – SELECT ISP CONNECTION TYPE.................................................................................13

3.2.4 SETUP WIZARD – FOR DYNAMIC IP ADDRESS CONNECTIONS:............................................................. 14

3.2.5 SETUP WIZARD – FOR STATIC IP ADDRESS CONNECTIONS: ................................................................ 15

3.2.6 SETUP WIZARD – FOR PPPOE/PPPOA CONNECTIONS: .......................................................................... 16

3.2.7 SETUP WIZARD – FOR BRIDGE MODE CONNECTIONS: .......................................................................... 17

3.2.8 SETUP WIZARD – FINISH............................................................................................................................. 18

3.2.9 SETUP WIZARD – CONFIRMATION ............................................................................................................. 19

3.3 WAN CONFIGURATION....................................................................................................... 20

3.3.1 DYNAMIC IP ADDRESS ................................................................................................................................ 21

3.3.2 STATIC IP ADDRESS .................................................................................................................................... 23

3.3.3 PPPOA/PPPOE .............................................................................................................................................. 25

3.3.4 BRIDGE MODE .............................................................................................................................................. 27

4 OTHER CONFIGURATION ............................................................................................29

4.1 DHCP CONFIGURATION..................................................................................................... 29

4.1.1 DHCP SERVER CONFIGURATION............................................................................................................... 30

4.1.2 DHCP RELAY CONFIGURATION.................................................................................................................. 31

4.2 DNS CONFIGURATION ....................................................................................................... 32

4.3 MULTIPLE VIRTUAL CONNECTION CONFIGURATION .................................................... 33

4.4 UPNP CONFIGURATION ..................................................................................................... 34

4.5 VIRTUAL SERVER CONFIGURATION ................................................................................ 35

4.6 SNMP CONFIGURATION..................................................................................................... 36

4.7 FILTER CONFIGURATION................................................................................................... 37

4.8 ROUTING CONFIGURATION .............................................................................................. 39

4.9 DMZ CONFIGURATION ....................................................................................................... 40

4.10 FIREWALLCONFIGURATION ............................................................................................ 41

4.11 RIP CONFIGURATION....................................................................................................... 42

4.12 PPP CONFIGURATION...................................................................................................... 43

4.13 ADSL CONFIGURATION.................................................................................................... 44

4.14 ATM VCC CONFIGURATION............................................................................................. 45

5. TOOLS AND MISCELLANEOUS..................................................................................46

5.1 ADMIN CONFIGURATION ................................................................................................... 46

5.2 TIME CONFIGURATION ...................................................................................................... 47

5.3 SYSTEM CONFIGURATION ................................................................................................ 49

5.4 FIRMWARE CONFIGURATION ........................................................................................... 50

5.5 MISC. CONFIGURATION ..................................................................................................... 51

5.6 TEST CONFIGURATION...................................................................................................... 53

5.6 DEVICE INFORMATION....................................................................................................... 54

5.7 LOG INFORMATION ............................................................................................................ 55

5.8 TRAFFIC STATISTICS ......................................................................................................... 56

5.9 ADSL INFORMATION........................................................................................................... 57

5.10 HELP................................................................................................................................... 58

6 TROUBLESHOOTING ...................................................................................................59

6.1 CONFIGURING IP SETTINGS ON YOUR COMPUTER...................................................... 59

6.1.1 CONFIGURE WINDOWS XP FOR DHCP...................................................................................................... 60

6.1.2 WINDOWS 2000............................................................................................................................................. 62

6.1.3 CONFIGURE WINDOWS 2000 FOR DHCP .................................................................................................. 62

6.1.4 WINDOWS 95 AND WINDOWS 98 ................................................................................................................ 63

6.1.5 CONFIGURE WINDOWS 95 AND WINDOWS 98 FOR DHCP ...................................................................... 63

6.1.6 WINDOWS ME ............................................................................................................................................... 63

6.1.7 CONFIGURE WINDOWS ME FOR DHCP ..................................................................................................... 63

6.1.8 WINDOWS NT 4.0 WORKSTATIONS............................................................................................................ 63

6.1.9 CONFIGURE WINDOWS NT 4.0 FOR DHCP................................................................................................ 64

6.2 LOW PASS FILTERS FOR ADSL......................................................................................... 65

6.2.1 IN-LINE FILTER.............................................................................................................................................. 65

6.2.2 THREE PORT FILTER ................................................................................................................................... 66

ANNEX: SHIPPING LIST ..................................................................................................67

Chapter 1. Overview 1

1. OVERVIEW

1.1 ABOUT ADSL

Asymmetric Digital Subscriber Line (ADSL) is a broadband network technology that utilizes standard twisted-pair

copper wire telephone lines to enable broadband high-speed digital data transmission and bandwidth hungry applications

for business and residential customers.

ADSL routers and modems provide faster downloads and more reliable connectivity to the user without loss of

quality or disruption of voice/fax telephone capabilities.

ADSL service operates at speeds of up to 8 Mbps downstream and up to 640 Kbps upstream. A secure dedicated

point-to-point connection is established between the user and the central office of the service provider.

1.2 ABOUT ADSL2/2+

Transmission performance of ADSL2 has improved compared with the first generation of ADSL. These

improvements are mainly concerned with long distance, anti-line-loss, anti-noise, etc. By doubling the transmission

bandwidth, ADSL2+ has implemented a downlink rate as high as 24 Mbps. Therefore, Internet applications such as

synchronous transmission of multi-video streams, online gaming, and the ability to download very large files are possible.

1.3 SETUP WIZARD

Once you access the web interface use the Setup Wizard to configure the Router’s ADSL Internet connection. Most

ADSL subscribers will be able to establish their Internet connection using the Setup Wizard.

1.4 INSTALLATION NOTES

In order to establish a connection to the Internet it will be necessary to provide information to the Router that will

be stored in its memory. For some users, only their account information (User Name and Password) is required. For

others, various parameters that control and define the Internet connection will be required.

1.4.1 ADSL ACCOUNT

It is necessary to have an account set up with an ADSL broadband Internet service provider before the Router

can establish an Internet connection for your private network.

1.4.2 LOW PASS FILTERS

Since ADSL and telephone services share the same copper wiring to carry their respective signals, a filtering

mechanism may be necessary to avoid mutual interference. A low pass filter device can be installed for each telephone

that shares the line with the ADSL line. These filters are easy to install passive devices that connect to the ADSL device

and/or telephone using standard telephone cable. Ask your service provider for more information about the use of low

pass filters with your installation.

1.4.3 OPERATING SYSTEMS

The UT-300R2U uses an HTML-based web interface for setup and management. The web configuration

manager may be accessed using any operating system capable of running web browser software, including Windows 98

SE, Windows ME, Windows 2000, and Windows XP.

1.4.4 WEB BROWSER

Any common web browser can be used to configure the Router using the web configuration management

software. The web browser must have JavaScript enabled. JavaScript is enabled by default on many browsers. Make

sure JavaScript has not been disabled by other software (such as virus protection or web user security packages) that

may be running on your computer.

Chapter 1. Overview 2

1.4.5 USB PORT OR ETHERNET PORT (NIC ADAPTER)

Any computer that uses the Router must be able to connect to it through either the Ethernet port or USB port on

the Router. The easiest method of installation is via the Ethernet connection and therefore requires that your computer

be equipped with an Ethernet port as well. Most notebook computers are now sold with an Ethernet port already

installed. Likewise, most fully assembled desktop computers come with an Ethernet NIC adapter as standard equipment.

If your computer does not have an Ethernet port and you do not wish to use a USB connection, you must install an

Ethernet NIC adapter before you can use the Router. If you must install an adapter, follow the installation instructions

that come with the Ethernet NIC adapter.

1.4.6 ADDITIONAL SOFTWARE

It may be necessary to install software on client computers that enables them to access the Internet. Additional

software must be installed if UT-300R2U is used as a simple bridge. For a bridged connection, the information needed to

make and maintain the Internet connection is stored on another computer or gateway device, not in the Router itself. This

software may be a form of PPP client software that is provided by your ADSL service. Follow the instructions of your

service provider if you need to install software on client host computers.

Note

If you plan to use the UT-300R2U’s USB port to connect to your computer, do not

connect the USB cable to the Router until you have finished all of the steps to install the

USB driver, and your computer has restarted.

Chapter 2. Specification 3

2. SPECIFICATION

2.1 INTERFACE INTRODUCTION

2.1.1 INDICATOR AND INTERFACE

Table 2.1

ITEM Name State introduction

Power A steady green light means the power connection

works properly.

Status Blinking green indicates normal operation. A system

failure is indicated by either green or an unlit LED.

xDSL

Link/Act

Solid green indicates a good ADSL link. Blinking

green indicates an active connection.

Ethernet

Link/Act

Solid green indicates a good Ethernet link. Blinking

green indicates an active connection.

Indicator

USB

Link/Act

Solid green indicates a good USB link. Blinking

green indicates an active connection.

Line Connected with phone line or “ADSL” port of the

splitter.

Ethernet

To be connected to a PC network card by a straight-

through network cable, also can use a crossover

cable to connect to Hub, Switch or Router.

USB To connect to a USB device through a Type B

connector.

Power Power interface, Connect with power adapter.

Reset

Button

Reset to default setting.

Press the button for 5 seconds. Then you can reset

the Router with the default value.

Interface

Power

Button To turn the power off and on.

Chapter 2. Specification 4

2.1.2 FRONT PANEL DISPLAY

Place the Router in a location that permits an easy view of the LED indicators on the front panel.

2.1.3 REAR PANEL CONNECTIONS

All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on

the Router. Use the Reset button to restore the settings to the factory default values in the next chapter for instructions

on using the reset button).

2.2 HARDWARE CONNECTION

The Router maintains three separate interfaces, an ADSL, an Ethernet, and a USB interface. Place the Router

in a location where it can be connected to the various devices as well as to a power source. The Router should not be

located where it will be exposed to moisture or excessive heat. Make sure the cables and power cord are placed safely

out of the way so they do not create a tripping hazard. As with any electrical appliance, observe common sense safety

procedures.

The Router can be placed on a shelf or desktop, ideally you should be able to see the LED indicators on the

front if you need to view them for troubleshooting.

2.2.1 CONNECT ROUTER TO ETHERNET

The Router may be connected to a single computer or Ethernet device through the 10/100 BASE-TX Ethernet

port on the rear panel. Any connection to an Ethernet concentrating device such as a switch or hub must operate at a

speed of 10/100 Mbps only. When connecting the Router to any Ethernet device that is capable of operating at speeds

between 0~100Mbps, be sure that the device has auto-negotiation (NWay) enabled for the connecting port.

Use standard twisted-pair cable with RJ-45 connectors. The Ethernet ports are auto MDI-II/MDI-X so you may

connect with either MDI-II through or MDI-X crossed ports. The rules governing Ethernet cable lengths apply to the LAN

to Router connection. Be sure that the cable connecting the LAN to the Router does not exceed 100 meters.

2.2.2 COMPUTER TO ROUTER CONNECTION

You can connect the Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC or

notebook computer.

Chapter 2. Specification 5

2.2.3 CONNECT ADSL LINE

Use the ADSL (telephone) cable included with the Router to connect it to a telephone wall socket or receptacle.

Plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Router and insert the other end

into the RJ-11 wall socket. If you are using a low pass filter device, follow the instructions included with the device or

given to you by your service provider. Access to the Internet for all workstations on the Ethernet LAN is provided through

the ADSL port. This is the physical connection for all devices using the Router to the Wide Area Network (WAN) or

Internet.

2.2.4 CONNECT USB CABLE

The CD-ROM shipped with the Router contains the USB driver software. Insert the CD-ROM into the CD drive.

Within a few seconds, you should see a window that offers the following options: Install UT-300R2U, Quick Install Guide,

View Manual, Install Acrobat Reader, and Exit. If you do not see this auto-run pop-up window, explore the CD-ROM and

double-click the setup application file autorun.exe or find the file Setup.exe in the folder labeled USBDRIVER and

double-click it to launch the installation software. The auto-run USB driver setup must be completed before connecting

the router to your PC with the USB cable. To install the driver follow these instructions:

1. Click the Install UT-300R2U link in the to launch the USB driver installation software.

2. Click Next on the InstallShield window.

3. Click Install to begin the installation.

4. Click Finish to complete the InstallShield wizard.

When the USB driver has been installed, insert one end of the USB cable included with the Router into the

Router’s USB port. Insert the other end of the USB cable into a USB port on your PC. Connect the power adapter to the

power input at the back panel of the Router and then plug the other end of the power adapter to a wall outlet or power

strip. On the front of the device, the Power LED will turn ON to indicate proper operation. Insert the telephone cable

included with the Router into the ADSL port, and then connect the cable to your telephone line. Check the LED display

on the front of the Router to confirm that the connections have been made.

Chapter 2. Specification 6

2.2.4 POWER ON ROUTER

CAUTION: The Router must be used with the power adapter included with the device.

To power on the Router:

1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug

the adapter into a suitable nearby power source.

2. Push the power button in to toggle the power on.

3. You should see the Power LED indicator light up and remain lit. The Status LED should light solid green and

begin to blink after a few seconds.

4. If the Ethernet port is connected to a working device, check the Ethernet Link/Act LED indicators to make sure

the connection is valid. The Router will attempt to establish the ADSL connection, if the ADSL line is connected

and the Router is properly configured this should light up after several seconds. If this is the first time installing

the device, some settings may need to be changed before the Router can establish a connection.

2.2.5 FACTORY RESET BUTTON

The Router may be reset to the original factory default settings by depressing the reset button for a few seconds

while the device is powered on. Use a ballpoint or paperclip to gently push down the reset button. Remember that this

will wipe out any settings stored in flash memory including user account information and LAN IP settings. The device

settings will be restored to the factory default IP address 192.168.1.1 and the subnet mask is 255.255.255.0, the default

management Username is admin and the default Password is admin.

The Router may also be reset to factory default configuration settings through the web management interface.

Go to the Firmware menu in the Tools directory to reset the device using the web manager.

Otros manuales para UT-300R2U

Tabla de contenidos

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad